Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AD1139J by Analog Devices is an 18-bit D/A converter with a max analog output voltage of ±10 V. It operates on ±15 V power supplies, has a linearity error of 0.0004%, and settling time of 60 µs. Ideal for applications requiring precise analog signal generation in commercial temperature environments.
Median Price
$2,574.030
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
DigiKey
1+ parts
$2,508.410
100+ parts
-
1k+ parts
10k+ parts
Analog Devices Inc
Verical
$2,866.757
Digiode
$2,445.328
Nova Conductors
$3,010.100
Vyrian
VNN
Chip Stock
Bristol Electronics
Manotoh
Lantek
Microchip USA
$1.000
Corohmni
$15.862
AZTECH Wire
$18.275
Parana Technologies
$20.216
$18.801
IDEA Electronic Components Group
$21.738
$20.651
DigiPath Technology Company
$33.911
$32.555
Ampacity Inc.
$2,187.930
Corphita
$2,316.627
Aranea Global
$2,949.898
$2,831.902
Argo Parts USA
Vigor
Continental Prestige Electronics
Futuretech Components
Perfect Parts
Authorized Procurement Solutions
Assy Fe
The maximum analog output voltage of 10V allows for a wide range of output signals, making this product versatile for various applications.
With 18 bits, this digital-to-analog converter offers high resolution and precision in converting digital signals to analog, resulting in smoother and more accurate output.
The fast settling time of 60 microseconds ensures rapid response and stability in the output signal, making it suitable for real-time applications.
The high maximum operating temperature of 70°C allows for reliable performance in a wide range of environments and conditions.
The nominal supply voltage of 15V provides ample power for the converter to operate efficiently and accurately, ensuring consistent performance.
Digital-to-Analog Converters AD1139J attributes and parameters. Explore more Digital-to-Analog Converters devices from Analog Devices
Technology:
Sub-Category:
Input Format:
Input Bit Code:
Maximum Linearity Error (EL):
Nominal Settling Time (tstl):
Maximum Supply Current:
No. of Bits:
No. of Functions:
Nominal Supply Voltage:
Minimum Analog Output Voltage:
Maximum Analog Output Voltage:
Power Supplies:
Nominal Negative Supply Voltage:
Minimum Operating Temperature:
Maximum Operating Temperature:
Temperature Grade:
No. of Terminals:
Terminal Form:
Terminal Position:
Terminal Pitch:
Terminal Finish:
Surface Mount:
Width:
Length:
Maximum Seated Height:
Package Shape:
Package Style:
Package Code:
Package Equivalence Code:
Qualified:
JESD-30 Code:
JESD-609 Code:
AD1139J Converters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 04/Oct/2022 Mult Dev LTB Review 04/Oct/2023
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
Central Semiconductor
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
06035C104KAT2A
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LTC2642IMS-14#PBF
Analog Devices
LTC2642IMS-14#PBF by Analog Devices is a 14-bit D/A converter with max output voltage of ±2.5V, 0.0061% linearity error, and 1us settling time. Ideal for industrial applications requiring precise analog signal generation in a compact package with small outline design and serial input format.
AD5553CRMZ
AD5553CRMZ by Analog Devices is a 14-bit D/A converter with 0.0061% linearity error, 0.5 us settling time, and 5V supply voltage. It is ideal for industrial applications requiring precise analog signal generation in a compact square package with surface mount capability.
DAC8811ICDGKTG4
DAC8811ICDGKTG4 by Texas Instruments is a 16-bit D/A converter with 0.0015% linearity error and 0.5 us settling time. Ideal for industrial applications, it operates at -40 to 85 °C with 3/5 V supplies, featuring a small outline package and gull wing terminals for compact designs.
DAC088S085CISQX/NOPB
DAC088S085CISQX/NOPB by Texas Instruments is an 8-bit D/A converter with a max analog output voltage of 5.5V and settling time of 4.5us. Ideal for automotive applications, it operates in temperatures ranging from -40 to 125°C, featuring a sample rate of 0.22MHz and low supply current of 0.84mA.
LTC2604IGN-1#TRPBF
Linear Technology
D/A CONVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;
DAC7731EC
DAC7731EC by Texas Instruments is a 16-bit D/A converter with max analog output voltage of ±10 V. It operates at industrial temperature range (-40 to 85°C) and has a settling time of 5 µs. Ideal for applications requiring precise analog signal generation in compact spaces, it features a small outline package with dual terminal position and Gull Wing form factor.
AD5683RACPZ-1RL7
AD5683RACPZ-1RL7 by Analog Devices is a 16-bit D/A converter with max output voltage of 5.005V and linearity error of 0.0122%. It operates in industrial temperature range (-40 to 105°C) and uses serial input format, making it ideal for precision control systems and instrumentation applications.
LTC1446IN8#PBF
LTC1446IN8#PBF by Analog Devices is a 12-bit D/A converter with max output voltage of 4.145V and linearity error of 0.1221%. It operates in industrial temperature range, making it suitable for precision control systems and instrumentation applications. With a settling time of 14us, this CMOS technology device offers high performance in a compact IN-LINE package.
DAC8043UC
DAC8043UC by Texas Instruments is a 12-bit D/A converter with 1us settling time and 0.0122% linearity error. Ideal for industrial applications, it operates at -40 to 85°C, has a sample rate of 0.284MHz, and requires only 0.5mA supply current.
AD420ARZ-32-REEL
AD420ARZ-32-REEL by Analog Devices is a 16-bit Digital-to-Analog Converter (DAC) with a max analog output voltage of 5V. It operates on a power supply of 24V and has a max settling time of 3000us. This DAC is commonly used in industrial applications requiring precise analog signal generation.
AD5754AREZ
AD5754AREZ by Analog Devices is a 16-bit digital-to-analog converter (DAC) with a max analog output voltage of 10.8 V. It operates on power supplies of 3/5, ±5/±15 V and has a max settling time of 12 us. This DAC is commonly used in industrial applications requiring precise analog voltage outputs.
LTC2601CDD#TRPBF
D/A CONVERTER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE;
DAC7731EB
DAC7731EB by Texas Instruments is a 16-bit D/A converter with max analog output voltage of ±10 V and settling time of 5 us. Ideal for industrial applications, it operates at temperatures ranging from -40 to 85 °C, with input format being serial binary.
DAC7611U
Burr-Brown Corporation
D/A CONVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TLV5630IDW
TLV5630IDW by Texas Instruments is a 12-bit D/A converter with max output voltage of 5.1V and settling time of 7us. Ideal for industrial applications, it operates at temperatures from -40 to 85°C, with a sample rate of 0.283MHz and power supplies of 3/5V.
LTC1257IS8
LTC1257IS8 by Analog Devices is a 12-bit D/A converter with 0.0977% max linearity error. It operates in industrial temperature range (-40 to 85°C) and has a serial input format. This small outline package is ideal for applications requiring precise analog signal generation.
DAC7725UB/1K
D/A CONVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR;
AD5668ARUZ-2REEL7
AD5668ARUZ-2REEL7 by Analog Devices is a 16-bit DAC with max output voltage of 5.5V and settling time of 10us. Ideal for industrial applications, it operates b/w -40 to 105°C, consumes 2.5mA supply current at 5V, and features a serial input format for binary code conversion.
AD5422AREZ
AD5422AREZ by Analog Devices is a 16-bit Digital-to-Analog Converter with a max output voltage of ±10 V and settling time of 25 µs. It is ideal for industrial applications requiring precise analog signal generation, featuring a small outline package and serial input format for ease of integration.
AD5760BCPZ
AD5760BCPZ by Analog Devices is a 16-bit DAC with 0.0015% EL, settling time of 2.5 us, and 14 mA max supply current. Ideal for automotive applications, it operates b/w -40 to 125 °C with BICMOS technology and SERIAL input format.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD1139K
D/A CONVERTER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 32; Package Code: DIP; Package Shape: RECTANGULAR;
AD1145A
D/A CONVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 44; Package Code: QCCN; Package Shape: SQUARE;
AD1145AG
D/A CONVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: PIN/PEG; No. of Terminals: 44; Package Code: PGA; Package Shape: SQUARE;
AD1145B
AD1145BG
AD1147
D/A CONVERTER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 32; Package Code: DIP; Package Shape: RECTANGULAR;
AD1148
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved