Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CIRCULAR CONNECTOR;
Median Price
$30.123
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Farnell
1+ parts
$17.740
100+ parts
$16.010
1k+ parts
$15.900
10k+ parts
-
PEI Genesis
$18.070
$14.410
Verical
$21.239
Interstate Connecting
$23.745
Heilind Electronics
$25.766
Mouser Electronics
$34.480
$24.910
$24.590
DigiKey
$23.353
Newark
$35.980
$27.460
$26.610
Element14
$48.990
$35.400
$32.520
Powell Electronics
$63.540
$40.370
$35.970
Nova Conductors
Quittner & Schimek s.r.o.
Gateway Technologies
$3.000
$2.669
Singapore Electronics
$3.300
$3.068
$2.936
$2.804
Ampacity Inc.
$17.670
Argo Parts USA
Continental Prestige Electronics
Netroflash
Other Function Circular Connectors SJS861700 attributes and parameters. Explore more Other Function Circular Connectors devices from Amphenol
Connector Type:
SJS861700 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.20
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
Bytesonic Electronics
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
Goodwork Semiconductor
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
New Jersey Semiconductor Products
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
Meritek Electronics
Vicor
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
UTS6JC103P
Souriau
CIRCULAR CONNECTOR; Manufacturer Series: UTS;
T4061110003-001
TE Connectivity T4061110003-001 is a circular connector with EMI shielding and 3 contacts. It features a solid backshell, polarization key, and supports 115/230VAC mains connector rating. Ideal for applications requiring reliable connection in environments with electromagnetic interference.
03320008-1
Lumberg Connect
Lumberg Connect 03320008-1 is a circular connector with GLASS FILLED POLYAMIDE insulator, COPPER ZINC contacts, and NICKEL shell finish. It has 8 contacts, rated for 5A signal current, and operates b/w -40 to 85°C. Ideal for commercial applications requiring DIN conformance and UL reference standard compliance.
HDP26-24-9SN
TE Connectivity's HDP26-24-9SN is a circular connector with 9 contacts, rated at 250V and 100A. Made of glass-filled polyamide, it operates b/w -55°C to 125°C. Ideal for applications requiring a polarized female plug with solid backshell, suitable for cables in need of strain relief.
1300061675
Molex
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
SR30-10PG-6P
Hirose Electric
The Hirose Electric SR30-10PG-6P is a threaded circular connector with 6 contacts, solid backshell, and brass/zinc alloy shell. It features chromium and nickel plating, solder termination, and male contact gender. Ideal for cable mounting applications in various industries requiring reliable connectivity.
7000-12701-0000000
Murrelektronik
The Murrelektronik 7000-12701-0000000 is a threaded circular connector with plastic insulator material. It features 4 contacts, solid backshell type, and male contact gender. Ideal for cable mounting applications in various industries requiring reliable connectivity.
C01630F00610012
Amphenol
Amphenol C01630F00610012 circular connector has insulation resistance of 100MΩ, operating temp range -40 to 125°C, and rated current of 10A. Ideal for commercial applications requiring durable connectors with female contacts, solder lug termination, and DIN conformance.
120-1804-000
Itt Cannon
ITT Cannon's 120-1804-000 circular connector features SNAP coupling, COPPER ALLOY contacts with SILVER finish, and ELASTOMERIC shell material. With 2 contacts, it is ideal for cable mounting applications requiring male and female connectors in a receptacle body style.
801-007-16NF5-3SA
Glenair
The Glenair 801-007-16NF5-3SA is a circular connector with gold termination contact finish, threaded coupling type, and beryllium copper contact material. It has 3 contacts and features a cadmium with chromate plated shell. Ideal for cable mounting applications requiring reliable female connectors in an aluminum alloy shell.
1424177
Phoenix Contact
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: GOLD; JESD-609 Code: e4; Mating Contact Finish: NOT SPECIFIED;
T4071017041-001
TE Connectivity's T4071017041-001 Circular Connector has a max operating temp of 85°C and -40°C min. It features 4 contacts, rated at 3A for signal current. With a brass shell and nickel finish, it is ideal for cable mounting applications requiring a polarized female connector.
HR10-7P-4S(73)
HR10-7P-4S(73) by Hirose Electric is a circular connector with 4 gold-plated contacts, SNAP coupling type, and nickel-plated shell. Ideal for cable mounting applications in industries requiring reliable female connectors. Made of zinc alloy and brass with a solid backshell design, suitable for plug-style connections in size 7 shells.
T4133412041-000
TE Connectivity's T4133412041-000 circular connector has a rated voltage of 250V and can operate b/w -40 to 85°C. With a total of 4 contacts, it is designed for applications requiring a max current of 4A. The connector features a brass shell with nickel finish, ideal for use in polarized connections at high temperatures.
1-2823445-5
TE Connectivity 1-2823445-5 is a circular connector with EMI shielding, rated for 50V and 70°C. Featuring nickel finish, it has 4 male contacts suitable for cable mounting applications.
1424139
CIRCULAR CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
C01620H00310012
Amphenol C01620H00310012 is a threaded circular connector with 4 silver contacts. It features polyamide66/6 shell material, screw termination, and solid backshell type. Ideal for cable mounting applications requiring reliable male contact gender connectivity.
BU-12PMMS-LC7001
EGG.1B.304.CLL
Lemo Usa
EGG.1B.304.CLL by Lemo Usa is a circular connector with 0.55" body diameter and 0.36" depth, featuring PEEK insulator material and chrome plated shell finish. It has 4 contacts, operates b/w -55°C to 250°C, and is corrosion/moisture resistant. Ideal for cable and panel mounting applications requiring solder termination with female contact gender.
1589061-3
TE Connectivity 1589061-3 is a SNAP circular connector with 19 contacts, suitable for applications requiring a temperature range of -55 to 200°C. Featuring an aluminum alloy shell and nickel finish, it is designed as a receptacle with female contact gender for panel mounting using 30 AWG wire. Ideal for mains connectors rated at 115/230VAC.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SJS830100P
SJS830100
The Amphenol SJS830100 is a circular connector with 8 female contacts, bayonet coupling, and polyamide66 insulator. It features a solid backshell, plug body style, and shell size 7. Ideal for cable mounting applications requiring a reliable and secure connection.
SJS830200
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Shell Size: 7; Total No. of Contacts: 8;
SJS830200P
SJS820200
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
SJS830230
Other Circular Connectors; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: BAYONET; Shell Size: 5; Termination Type: CRIMP;
SJS830210P
SJS840400P
SJS830210
Other Circular Connectors; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Total No. of Contacts: 3; DIN Conformance: NO;
SJS862300
CIRCULAR CONNECTOR; Manufacturer Series: SJS862300;
SJS830270
CIRCULAR CONNECTOR; Manufacturer Series: SJS830270;
SJS860910
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: SJS860900; IEC Conformity: NO; Empty Shell: YES;
SJS840310
CIRCULAR CONNECTOR; Manufacturer Series: SJS840310;
SJS830101P
SJS861400P
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
SJS861700P
SJS861800P
SJS861100
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
SJS861200
SJS861400
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved