Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY;
Median Price
$0.493
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Future Electronics
1+ parts
$0.290
100+ parts
$0.280
1k+ parts
$0.270
10k+ parts
$0.255
Heilind Electronics
$0.318
-
$0.305
$0.293
Interstate Connecting
Farnell
$0.492
$0.330
$0.269
Arrow
$0.340
$0.295
$0.283
Mouser Electronics
$0.560
$0.383
$0.334
$0.314
DigiKey
$0.610
$0.440
$0.374
$0.351
RS (Exports)
$22.230
Element14
$27.060
Verical
$33.216
TTI Europe
$33.540
Newark
$33.790
$25.780
$25.450
Master Electronics
$0.388
$0.303
$0.260
Chip1Stop
$0.326
$0.316
TTI
$0.277
$0.274
PSC Electronics
Distrelec
J2 Sourcing AB
ACDS - Activité Composants Distribution Service
Quittner & Schimek s.r.o.
Gateway Technologies
$5.000
$4.450
Singapore Electronics
$5.500
$5.115
$4.895
$4.674
Perfect Parts
Abacus Technologies
Assembly Products VN0201500471 attributes and parameters. Explore more Assembly Products devices from Amphenol
Connector Accessory Type:
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
LM358DR2G
Onsemi
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
1N4148WT
Formosa Microsemi
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
293736-1
TE Connectivity
TE Connectivity's 293736-1 is a male power contact with max operating temp of 85°C and min of -20°C. It supports wire size up to 0 AWG, made of polyamide. Ideal for assembly products requiring high-power connections in various industries.
747784-8
TE Connectivity 747784-8 is a JACK SCREW for CABLE CONNECTORS. Made of STAINLESS STEEL, it supports up to 0 AWG wire size. Mounting options include #4-40 and SCREW, ideal for various assembly applications.
DTM06-6S-C017
TE Connectivity's DTM06-6S-C017 is a FEMALE contact assembly product with 7.5A rated current and 250V rated DC voltage. It can handle temperatures from -55°C to 125°C, with cable entries ranging from 0.053" to 0.12". Ideal for power and signal applications.
3-770476-1
TE Connectivity's 3-770476-1 is a PHOSPHOR BRONZE CONTACT for SL-156 HOUSING. It has a rated voltage of 250V, rated current of 10A, and can accommodate wire sizes from 24 AWG to 18 AWG. Ideal for applications requiring FEMALE contacts in POWER designs with operating temperatures ranging from -55°C to 105°C.
39-00-0381
Molex
7824.6509.0
1-66101-9
TE Connectivity's 1-66101-9 is a crimp terminal contact designed for CPC/G Series/M Series connectors. With a finish thickness of 100, it can handle wire gauges ranging from 16 AWG to 18 AWG and has a rated current of 13 A. This connector accessory is made of brass and is suitable for power and signal applications.
16-02-0083
Molex 16-02-0083 is a CRIMP CONTACT for 24-30 AWG wires, FEMALE gender, SQUARE PIN-SOCKET style. Used in Assembly Products with STRAIGHT mounting style for various applications.
3200030
Phoenix Contact
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; Assembly Item Name: FERRULE; DIN Conformity: NO; Maximum Operating Temperature: 105 Cel;
3200548
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Material: COPPER ALLOY; Approvals (V): CSA; UL; IEC Conformity: NO; Maximum Operating Temperature: 105 Cel;
2CTC-R
Adam Tech
The Adam Tech 2CTC-R is a CRIMP terminal with a rated current of 2A and contact resistance of 20 mohm. It supports wire sizes from 28 to 22 AWG, ideal for applications requiring FEMALE contacts in straight mounting style with SQ PIN-SKT design. Operating temperatures range from -25°C to 85°C.
1727040100
Molex 1727040100 BACKSHELL for FCT D-SUB features 0.118" to 0.335" cable entry, ZINC ALLOY material, and -35°C to 100°C operating temp. Mounting options include SCREW or 4-40 UNC. Ideal for securing cables in electronic assemblies.
1731110082
Molex 1731110082 is a zinc alloy BACKSHELL for D-SUB CONNECTOR with 0.118" to 0.335" cable entry. It can operate b/w -35°C to 100°C, mounted using 4-40 UNC screws. Ideal for applications requiring secure cable connections in various environments.
RJFTVC6ZN
1-968857-1
TE Connectivity 1-968857-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 13 AWG and rated current of 22 A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.
281934-4
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; IEC Conformity: NO; MIL Conformity: NO; Material: LSR; Maximum Operating Temperature: 130 Cel;
08-50-0032
Molex 08-50-0032 contact features crimp terminal type, compression contact style, and brass material. Ideal for applications requiring female contacts with wire sizes ranging from 30 AWG to 22 AWG. Suitable for straight mounting in assembly products with a finish thickness of 120 and 0.062 inch max cable entry.
172063-0312
The Molex 172063-0312 CONTACT features CRIMP terminal type, FEMALE contact gender, and COPPER ALLOY material. It is used with wire sizes up to 12 AWG in applications such as 170001 and 171692 assemblies. The CONTACT has a finish thickness of 15 units and a terminal length of 0.298 inch for STRAIGHT mounting style.
8655MH1501BLF
AMPHENOL ICC
Amphenol Icc's 8655MH1501BLF is a UL-approved HOOD with zinc alloy material. It has a min cable entry of 0.157" and max operating temperature of 120°C. Ideal for applications requiring UNC 4.40 mounting option and jack screw assembly in temperatures ranging from -40°C to 120°C.
WP-4P
CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Usage: DTP SERIES; IEC Conformity: NO; DIN Conformity: NO; Assembly Item Name: WEDGE LOCK;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved