Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Contact Material: PHOSPHOR BRONZE; Mating Contact Finish: GOLD (6) OVER NICKEL (50); Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
Median Price
$1.090
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Future Electronics
1+ parts
$0.735
100+ parts
$0.710
1k+ parts
$0.675
10k+ parts
$0.645
Arrow
$1.038
$0.868
$0.751
-
Interstate Connecting
$1.077
$0.843
Verical
$0.940
Farnell
$0.858
$0.718
Mouser Electronics
$1.520
$1.110
$0.985
$0.851
DigiKey
$1.530
$1.103
$0.984
$0.850
Newark
$1.580
$1.230
$1.030
Element14
$2.060
$1.490
$1.280
$1.210
Master Electronics
$1.833
$1.083
$0.907
Chip1Stop
$0.569
Powell Electronics
$1.050
$0.910
$0.870
TTI
$1.100
$0.980
$0.840
TTI Europe
$0.770
$0.639
IBS Electronics
$1.685
$1.371
$1.160
Electro Sonic
$0.880
$0.761
$0.678
NAC Semi
$1.440
$1.330
Rapid Electronics
$1.332
TME
$1.366
$1.051
LWI Electronics Inc
Nova Conductors
ComSIT Distribution GmbH
Ampacity Inc.
$0.484
Continental Prestige Electronics
$1.130
$0.853
$0.792
Gateway Technologies
$7.000
$6.230
Singapore Electronics
$7.700
$7.161
$6.853
$6.544
Perfect Parts
Authorized Procurement Solutions
Abacus Technologies
Assy Fe
Netroflash
Eastek
Telecom & Datacom Connectors RJE08-188-0110 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
JESD-609 Code:
RJE08-188-0110 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
1N4148
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
RC0603FR-071KL
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
Sangdest Microelectronics (Nanjing)
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
48258-0001
Molex
The Molex 48258-0001 USB connector features a body length of 0.571", insulation resistance of 1000000000 ohm, and dielectric voltage of 500VAC. Ideal for telecom/datacom applications, it offers a solder holding flange for board mounting, with durability up to 1500 cycles.
5555162-1
TE Connectivity
TE Connectivity 5555162-1 is a Telecom & Datacom Connector with 0.7" body length, PBT-POLYESTER insulator, and 500M ohm insulation resistance. It features SPLIT BOARD LOCK mounting option for applications requiring 1.5A signal current, UL94V-0 flammability rating, and right angle mounting style.
DCP-USBNB-MNSC
Switchcraft
USB CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
UJ31-CH-31-SMT-TR
Cui
UJ31-CH-31-SMT-TR by Cui is a USB connector with 24 contacts, rated at 0.25A signal current. It features a right angle mounting style and polyamide9T insulator material. With a dielectric voltage of 100VAC, it's ideal for telecom & datacom applications requiring durability up to 10,000 cycles.
46765-0001
Molex 46765-0001 is a Telecom & Datacom Connector with 0.256" body length, 10000000 ohm insulation resistance, and 200VAC dielectric voltage. Ideal for board mounting applications in telecom and datacom systems due to its gold nickel termination finish, glass-filled LCP insulator, and male contact gender.
54601908WPLF
Amphenol Communications Solutions
Amphenol's 54601908WPLF is a Telecom & Datacom Connector with 0.6" body length, 500M ohm insulation resistance, and 1400VAC dielectric voltage. Ideal for board mounting in telecom applications, it features a matte tin over nickel finish, UL-rated durability of 250 cycles, and a right-angle mounting style.
67490-3220
The Molex 67490-3220 is a Telecom & Datacom Connector with Tin finish contacts and Glass Filled Polyethylene insulator. Featuring 7 contacts, it is a male plug connector for surface mount applications on boards. UL Flammability Code: 94V-0 ensures safety in various electronic devices.
1734346-1
TE Connectivity's 1734346-1 is a Telecom & Datacom Connector with body dimensions of 0.474" x 0.418" x 0.63". It features GLASS FILLED POLYAMIDE6T insulator, NICKEL finish, and 4 contacts. Ideal for board mounting applications with a rated current of 1A and durability of 1500 cycles.
RJHSE-5080-A1
TELECOM AND DATACOM CONNECTOR;
PX0844/B/0M50/A
Bulgin
USB CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
95501-6889
Molex 95501-6889 is a Telecom & Datacom Connector with 0.6" body length, 0.453" width, and 0.809" depth. Insulation resistance of 500M ohm, matte tin over nickel termination finish. Ideal for telecom and datacom applications due to its surface mount termination type and right angle mounting style.
1304
Hirose Electric
TELECOM AND DATACOM CONNECTOR; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: NO; Empty Shell: NO; Insulator Material: ACRYLONITRILE BUTADIENE STYRENE;
85505-5113
Molex 85505-5113 is a telecom & datacom connector with body dimensions of 0.653" x 0.512" x 0.74". It features insulation resistance of 500MOhm, matte tin over nickel termination contact finish, and phosphor bronze contact material. Ideal for board mounting applications in commercial settings with operating temperatures ranging from -40°C to 85°C.
08211X1T43-F
Bel Fuse
Bel Fuse 08211X1T43-F is a Telecom & Datacom Connector with Tin (Sn) termination, Polybutylene Terephthalate insulator, and Nickel shell finish. It has 8 contacts for board and panel mounting in right angle style. Ideal for applications requiring UL94V-0 flammability code compliance.
629105150921
Wuerth Elektronik & Kg
629105150921 by Wurth Elektronik is a USB connector with dimensions of 0.329" x 0.118" x 0.197". It has an insulation resistance of 1 Gohm, dielectric voltage of 100VAC, and operates b/w -40°C to 85°C. Ideal for telecom/datacom applications, it features a female contact gender, surface mount termination type, and matte tin shell finish.
55100-0670
Molex 55100-0670 is a Telecom & Datacom Connector with Insulation Resistance of 1G ohm, Dielectric Voltage of 350VAC, and Operating Temp range from -40 to 85°C. It has a polarized housing for UL-rated signal currents up to 2A. Ideal for commercial applications requiring reliable cable mounting with solder lug termination.
54819-0589
54819-0589 by Molex is a USB connector with a body length of 0.303", width of 0.155", and depth of 0.354". It is used in telecom and datacom applications, has gold termination contact finish, and can operate b/w -20°C to 85°C.
5520425-3
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: TOP ENTRY; Termination Type: SOLDER; Manufacturer Series: 5520425;
RJHSE-5080-A8
57-10500-7
Amphenol
Amphenol 57-10500-7 is a Telecom & Datacom Connector with Gold (Au) - Nickel (Ni) finish, DIALLYL PHTHALATE insulator, and ZINC shell. Featuring 50 contacts, it is a male plug connector for cable mounting with UL94V-0 flammability rating. Ideal for telecom and datacom applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RJE01-660-01
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
RJE09-288-1410
RJE05-1AA-1310
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; JESD-609 Code: e3; Mating Contact Finish: GOLD (30);
RJE06-188-1120
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Contact Style: TELCOM, MODULAR;
RJE08-188-0110
RJE05-166-0110
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Mounting Type: BOARD AND PANEL; Insulator Material: POLYETHYLENE;
RJE08-188-0210
TELECOM AND DATACOM CONNECTOR; JESD-609 Code: e3; Mating Contact Finish: GOLD (15) OVER NICKEL (50); Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Contact Material: PHOSPHOR BRONZE;
RJE08-188-0310
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: GOLD (30) OVER NICKEL (50); Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Contact Material: PHOSPHOR BRONZE; JESD-609 Code: e3;
RJE08-188-0410
TELECOM AND DATACOM CONNECTOR; JESD-609 Code: e3; Mating Contact Finish: GOLD (50) OVER NICKEL (50); Contact Material: PHOSPHOR BRONZE; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved