Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Option-1: LOCKING;
Median Price
$32.840
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
< 1k
Newark
1+ parts
$22.870
100+ parts
1k+ parts
-
10k+ parts
DigiKey
$24.696
Farnell
$34.220
$21.760
Element14
$55.230
$43.300
$40.910
Verical
$28.688
Gateway Technologies
$4.000
$3.560
Singapore Electronics
$4.400
$4.092
$3.916
$3.740
Headers & Edge Type Connectors RVPX-J16EC1 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Amphenol
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Insulator Material:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
RVPX-J16EC1 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
MMBT2222ALT1G
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
International Semiconductor
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
Daco Semiconductor
SPC TECHNOLOGY/ MULTICOMP
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
1761606-3
TE Connectivity
TE Connectivity's 1761606-3 is a board connector with 10 contacts, 2 rows, and a mating contact pitch of 0.1". It features a body length of 0.8", insulation resistance of 5G ohm, and operates b/w -65°C to 105°C. Ideal for commercial applications requiring reliable signal connections on PCBs.
66506-358LF
Amphenol Communications Solutions
Amphenol's 66506-358LF is a 20-contact, 2-row board connector with UL 94V-0 flammability rating. Featuring a terminal pitch of 2.54mm, it is solder terminated and male gendered. Ideal for applications requiring straight mounting style in headers & edge type connectors.
929665-04-36-I
3m Electronic Products Division
929665-04-36-I by 3M Electronic Products Division is a board connector with 72 contacts, rated at 2.5A signal current. It features gold over nickel termination finish, glass-filled polyester insulator material, and operates b/w -40 to 105°C. Ideal for commercial applications requiring high insulation resistance and dielectric voltage withstand capabilities.
2-640456-6
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: POLARIZED; Termination Type: SOLDER; Mating Contact Finish: TIN;
640250-5
TE Connectivity 640250-5 is a board connector with 0.156" mating contact pitch, 100000000 ohm insulation resistance, and -55 to 105 °C operating temperature range. It has 5 contacts for cable mounting applications, featuring female crimp terminals and glass-filled polyamide insulator material.
M50-3500542
Harwin Plc
The Harwin PLC M50-3500542 is a 10-contact male board connector with 0.05" mating contact pitch and 1A signal current rating. Featuring a durable design for 300 cycles, it is ideal for commercial applications requiring a reliable connection in temperatures ranging from -40 to 105°C.
1-102387-1
TE Connectivity 1-102387-1 is a 2-row board connector with 60 contacts, rated at 3A signal current. Featuring a mating contact pitch of 0.1", it has a body length of 3.1" and operates b/w -65°C to 105°C. Ideal for commercial applications requiring reliable female connectors with crimp termination in black polyethylene insulator material.
DF13-8S-1.25C
Hirose Electric
DF13-8S-1.25C by Hirose Electric is a 8-contact board connector with 0.049" pitch, rated at 1A signal current. It features polyamide insulation, withstands up to 500VAC, and operates b/w -35°C to 85°C. Ideal for commercial applications requiring durable crimp termination in cable mounting setups.
B3B-XH-A-BK(LF)(SN)
J S T Mfg
B3B-XH-A-BK(LF)(SN) by J S T Mfg is a 3A BOARD CONNECTOR with 0.098" pitch, POLYAMIDE66 insulator, and 1000VAC dielectric voltage. Ideal for applications requiring a polarized housing, such as PCB connections in electronics with operating temperatures from -25 to 85°C.
22-12-2061
Molex
The Molex 22-12-2061 is a board connector with mating contact pitch of 0.1", insulation resistance of 50G ohm, and dielectric voltage rating of 1500VAC. It is used in applications requiring a durable, right-angle mounting style for commercial reliability.
76384-302LF
76384-302LF by Amphenol is a board connector with 0.1" contact pitch, suitable for commercial applications. It features matte tin over nickel termination finish, gold mating contacts, and glass-filled polyethylene insulator material. With a rated current of 3A and operating temperature range from -40 to 125°C, it offers reliable connectivity in various electronic devices.
DF40C-80DP-0.4V(51)
DF40C-80DP-0.4V(51) by Hirose Electric is a 2-row, 80-contact board stacking connector with gold-plated phosphor bronze contacts. Featuring a mating contact pitch of 0.016", it offers high insulation resistance of 50M ohm and withstands up to 100VAC. Ideal for PCB applications requiring reliable signal transmission in commercial environments at temperatures ranging from -35°C to 85°C.
87832-1420
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
43650-0212
The Molex 43650-0212 is a board connector with 0.118" mating contact pitch, GLASS FILLED LIQUID CRYSTAL POLYMER insulator, and 100u plating thickness. Ideal for applications requiring a durable male connector with 5A signal current rating, operating b/w -40 to 105°C in commercial settings.
51021-1100
The Molex 51021-1100 is a board connector with 11 contacts, 0.049" pitch, and 0.61" body length. It has an insulation resistance of 100M ohm, operates b/w -40 to 85°C, and uses crimp termination. Ideal for commercial applications requiring reliable female connectors with locking mounting option.
SHR-07V-S-B
SHR-07V-S-B by J S T Mfg is a 1-row loaded board connector with 7 contacts. It has a UL flammability code of 94V-0 and uses crimp termination. This connector is commonly used in cable mounting applications.
102694-3
TE Connectivity 102694-3 is a 2-row board connector with 10 contacts, rated at 3A for signal current. Featuring tin/lead termination, it has a mating contact pitch of 0.1" and operates b/w -65 to +105°C. Ideal for cable mounting applications requiring reliable female connectors with bellowed contact style.
5103309-1
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 10; Mixed Contacts: NO; UL Flammability Code: 94V-0;
PHR-6-Y
PHR-6-Y by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.079" pitch, 2A signal current rating, and POLYAMIDE66 insulator. It has a dielectric voltage of 800VAC, operates b/w -25 to 85°C, and features FEMALE SQ PIN-SKT contacts for CABLE mounting applications.
53261-0471
Molex 53261-0471 is a 4-contact board connector with a mating contact pitch of 0.049 inches. It has a surface mount termination type and is suitable for commercial applications. The connector has a durability of 30 cycles and can operate in temperatures ranging from -40 to 105°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved