Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TJS-102 by Amphenol is a MIL-conformant telecom & datacom connector with 4 contacts, female crimp termination, and jack body style. It is used for cable mounting and mates with M9177/1-1 and M9177/2-1 connectors in telecommunications and data communication applications.
Median Price
$51.590
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
TTI
1+ parts
$44.860
100+ parts
$41.880
1k+ parts
-
10k+ parts
DigiKey
$58.320
$42.145
Verical
Vyrian
Kallista Electronics Ltd
Nova Conductors
R&J Components
Gateway Technologies
$6.000
$5.339
Singapore Electronics
$6.600
$6.137
$5.873
$5.609
AZTECH Wire
$21.550
Ampacity Inc.
$27.370
Authorized Procurement Solutions
Continental Prestige Electronics
Argo Parts USA
Aranea Global
This product meets MIL standards, ensuring reliability and durability in military and other rugged applications.
Specifically designed for telecom and datacom applications, providing optimal performance and compatibility in these industries.
Provides sufficient connectivity options for various devices and systems in telecom and datacom networks.
Easy to install on cables, making it convenient for technicians and reducing installation time.
Compatible with specific mating connectors, ensuring secure and reliable connections in data and telecom systems.
Crimp terminations provide a secure connection between the cable and connector, minimizing signal loss and ensuring data integrity.
Female connectors are typically used for input ports, making this product suitable for connecting devices and equipment in data and telecom networks.
Jack-style connectors are commonly used in telecom and datacom applications, providing a standard interface for compatible devices.
Telecom & Datacom Connectors TJS-102 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Connector Type:
Contact Gender:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Type:
Option:
Termination Type:
Total No. of Contacts:
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
Bourns
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
ULN2803ADWR
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
1N4148
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
RC0603FR-071KL
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
449150011
Molex
Molex 449150011 is a Telecom & Datacom Connector with 0.46" body length, 500000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for telecom applications, it features POLYCARBONATE insulator material, UL94V-0 flammability rating, and supports 8 contacts with wire sizes ranging from 22 to 28 AWG.
7499010211A
Wuerth Elektronik & Kg
7499010211A by Wurth Elektronik is a Telecom & Datacom Connector with Filter Feature, Polyethylene Insulator, and Tin over Nickel Termination. It has 8 contacts, right angle mounting style, and solder termination type. Ideal for telecom and datacom applications requiring reliable connectivity in board-mounted configurations.
10118192-0001LF
Amphenol Communications Solutions
Amphenol's 10118192-0001LF USB connector features gold over nickel termination, liquid crystal polymer insulator, and matte tin shell finish. Ideal for telecom/datacom applications, with 100VAC dielectric voltage, 5 contacts, and 80°C max operating temp. Perfect for board mounting with right-angle style and surface mount termination.
43860-0017
Molex 43860-0017 is a telecom & datacom connector with 0.645" body length, 0.533" width, and 0.62" depth. It has an insulation resistance of 500M ohm, operates b/w -40°C to 85°C, and features a nickel shell finish. Ideal for board mounting with UL certification, this female connector has 6 contacts and solder termination for commercial applications.
1932055-1
TE Connectivity
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
91483-041
Fci
91483-041 by Fci is a Telecom & Datacom Connector with 0.3" body width and 1.291" depth. Featuring POLYAMIDE insulator, TIN shell finish, and 8 contacts for 3A signal current, it's ideal for telecom and datacom applications requiring crimp termination on cables.
10033526-N3212LF
10033526-N3212LF by Amphenol is a USB connector with 5 contacts, rated at 1A signal current. It features matte tin termination finish, gold over nickel mating contact finish, and polyethylene insulator material. Ideal for telecom & datacom applications requiring a durable, right-angle board mounting option with a surface mount termination type.
48037-1000
The Molex 48037-1000 USB connector features a body length of 0.472", insulation resistance of 1G ohm, and dielectric voltage of 500VAC. Ideal for telecom applications, this connector has a durable steel shell, surface mount termination, and is rated for 1500 cycles.
1747981-1
TE Connectivity's 1747981-1 is a Telecom & Datacom Connector with POLYETHYLENE insulator, COPPER ALLOY shell, and FEMALE contact gender. It has 19 contacts, rated for 0.5A signal current, and designed for surface mount termination in commercial applications.
48405-0003
Molex 48405-0003 USB connector has 9 contacts with tin finish, glass-filled polyethylene insulator, and nickel shell. Ideal for telecom/datacom applications, it features a right-angle mounting style on board with female contact gender and solder termination.
2301996-2
TE Connectivity's 2301996-2 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and nickel finish. It has 8 contacts for board mounting at temperatures from -40 to 85°C. Ideal for telecom and datacom applications requiring right-angle mounting with solder termination.
1734099-7
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: PHOSPHOR BRONZE; Insulator Material: LIQUID CRYSTAL POLYMER; Filter Feature: NO;
MUSB-C511-00
Amphenol
Amphenol MUSB-C511-00 USB connector with 1.201" body length, 500VAC dielectric voltage, and 105°C max temp. Ideal for telecom/datacom applications, featuring solder termination, 30u plating thickness, and UL94V-0 flammability rating.
1734577-4
TE Connectivity 1734577-4 is a Telecom & Datacom Connector with EMI shielding, gold flash termination, and glass-filled polyamide46 insulator. It has 8 contacts, rated for 1A signal current, and operates b/w -40 to 85°C. Ideal for telecom and datacom applications requiring durability and reliability in commercial settings.
215877-1
TE Connectivity's 215877-1 is a telecom and datacom connector with a body length of 0.598", insulation resistance of 500MΩ, and a body width of 0.453". It is commonly used in board mounting applications, offering durability with 750 cycles.
6-641337-3
TE Connectivity 6-641337-3 is a Telecom & Datacom Connector with 0.384" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for telecom applications, it features phosphor bronze contacts, clear insulator color, and durable design rated for 750 cycles.
67298-3090
The Molex 67298-3090 USB connector features a body size of 0.547" x 0.614" x 0.681", with glass-filled PBT insulator and tin plating. It has 8 contacts, right-angle mounting, solder termination, and is suitable for telecom/datacom applications. The connector is UL94V-0 rated, with a stainless steel shell and locking mounting option.
6339191-4
TE Connectivity 6339191-4 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and 8 contacts. It has a body length of 0.64", operates b/w -40 to 85°C, and features a right-angle mounting style. Ideal for telecom and datacom applications requiring high durability and reliability.
47151-1002
The Molex 47151-1002 is a telecom and datacom connector with a body length of 0.591", width of 0.243", and depth of 0.478". It has an insulation resistance of 10MΩ, dielectric voltage withstand of 300VAC, and a contact finish of Sn/Bi. This connector is commonly used in board mounting applications for telecommunications and data communication systems.
J0G-0001NL
Pulse Electronics
J0G-0001NL by Pulse Electronics is a Telecom & Datacom Connector with 0.7" body length, 0.445" width, and 0.95" depth. Featuring 8 contacts, POLYETHYLENE insulator, and Tin (Sn) termination finish for board mounting. Ideal for telecom and datacom applications requiring a polarized housing and right angle mounting style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved