Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Gateway Technologies
1+ parts
$8.000
100+ parts
1k+ parts
$7.120
10k+ parts
Singapore Electronics
$8.800
$8.184
$7.832
$7.480
Telecom & Datacom Connectors RJE58-188-5101 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Dielectric Withstanding Voltage (V):
Insulation Resistance:
Insulator Material:
JESD-609 Code:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
RJE58-188-5101 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Thinking Electronic Industrial
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
Diodes Incorporated
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
RC0402FR-0710KL
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
Db Lectro
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
6-569530-2
Commscope
6-569530-2 by Commscope is a Telecom & Datacom Connector with Glass Filled Polycarbonate insulator, Nickel shell finish, and Copper Alloy shell material. It has 8 contacts and is a male plug type connector suitable for cable mounting applications.
RJHSE-5080-02
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Body Width: .52 inch; Plating Thickness (inch): 50u; Filter Feature: NO;
1-406541-1
TE Connectivity
TE Connectivity 1-406541-1 is a Telecom & Datacom Connector with EMI Shielding. It features Matte Tin finish, Polyethylene insulator, and Phosphor Bronze contacts. Ideal for telecom applications requiring high insulation resistance and durability in temperatures ranging from -40 to 85°C.
2086581051
Molex
Molex 2086581051 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator. Featuring 19 contacts, it has a body size of 0.59" x 0.244" x 0.478". Ideal for board and panel mounting applications, it offers a max operating temperature of 85°C and durability of 10k cycles.
54602-908LF
54602-908LF by Amphenol is a telecom & datacom connector with 0.602" body length, 500M ohm insulation resistance, and 1400VAC dielectric voltage. Ideal for board mounting in applications requiring a durable, right-angle female jack connector with solder termination and UL certification.
RJE01-660-01
Amphenol
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
RJHSE-5080-A1
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
MUSBR-4193-M0
MUSBR-4193-M0 by Amphenol is a USB connector with 4+4 contacts, rated at 1.8A signal current. It features high temp thermoplastic insulation, zinc alloy shell material, and operates b/w -40 to 105°C. Ideal for telecom & datacom applications requiring durable, polarized connectors with UL certification.
2120892-1
TE Connectivity 2120892-1 is a EMI shielded telecom connector with 0.69" body depth and polyethylene insulator. It operates b/w -40 to 85°C, suitable for telecom and datacom applications requiring up to 8 contacts.
67490-3220
The Molex 67490-3220 is a Telecom & Datacom Connector with Tin finish contacts and Glass Filled Polyethylene insulator. Featuring 7 contacts, it is a male plug connector for surface mount applications on boards. UL Flammability Code: 94V-0 ensures safety in various electronic devices.
43202-8919
Molex 43202-8919 is a telecom & datacom connector with 0.624" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board and panel mounting in telecom applications due to its durability, UL certification, and female contact gender. Operating temperature range from -40°C to 70°C makes it suitable for commercial use.
2174507-2
TE Connectivity's 2174507-2 USB Connector features Polyethylene insulator, Tin shell finish, and 29.52u plating thickness. Ideal for telecom/datacom applications with board mounting option, surface mount termination, and 1.8A signal current rating.
ARF6-16-S-D-A-K-TR
Samtec
The Samtec ARF6-16-S-D-A-K-TR is a telecom & datacom connector with 16 contacts, featuring matte tin over nickel finish. With liquid crystal polymer insulator and copper alloy shell, it has a terminal pitch of 0.635mm and operates b/w -40 to 125°C. Ideal for surface mount applications in telecommunications and data communication systems.
104004-0501
The Molex 104004-0501 is a Telecom & Datacom Connector with TIN over Nickel finish. Featuring 5 contacts, it offers durability of 5000 cycles and solder termination. Ideal for telecom and datacom applications, this male plug connector has a straight mounting style and USB contact pattern.
5569380-1
TE Connectivity 5569380-1 is a Telecom & Datacom Connector with EMI shielding. It has Insulation Resistance of 500MΩ, rated for 1.5A signal current, and operates b/w -40 to 85°C. Ideal for telecom and datacom applications requiring durable connectors with right-angle mounting options.
47659-1102
Molex 47659-1102 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator, Nickel shell finish, and Brass shell material. It has 19 contacts for surface mount termination on board. Ideal for telecom and datacom applications requiring female contact gender in straight mounting style.
UJ31-CH-G1-SMT-TR
Cui Devices
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE; Body Width: .135 inch;
67068-9000
Molex 67068-9000 USB connector with 4 contacts, rated at 1.5A signal current, features glass-filled polyester insulation and solderable retention clips for board mounting. With a dielectric voltage of 750VAC, it is ideal for telecom & datacom applications requiring durable connectors with right-angle mounting style and polarized housing key.
57-10500-7
Cinch Connectivity Solutions
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Contact Design: PREASSEM CONN; Insulation Resistance: 1000000000 ohm;
2301994-6
TE Connectivity's 2301994-6 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, right-angle mounting style for board lock option. Ideal for applications requiring high operating temperatures and UL flammability code compliance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved