Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Amphenol SLPPB35BSB is a circular connector with SNAP coupling, suitable for temperatures ranging from -40°C to 125°C. Featuring a solid backshell and crimp termination, it is designed for environment-resistant applications requiring male contact gender. The connector has a body depth of 1.142 inches and meets UL standards, making it ideal for cable mounting in various industries.
Median Price
$22.490
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$19.336
100+ parts
$15.133
1k+ parts
-
10k+ parts
Mouser Electronics
$21.390
$16.240
$15.650
TTI
$21.580
$18.950
Chip1Stop
$23.400
$12.700
Newark
$23.570
$17.840
DigiKey
$24.410
$17.639
$15.747
TTI Europe
$24.674
$18.798
$17.421
Farnell
$29.820
$25.520
Element14
$38.480
$32.330
$30.830
Distrelec
Arrow
$14.450
$13.270
Verical
$13.550
Master Electronics
$15.220
$14.020
Nova Conductors
$18.870
Electro Sonic
$25.300
$19.950
$19.110
Vyrian
IBS Electronics
$21.460
$19.768
Rutronik
Aztec Data Supply Inc.
$3.520
Corohmni
$4.245
Advanced Electronics
$10.857
$10.314
Ampacity Inc.
$13.460
Semicontronic
$13.124
$13.056
Bastille Electronics
$17.926
$16.794
Gateway Technologies
Singapore Electronics
$20.757
$19.304
$18.473
$17.643
Continental Prestige Electronics
$27.100
$20.540
Argo Parts USA
The compact body depth allows for easy installation in tight spaces, making this product versatile and suitable for various applications.
The snap coupling type ensures quick and secure connections, enhancing the convenience and reliability of the product.
With a high maximum operating temperature, this product can withstand extensive use in demanding environments without experiencing performance issues.
The low minimum operating temperature makes this product suitable for use in cold climates or environments where temperatures can fluctuate significantly.
The circular connector type allows for a secure and stable connection, making this product ideal for applications where reliable connectivity is essential.
Compliance with the UL standard ensures that this product meets high safety and quality requirements, giving users peace of mind when using it.
The solid backshell type provides additional protection and durability to the product, making it suitable for use in harsh or rugged environments.
The environment-resistant design of this product allows it to withstand various weather conditions, chemicals, and other environmental factors, increasing its durability and reliability.
The cable mounting type simplifies the installation process and allows for flexible placement, making this product easy to integrate into different systems.
The crimp termination type facilitates quick and secure wire connections, ensuring a stable and reliable electrical connection for the product.
With male contact gender, this product is compatible with various female connectors, providing versatility and interoperability in different systems.
The plug body or shell style offers a simple and efficient way to connect and disconnect the product, making it user-friendly and convenient for maintenance and servicing.
Other Function Circular Connectors SLPPB35BSB attributes and parameters. Explore more Other Function Circular Connectors devices from Amphenol
Backshell Type:
Body Depth:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
Empty Shell:
Environmental Characteristics:
Filter Feature:
Mating Info.:
Mixed Contacts:
Mounting Type:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Reference Standard:
Termination Type:
Total No. of Contacts:
SLPPB35BSB Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.20
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semitron
FDLL4148
National Semiconductor
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
General Semiconductor
Panjit International
FFA.2S.304.CLAC62Z
Lemo Usa
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1589061-3
TE Connectivity
TE Connectivity 1589061-3 is a SNAP circular connector with 19 contacts, suitable for applications requiring a temperature range of -55 to 200°C. Featuring an aluminum alloy shell and nickel finish, it is designed as a receptacle with female contact gender for panel mounting using 30 AWG wire. Ideal for mains connectors rated at 115/230VAC.
UTG6128PN
Souriau-sunbank Connection Technologies
UTG6128PN by Souriau-sunbank features 8 contacts, bayonet coupling, and glass-filled polyethylene insulator. Ideal for cable mounting applications, this circular connector with solid backshell is a male plug shell size 12.
HDP24-24-47PE-L017
TE Connectivity's HDP24-24-47PE-L017 is a circular connector with 47 contacts, rated at 250V and 13A. Featuring GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for applications requiring a male receptacle connector with solid backshell, UL certification, and polarization key.
1838275-3
TE Connectivity 1838275-3 is a circular connector with GLASS FILLED POLYAMIDE66 insulator. It has 3 contacts, rated at 5A for signal current. Operating temperature ranges from -40 to 85 °C, making it suitable for various applications requiring reliable connections in challenging environments.
T4041017041-000
TE Connectivity's T4041017041-000 Circular Connector has a max operating temp of 85°C and -40°C min, with 4 contacts and 3A signal current rating. It features a brass shell, nickel finish, and polarization key for applications requiring reliable female receptacle connections.
1553006
Phoenix Contact
Phoenix Contact 1553006 is a threaded circular connector with gold termination finish. Featuring 4 contacts, it is ideal for board and panel mounting applications. This female socket connector has solid backshell and solder termination, ensuring reliable performance in various industrial settings.
SJS830100
Amphenol
The Amphenol SJS830100 is a circular connector with 8 female contacts, bayonet coupling, and polyamide66 insulator. It features a solid backshell, plug body style, and shell size 7. Ideal for cable mounting applications requiring a reliable and secure connection.
SLPPB50BSB1EH
Amphenol SLPPB50BSB1EH is a circular connector with SNAP coupling, suitable for -40 to 125°C. Featuring solid backshell and male contact gender, it is ideal for cable mounting applications requiring environment resistance. Compliant with UL standards, this plug-type connector has a body depth of 1.142 inch.
C01630C00610012
CIRCULAR CONNECTOR; Maximum Operating Temperature (Cel): 125; Minimum Operating Temperature: -40 Cel;
044-103-10002
Amphenol 044-103-10002 is a circular connector with snap coupling, polyethylene insulator, and tin contact finish. It has 2 contacts, waterproof option, and solid backshell for cable mounting. Ideal for environment/fuel resistant applications requiring female crimp termination in plug body style.
ZRLM-28C28-42PR
ZRLM-28C28-42PR by Amphenol is a threaded circular connector with a body depth of 8.625 inches. It has a max operating temperature of 107°C and a min operating temperature of -55°C. This corrosion/moisture resistant connector is commonly used in cable mounting applications.
16282-2SG-311
Switchcraft
Switchcraft 16282-2SG-311 is a SNAP circular connector with POLYAMIDE insulator, suitable for temperatures from -40 to 115°C. Featuring 2 FEMALE contacts, it is CORROSION RESISTANT and UL/CSA certified. Ideal for CABLE mounting applications requiring reliable solder termination.
21038121405
Harting Electronics & Kg
The Harting Electronics & Kg 21038121405 is a threaded circular connector with 4 contacts, solid backshell, and male contact gender. It is used for cable mounting applications requiring crimp termination.
FFA.2S.304.CLAC42Z
XZCP0666L5
Schneider Electric Sa
CIRCULAR CONNECTOR; Contact Material: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
5830611-1
TE Connectivity 5830611-1 is a circular connector with rated voltage of 10kV, operating temperature range from -55 to 125°C. It features one female contact style, solid backshell, and supports up to 16 AWG wire size. Ideal for applications requiring high voltage and temperature resistance.
211102-1
The TE Connectivity 211102-1 is a threaded circular connector with a rated voltage of 600V and an operating temperature range from -55 to 105°C. It features a polarized design, polyethylene insulator, and UL flammability rating of 94V-0. Ideal for applications requiring reliable connections in harsh environments.
T4111401051-000
TE Connectivity's T4111401051-000 is a threaded circular connector with 5 contacts, rated for 60V and 4A. Made of polybutylene terephthalate, it operates b/w -40 to 85°C. Ideal for applications requiring durable male connectors with polarization key in plug shell style.
2101551-1
TE Connectivity's 2101551-1 is a SNAP circular connector with 40 contacts, COPPER ALLOY shell material, and polarization key. It operates b/w -55 to 125 °C, suitable for applications requiring a polarized male plug with RND PIN-SKT contact style at 115/230VAC mains rating.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SLPPA25BSB0
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Reference Standard: UL; Backshell Type: SOLID; Minimum Operating Temperature: -40 Cel;
SLPPA25BSB
The Amphenol SLPPA25BSB is a circular connector with SNAP coupling, suitable for temperatures ranging from -40 to 125°C. Featuring a solid backshell and environment-resistant design, it is ideal for cable mounting applications requiring male contact gender. Compliant with UL standards, this connector has a body depth of 0.89 inch.
SLPPA25BSB1
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Backshell Type: SOLID; Termination Contact Finish: NOT APPLICABLE;
SLPPA25BSB2
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Maximum Operating Temperature (Cel): 125; Environmental Characteristics: ENVIRONMENT RESISTANT;
SLPPA25BSB3
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Environmental Characteristics: ENVIRONMENT RESISTANT; Maximum Operating Temperature (Cel): 125; Reference Standard: UL;
SLPPA25BSB4
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Depth: .89 inch; Filter Feature: NO; Coupling Type: SNAP;
SLPPB35BSB1EH
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Contact Material: NOT SPECIFIED; Termination Type: CRIMP;
SLPPB35BSB1
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 1; Backshell Type: SOLID; Termination Contact Finish: NOT APPLICABLE;
SLPPB35BSB0EH
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Minimum Operating Temperature: -40 Cel; Body or Shell Style: PLUG; Body Depth: 1.142 inch;
SLPPB35BSB0
The Amphenol SLPPB35BSB0 circular connector features a body depth of 1.142", SNAP coupling type, and operating temperatures from -40°C to 125°C. Ideal for applications requiring an environment-resistant backshell, this male plug connector with crimp termination is UL standard compliant and suitable for cable mounting.
SLPPB35BSB2EH
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Termination Contact Finish: NOT APPLICABLE; Mounting Type: CABLE;
SLPPB35BSB3EH
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Body Depth: 1.142 inch; Filter Feature: NO;
SLPPB50BSB0EH
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Backshell Type: SOLID; Environmental Characteristics: ENVIRONMENT RESISTANT; Reference Standard: UL;
SLPPB35BSB4EH
The Amphenol SLPPB35BSB4EH circular connector features a body depth of 1.142", SNAP coupling type, and operating temperatures from -40°C to 125°C. Ideal for applications requiring an environment-resistant solid backshell, this UL-certified male plug connector is designed for cable mounting with crimp termination.
SLPPB35BSB4
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP; Minimum Operating Temperature: -40 Cel; Body Depth: 1.142 inch;
SLPPB50BSO0EH
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Coupling Type: SNAP; Termination Contact Finish: NOT APPLICABLE;
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Backshell Type: SOLID; Minimum Operating Temperature: -40 Cel;
SLPPA25BSR1
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Maximum Operating Temperature (Cel): 125;
SLPPA25BSR3
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Environmental Characteristics: ENVIRONMENT RESISTANT; Mating Contact Finish: NOT SPECIFIED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
SLPPB35BNB2
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Minimum Operating Temperature: -40 Cel; Contact Material: NOT SPECIFIED; Maximum Operating Temperature (Cel): 125;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved