Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol's M39012/55-4007 SSMA Connector features 0.11 dB insertion loss, threaded coupling, and PTFE insulator. Ideal for RF applications up to 12.4 GHz, with 50 ohm impedance and male plug design for cable mounting using clamp solder termination.
Median Price
$84.360
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Verical
1+ parts
$73.079
100+ parts
-
1k+ parts
10k+ parts
TTI
$95.640
$79.700
BTC Electronics
DF Sales Co.
$28.000
Nova Conductors
$63.300
Microwave Components, LLC
Vyrian
FDH Electronics
EMSNET
American Connector Supply Corp
Q Components
Electronics Depot
Electronic Expediters
Corel Iberica Componentes, S.L.
R&J Components
Sunrise Surplus Inc.
Elcom Components
Corohmni
$3.770
Aztec Data Supply Inc.
$6.004
Ampacity Inc.
$30.000
Gateway Technologies
$56.336
Continental Prestige Electronics
$62.034
Singapore Electronics
$69.629
$64.754
$61.969
$59.184
Argo Parts USA
Assy Fe
Low insertion loss ensures minimal signal loss and maintains the integrity of the signal during transmission, making this connector ideal for high frequency applications.
MIL conformity ensures that the connector meets stringent military specifications for quality and reliability, making it suitable for demanding environments and applications where durability is essential.
Threaded coupling provides a secure and stable connection, preventing accidental disconnection and ensuring reliable performance in high vibration environments.
Polytetrafluoroethylene insulator offers excellent electrical properties, high temperature resistance, and chemical inertness, making the connector suitable for a wide range of applications in challenging conditions.
RF SMA connectors are widely used in telecommunications and RF applications due to their reliability, versatility, and compatibility with various devices and systems.
Cable mounting type allows easy installation and connection to cables, providing flexibility and convenience in setting up systems and networks.
50 ohm characteristic impedance ensures optimal signal transfer and minimizes signal reflections, making the connector suitable for high frequency and high-speed data transmission applications.
Clamp solder termination provides a reliable and secure connection between the connector and the cable, ensuring stable performance and reducing signal loss.
Male contact gender is commonly used for mating with female connectors, offering a secure and stable connection for better signal transmission.
Plug body style is compact and space-saving, suitable for applications where space is limited, while providing a reliable connection for signal transmission.
Straight mounting style allows for a direct connection without any bends or twists in the cable, minimizing signal loss and ensuring efficient signal transmission.
With maximum operating frequency of 12.4 GHz, this connector is suitable for high-frequency applications requiring reliable signal transmission and performance.
SSMA Connectors M39012/55-4007 attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
MIL Conformity:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
M39012/55-4007 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
BAV99+
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
Cheng-yi Electronic
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
Microsemi
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LM358AN
142-0771-821
Bel Fuse
Bel Fuse's 142-0771-821 SSMA Connector features a body diameter of 0.247", insulation resistance of 1G ohm, and dielectric voltage withstand of 700VAC. Ideal for RF applications up to 26.5 GHz, this connector has a durable brass shell, operates b/w -65°C to 165°C, and offers a characteristic impedance of 50 ohm.
142-9701-301
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Coupling Type: THREADED; Mounting Style: RIGHT ANGLE;
901-9511-1
Amphenol
Amphenol 901-9511-1 SSMA Connector features 0.11 dB insertion loss, GOLD termination, and threaded coupling. Ideal for RF applications up to 12.4 GHz with 50 ohm impedance. Suitable for cable mounting with crimp solder termination and male contact gender.
R125.464.274
Radiall S A
The Radiall S A R125.464.274 is an RF SMA connector with a threaded coupling type and 50 ohm impedance. It features a low insertion loss of 0.3 dB and a VSWR of 1.1, making it ideal for applications requiring high-frequency signal transmission up to 18 GHz, such as in telecommunications and aerospace industries.
132119
Amphenol 132119 is an RF SMA connector with threaded coupling, 0.14 dB insertion loss, and 1.4 VSWR. Ideal for panel mount applications up to 12.4 GHz frequency range, featuring a 50 ohm impedance and crimp solder termination for female contacts.
132414
Amphenol 132414 is an RF SMA connector with dimensions of 0.375" x 0.312" x 0.562". It features a brass shell with gold finish, PTFE insulator, and surface mount termination. Ideal for commercial applications requiring reliable right-angle coax connections on boards.
1059566-1
TE Connectivity
TE Connectivity's 1059566-1 is an SSMA connector with a body diameter of 0.25 inch and insertion loss of 0.13 dB. It is used in RF SMA connectors for applications requiring a max operating frequency of 18 GHz.
1052551-1
TE Connectivity's 1052551-1 is a panel mount SSMA connector with a body length of 1.079 inch and insulation resistance of 10^10 ohm. It is used in RF applications up to 18 GHz, offering a characteristic impedance of 50 ohm and a voltage standing wave ratio of 1.14.
132122RP
The Amphenol 132122RP SSMA Connector features low insertion loss of 0.15 dB, gold termination contact finish, and MIL conformity. Ideal for RF applications up to 12.4 GHz, it has a threaded coupling type and PTFE insulator material. This male plug connector with right-angle mounting is designed for 50 ohm cables with crimp termination.
SMA-J-P-H-ST-PN4
Samtec
SMA-J-P-H-ST-PN4 by Samtec is a RF SMA connector with 50 ohm impedance, gold-plated contacts, and threaded coupling. It has an insulation resistance of 5 Gohm, dielectric voltage rating of 1400VAC, and operates b/w -65 to 125°C. Ideal for commercial applications requiring reliable connections up to 6 GHz frequency.
SMA1112A5-3GT50G-5-50
Amphenol SMA1112A5-3GT50G-5-50 is a 50 ohm RF SMA connector with gold over nickel finish. It features threaded coupling, PTFE insulator, and crimp solder termination for cable mounting. Ideal for applications requiring reliable male plug connectors in right-angle mounting configurations.
R125.462.001W
R125.462.001W by Radiall S A is an RF SMA connector with a 50 ohm impedance, 0.05 dB insertion loss, and 1.04 VSWR. Ideal for panel mounting in applications requiring high durability, it features a gold shell finish, PTFE insulator material, and can operate b/w -65 to 165°C temperatures at up to 18 GHz frequency.
142-0694-101
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: VSWR AT 12.4 GHZ: 1.34, INSERTION LOSS MAX AT 10 GHZ; JESD-609 Code: e4; Panel Mount: NO;
142-0701-631
Ef Johnson
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD (30); Filter Feature: NO; Mounting Style: STRAIGHT;
21_SMA-50-3-15/111_NH
Huber+suhner Ag
21_SMA-50-3-15/111_NH by Huber+suhner Ag is a threaded RF SMA connector with gold finish, suitable for commercial applications. Featuring a characteristic impedance of 50 ohm and max operating frequency of 18 GHz, it offers reliable performance with a VSWR of 1.22. Ideal for use in cable assemblies due to its solder termination and female contact gender.
5691
Carlisle Interconnect Technologies
5691 RF SMA Connector by Carlisle IT features a 50 ohm impedance, gold over nickel termination finish, and PTFE insulator material. Ideal for commercial applications, this panel-mount connector offers durability with 500 cycles and operates up to 18 GHz frequency range.
1051654-1
TE Connectivity's 1051654-1 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.15 dB Insertion Loss, and 165 °C Max Operating Temperature. Ideal for RF applications up to 12.4 GHz with RG 188 cable type and PTFE insulator material.
142-0801-806
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; MIL Conformity: NO; DIN Conformance: NO;
142-1701-616
Bel Fuse 142-1701-616 is an RF SMA connector with 50 ohm impedance, 0.06 dB insertion loss, and 1400VAC dielectric voltage. Ideal for commercial applications, it offers a durability of 500 cycles and operates b/w -65 to 165°C temperatures at frequencies up to 26.5 GHz.
R124154003W
R124154003W by Radiall S A is an RF SMA connector with gold termination, threaded coupling, and PTFE insulator. With 50 ohm impedance, it operates up to 18 GHz. Ideal for cable mounting applications requiring a male plug with right-angle mounting style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
M39012/55-3009
TE Connectivity's M39012/55-3009 is a threaded RF SMA connector with a 50 ohm characteristic impedance. It has a max operating frequency of 12.4 GHz and can be used with cable types RG 58, RG 142, and RG 223. Ideal for applications requiring high insulation resistance and low insertion loss.
Kings Electronics
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: THREADED; Termination Contact Finish: GOLD; Filter Feature: NO;
Sv Microwave
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Termination Type: SOLDER; Contact Material: BERYLLIUM COPPER/COPPER ALLOY;
Midwest Microwave
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Characteristic Impedance: 50 ohm; Manufacturer Series: SMA; Coupling Type: THREADED;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Termination Contact Finish: GOLD; Characteristic Impedance: 75 ohm;
M39012/94-3003
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1414VAC; No. of Connectors: ONE;
Winchester Interconnect
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: M39012/94; Mating Contact Finish: NOT SPECIFIED; Insulator Material: POLYTETRAFLUOROETHYLENE;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Termination Type: SOLDER; Additional Features: STANDARD: MIL-C-39012;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Filter Feature: NO; Coupling Type: THREADED;
M39012/26-0101
RF TNC CONNECTOR; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2100VAC; Body Depth: 1.108 inch; Body Diameter: .625 inch; Mounting Style: STRAIGHT;
M39012/57-3029
RF SMA CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; No. of Ports: 1; Minimum Operating Temperature: -65 Cel; Coupling Type: THREADED;
RF SMA CONNECTOR; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Total No. of Contacts: 1; Insulation Resistance: 5000000000 ohm; Mounting Type: CABLE;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: SMA; Body or Shell Style: JACK; Filter Feature: NO;
M39012/93-3001
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Type: SOLDER;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; Panel Mount: NO; Characteristic Impedance: 50 ohm;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: STANDARD: MIL-C-39012; Mounting Type: BOARD; Mounting Style: STRAIGHT;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Termination Type: SOLDER; Mounting Style: STRAIGHT;
M39012/80B3101
RF SMA CONNECTOR; Reliability: MIL-G-45204; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Mounting Style: RIGHT ANGLE; Minimum Operating Temperature: -65 Cel;
TE Connectivity's M39012/80B3101 is a threaded RF SMA connector with a body length of 0.68 inch and depth of 0.666 inch. It has an insulation resistance of 5G ohm, operates at temperatures ranging from -65 to 165 °C, and is commonly used in MIL-C-39012 applications.
M39012/55-3030
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: SMA; Additional Features: STANDARD: MIL-C-39012; DIN Conformance: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved