Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
POTENTIOMETER; Mounting Type: PCB MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 90 Cel; Tolerance: 20 %;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Gateway Technologies
1+ parts
$0.010
100+ parts
1k+ parts
$0.008
10k+ parts
Singapore Electronics
$0.011
$0.009
Variable Resistors PTC15LV02-104B2020 attributes and parameters. Explore more Variable Resistors devices from Amphenol
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Technology:
Terminal Shape:
Tolerance:
Operating Voltage:
PTC15LV02-104B2020 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99WT1G
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
Lite-on Semiconductor
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
Taiwan Semiconductor
Bytesonic Electronics
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
3306K-1-503
Bourns
Bourns 3306K-1-503 is a CERMET trimmer resistor with 50k ohm resistance, 25% tolerance, and 0.2W power dissipation. It operates b/w -25°C to 100°C, suitable for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package. The linear law of resistance and screw actuator make it ideal for fine-tuning circuits with a wide operating voltage range up to 100V.
RV4NAYSD102A
Nte Electronics
POTENTIOMETER; Mounting Type: CHASSIS MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 120 Cel; Tolerance: 10 %;
PS45M-1MD2LR20K
Tt Electronics Plc
PS45M-1MD2LR20K by Tt Electronics Plc is a linear potentiometer with 20000 ohm resistance, 20% tolerance, and 0.125 W power dissipation. Ideal for applications requiring precise voltage control in PCB-mounted devices due to its slide actuator type and through-hole mounting.
3296Y-1-201LF
Bourns 3296Y-1-201LF is a 200 ohm, 25-turn linear trimmer resistor with CERMET technology. Operating voltage of 300V, rated power dissipation of 0.5W, and temperature coefficient of 100 ppm/°C make it ideal for precision applications in electronics. With through-hole mounting and vertical actuator orientation, it ensures reliable performance in various circuits.
TC33B-1-503E
Bourns TC33B-1-503E is a linear trimmer pot with 50000 ohm resistance, 25% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronic circuits requiring precise resistance adjustments within -40 to 100 °C temperature range.
3306F-1-102
Bourns 3306F-1-102 is a linear trimmer resistor with 1000 ohm resistance, 25% tolerance, and 0.2 W power dissipation. It operates b/w -25 to 100 °C and has a temperature coefficient of 250 ppm/°C. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
RRS1K0E
Ohmite Manufacturing
Ohmite Manufacturing's RRS1K0E is a 1000 ohm POTENTIOMETER with LINEAR resistance law, WIRE WOUND technology, and 10% tolerance. It features a 500W power dissipation rating, 325° rotation angle, and PANEL MOUNT package style. Ideal for precise control applications in various electronic circuits.
3314J-2-103E
Bourns 3314J-2-103E is a CERMET trimmer resistor with 10000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. It operates b/w -55 to 125 °C and has a linear law of resistance. Ideal for applications requiring precise voltage adjustments in compact SMT designs.
RS3011114A02
Alps Electric
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %; Orientation (Actuator): VERTICAL;
PV32H500A01B00
Murata Manufacturing
Murata Manufacturing's PV32H500A01B00 is a CERMET variable resistor with 50 ohm resistance, 20% tolerance, and 0.5 W power dissipation. It is used in PCB mounting applications for temperature compensation circuits due to its linear resistance law and wide operating temperature range (-55 to 125 °C).
PT10LV10-104A2020-PM-S
Piher Sensors And Controls Sa
PT10LV10-104A2020-PM-S by Piher Sensors is a 100k ohm linear potentiometer with 20% tolerance. It operates b/w -25°C to 70°C, making it suitable for various temperature environments. The vertical orientation and through-hole mounting type make it ideal for precise resistance adjustments in electronic circuits.
3214W-1-204E
Bourns 3214W-1-204E is a linear trimmer pot with 200k ohm resistance, suitable for applications requiring precise resistance adjustments. With 5 turns and CERMET technology, it offers high accuracy and stability. Operating b/w -65 to 150 °C, it's ideal for circuits demanding a wide temperature range.
67WR500LFTB
67WR500LFTB by Tt Electronics Plc is a CERMET variable resistor with 20 turns, linear resistance law, and 85°C rated temperature. It is used in PCB mount applications for adjusting voltage with a tolerance of 10% and max operating temperature of 125°C.
89PHR10KLF
89PHR10KLF by Tt Electronics Plc is a linear trimmer resistor with 10000 ohm resistance, rated for 0.75 W power dissipation and 10% tolerance. It features CERMET technology, operates b/w -55 to 125 °C, and has a max voltage of 200 V. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
249BBHS0XB25103KA
Vishay Intertechnology
Vishay Intertechnology's 249BBHS0XB25103KA is a CERMET POTENTIOMETER with 10000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. Ideal for PCB mount applications, it operates b/w -55 to 125 °C with a max voltage of 70.7 V and offers a rotation angle of 265°.
RK2711120026
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %;
RK1631210AX9
Alps Alpine
Alps Alpine RK1631210AX9 is a 10000 ohm linear potentiometer with 6 terminals. It has a 300° rotation angle, operates at 5V voltage, and offers a tolerance of 20%. Ideal for applications requiring precise resistance adjustment in PCB mount setups.
PTB6053-2010APB103
The Bourns PTB6053-2010APB103 is a linear carbon potentiometer with 10000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. It features a vertical actuator orientation, slide type actuator, and through hole mount for PCB applications. Ideal for precise voltage control in electronic circuits with operating temperatures ranging from -10 to 60 °C.
PTL60-15G1-103B2
Bourns PTL60-15G1-103B2 is a linear carbon potentiometer with 10000 ohm resistance, 20% tolerance, and 0.1 W power dissipation. It has a rectangular package for PCB mount applications. Operating temperature range from -10 to 55 °C makes it suitable for various electronic devices.
3683S-1-104L
Bourns 3683S-1-104L is a linear potentiometer with 100k ohm resistance, 3% tolerance, and 2W power dissipation. Ideal for panel mount applications in temperature-sensitive environments due to its -25 to 85 °C operating range and low temp coef of 100 ppm/°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Amphenol
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved