Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Assembly Items;
Median Price
$0.464
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.535
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$0.540
$0.393
$0.334
$0.286
RS Americas
$0.592
Mouser Electronics
$0.620
$0.450
$0.323
$0.264
Master Electronics
$0.235
Verical
$0.288
Powell Electronics
$0.280
TTI
$0.320
$0.251
Gateway Technologies
$7.000
$6.230
Singapore Electronics
$7.700
$7.161
$6.853
$6.544
Assembly Products SP16M2N attributes and parameters. Explore more Assembly Products devices from Amphenol
Other Names:
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
ULN2803ADWR
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
EU2B-YS3303C
Idec
ROTARY SWITCH;
Hy Electronic
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Microsemi
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3203C
39-00-0049
Molex
Molex 39-00-0049 contact features brass material, square pin-socket design, and crimp terminal type. Ideal for 5559, 30068, 42475 series housing applications with wire sizes ranging from 28 AWG to 22 AWG. Offers straight mounting style and 0.071 inch max cable entry for secure connections.
39-00-0060
Molex 39-00-0060 CONTACT features CRIMP terminal type, 0.051" min cable entry, and PHOSPHOR BRONZE material. Ideal for 5557, 30067, 42474, 44516 SERIES HOUSING applications with FEMALE contact gender and SQUARE PIN-SOCKET design.
5748676-3
TE Connectivity
TE Connectivity 5748676-3 is a backshell assembly product with 3 shell sizes, shielding, and zinc alloy material. It supports plug/receptacle usage with min cable entry of 0.255" and max operating temperature of 105°C. Ideal for applications requiring secure mounting using #4-40 screws and accommodating up to 0 AWG wire size.
1-2308272-7
TE Connectivity's 1-2308272-7 cable clamp features shell sizes of 5, zinc alloy material, and screw mounting option. With shielding and a min cable entry of 0.256", it supports cables up to 0 AWG. Ideal for applications requiring secure cable management in environments with temperatures ranging from -40°C to 90°C.
1-583616-0
TE Connectivity 1-583616-0 CONTACT features CRIMP terminals for wire sizes 28-24 AWG, rated at 5A current. Suitable for POWER AND SIGNAL applications with operating temperatures from -40 to 85°C. Ideal for assemblies requiring FEMALE contacts with 0.24 mm2 cross-section area.
643075-2
TE Connectivity 643075-2, an Assembly Product with UL approval, features MTA-100 connector usage. With a temp range of -40 to 85°C, it supports up to 0 AWG wire size. Made of polyamide, it is ideal for various electrical assembly applications.
5748677-1
TE Connectivity 5748677-1 is a shielded backshell with polyethylene material. It supports plug/receptacle usage, #4-40 and screw mounting options, and accommodates cables up to 0.32 inch. Operating temperature ranges from -55 to 85 °C, suitable for various assembly applications.
13711546
Aptiv
Aptiv 13711546 CONTACT is a FEMALE CRIMP terminal for FLRY-B cables. Made of COPPER ALLOY, it accepts cable entries from 0.0472" to 0.063". Ideal for automotive wiring harness assembly due to its precise fit and durable material.
50125-8000
The Molex 50125-8000 is a male contact assembly product with crimp terminal type. It is designed for use with the 51047 series housing, featuring a finish thickness of 35 and chain contact design. Ideal for wire sizes ranging from 28 to 26 AWG, it offers a straight mounting style and is made of phosphor bronze material.
WM-2P
The TE Connectivity WM-2P is an assembly product designed for DTM SERIES applications. With a temperature range of -55 to 125°C, it accommodates wires up to 0 AWG. Made of polybutylene terephthalate, it's ideal for power and signal connections in various industries.
AT60-202-20141
Amphenol
CONNECTOR ACCESSORY;
BXH-001T-P0.6
J S T Mfg
BXH-001T-P0.6 by J S T Mfg is a CRIMP terminal with approvals from TUV and UL, rated for 250V AC/DC and 3A current. It has a max operating temperature of 85°C and min of -25°C, suitable for applications requiring FEMALE contacts with 22 AWG wire size in STRAIGHT mounting style with LOCKING option.
770904-1
TE Connectivity's 770904-1 is a plug housing with stranded construction and crimp terminal type. It has a rated voltage of 600V and can handle temperatures from -55 to 105 °C. This power contact, made of brass, is suitable for discrete wire applications with cable entry ranging from 0.059 to 0.094 inch.
08-70-0043
Molex 08-70-0043 is a CRIMP male CONTACT with STRAIGHT mounting style. Features RND PIN-SKT contact style made of BRASS. Ideal for assembly products requiring reliable electrical connections in various applications.
1-1469491-2
CONNECTOR ACCESSORY; Assembly Item Name: GUIDE PIN; Material: ZINC ALLOY; IEC Conformity: NO; Mounting Style: STRAIGHT; Wire Gauge (AWG): 0;
43375-0001
Molex 43375-0001 CONTACT features CRIMP terminal type, rated for 1000V AC/DC, with 18A current. Ideal for applications requiring FEMALE contact gender, STRAIGHT mounting style, and BRASS material construction.
M23053/16-003-0
Dunbar Products
ASSEMBLY ITEMS; IEC Conformity: NO; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; Construction: SINGLE WALL; DIN Conformity: NO; MIL Conformity: NO;
M23053/5-106-9
3m Electronic Products Division
ASSEMBLY ITEMS; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE; IEC Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN; MIL Conformity: NO;
9019190000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Minimum Wire Size: 12 AWG; Assembly Item Name: FERRULE; DIN Conformity: NO; Approvals (V): CSA; GOST; UL; VDE;
0460-202-20141
TE Connectivity's 0460-202-20141 contact features crimp terminal type, machined contact design, and 20 AWG wire gauge. Ideal for power applications with a rated current of 7.5A, operating b/w -55°C to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved