Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol's M39012/16-0014 BNC Connector has a body diameter of 0.593", withstands 2100VAC, and operates b/w -65 to 165°C. Ideal for RF applications with RG-142 cable types, it features a characteristic impedance of 50 ohm and durability up to 500 cycles.
Median Price
$8.967
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
PEI Genesis
1+ parts
$6.920
100+ parts
$6.370
1k+ parts
-
10k+ parts
Powell Electronics
$8.490
$7.550
Interstate Connecting
$8.611
$7.154
$6.940
Heilind Electronics
$9.323
$7.519
$7.284
TTI
$9.360
$7.580
$7.500
AE Petsche
$11.575
Mouser Electronics
$12.960
$11.380
Verical
$4.398
$4.047
$3.879
CDM Electronics
$30.640
Master Electronics
$7.280
$6.190
Component Electronics Inc.
$5.380
$4.040
$3.500
Nova Conductors
$6.725
Vyrian
American Connector Supply Corp
EMSNET
Microwave Components, LLC
Electronic Expediters
Bristol Electronics
Atlantic Semiconductor
Q Components
IBS Electronics
$9.439
$9.088
Van Brakel Electronic
Mil-Aero Solutions, Inc.
ACDS - Activité Composants Distribution Service
Electronics Depot
Aztec Data Supply Inc.
$1.814
Semicontronic
$4.590
$4.475
$4.452
Continental Prestige Electronics
$5.470
$5.360
Gateway Technologies
$5.490
$4.886
Advanced Electronics
$5.600
Corohmni
$5.939
Singapore Electronics
$6.038
$5.615
$5.373
$5.132
Netroflash
$6.590
Authorized Procurement Solutions
Argo Parts USA
Perfect Parts
Assy Fe
Cyclops Electronics Ltd (Excess)
The compact size allows for easy installation in tight spaces.
High insulation resistance ensures minimal signal loss and interference.
Can withstand high voltage levels, making it suitable for various applications.
The deeper body provides secure connection and stability.
Meets military standards for reliability and performance.
Bayonet coupling ensures quick and secure connection.
Can operate in high temperature environments without any degradation in performance.
Suitable for use in extreme cold conditions.
Specifically designed for RF applications, ensuring optimal signal transmission.
Low VSWR indicates minimal signal loss and reflection.
Withstands repeated mating cycles without compromising performance.
Suitable for cable installations, providing versatility in setups.
Matches standard impedance requirements for RF applications.
Brass construction offers durability and corrosion resistance.
Compatible with RG-142 cables for seamless integration.
Crimp termination provides a secure and reliable connection.
Low withdrawal force ensures easy disconnection when needed.
Male contacts are commonly used in RF applications for efficient mating.
Low contact resistance ensures minimal signal loss and high conductivity.
Plug-style connector for easy and secure connection.
Straight mounting style for simple and convenient installation.
Coaxial contact design for optimized signal transmission.
High insertion force ensures secure connection and reliability.
Locking mounting option provides additional security in high-vibration environments.
Capable of handling high-frequency signals up to 4 GHz.
Meets MIL-C-39012 standards for reliability and performance.
BNC Connectors M39012/16-0014 attributes and parameters. Explore more BNC Connectors devices from Amphenol
Additional Features:
Body Depth:
Body Diameter:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Contact Gender:
Contact Resistance:
Contact Style:
Coupling Type:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
MIL Conformity:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Reliability:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
Minimum Withdrawal Force (N):
M39012/16-0014 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rugao Dachang Electronic
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
EU2B-YS2J03F
Idec
ROTARY SWITCH;
31-5539
Asc Capacitors
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Mating Contact Finish: NOT SPECIFIED; Characteristic Impedance: 50 ohm; Termination Type: SOLDER; Coupling Type: BAYONET;
2903
Ddk
2903 by Ddk is a BNC Connector with Bayonet coupling, PTFE insulator, and RF BNC connector type. It has a VSWR of 1.2, 75 ohm impedance, male contact gender, plug body style, and straight mounting for cable applications.
M39012/18-0102
Kings Electronics
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: YES; Mounting Type: CABLE AND PANEL; Insulator Material: POLYTETRAFLUOROETHYLENE;
5-225395-7
TE Connectivity
TE Connectivity's 5-225395-7 BNC Connector features 0.2 dB insertion loss, 1.3 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, this bayonet-coupled connector with PTFE insulator is MIL compliant and terminates via crimping for male contacts on cables.
5-1634556-0
5-1634556-0 by TE Connectivity is a BNC Connector with 50 ohm impedance, PTFE insulator, and zinc alloy shell. Ideal for RF applications up to 4 GHz, it features bayonet coupling, female contact gender, and solder termination. Operating from -55°C to 85°C, this connector offers high durability with 50 cycles.
R142.562.000
Radiall S A
Radiall S A's R142.562.000 BNC Connector features low 0.14 dB insertion loss, gold over nickel termination, and 1.3 VSWR for 75 ohm systems up to 1.5 GHz. Ideal for RF applications requiring high-frequency signal transmission with reliable soldered connections in straight mounting configurations.
5344
Pomona Electronics
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Additional Features: APPLICABLE CABLES: RG 58/U; RG 58A/U; RG 58C/U; RG 141/U; RG 141A/U; Termination Type: CRIMP;
5226990-3
The TE Connectivity 5226990-3 BNC Connector features a body length of 0.581", insulation resistance of 5G ohm, and max operating frequency of 4GHz. Ideal for RF applications, this female connector with right-angle mounting is designed for commercial reliability in temperatures ranging from -55 to 85°C.
5227222-2
Tyco Electronics Amp
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Termination Type: SOLDER; Characteristic Impedance: 50 ohm;
5225398-7
TE Connectivity's 5225398-7 RF BNC Connector has an Insulation Resistance of 5x10^9 ohm, MIL Conformity, and a Max Operating Temperature of 165°C. Ideal for applications requiring a durable connector with characteristic impedance of 50 ohm, such as in RF systems operating up to 4 GHz.
M39012/24-0001
RF BNC CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; MIL Conformity: YES; Body or Shell Style: RECEPTACLE; DIN Conformance: NO;
13-25
SPC TECHNOLOGY/ MULTICOMP
13-25 BNC Connector by Spc Technology/Multicomp features a Panel Mount design with Bayonet Coupling. Made of Polytetrafluoroethylene, it is an RF BNC Connector with Female Contact Gender and Socket Body Style. Ideal for straight mounting applications in various electronic devices.
D-621-0036
TE Connectivity's D-621-0036 is a BNC connector with bayonet coupling, PES insulator, and max temp of 125°C. Ideal for RF applications, it has a polarized key, solder termination, and female contact gender. Suitable for cable and panel mounting in 115/230VAC systems.
M39012/22-0001
RF BNC CONNECTOR; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2100VAC; Maximum Operating Temperature (Cel): 165; Insulation Resistance: 5000000000 ohm; Mounting Type: CABLE AND PANEL;
112116RP
Amphenol
The Amphenol 112116RP is a BNC connector with gold termination and bayonet coupling. It features PTFE insulator material, ideal for RF applications. This female crimp connector is designed for cable mounting in straight configuration.
5-1634523-1
TE Connectivity 5-1634523-1 is a BNC Connector with Bayonet coupling, Polymethylpentene insulator, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it features a female solder termination in a straight jack style for panel mounting.
UBJ27
Vertiv
RF BNC CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: JACK; No. of Ports: 1; Panel Mount: YES;
M39012/24-0002
Delta Electronics Manufacturing
RF BNC CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-PRF-39012, CAPTIVE CONTACT; Body or Shell Style: RECEPTACLE; DIN Conformance: NO;
031-70526-11
Amphenol's 031-70526-11 BNC Connector features 5000000000 ohm Insulation Resistance, 2100VAC Dielectric Withstanding Voltage, and -65 to 165 °C Operating Temperature. Ideal for RF applications with a max frequency of 12 GHz, this female connector has a bayonet coupling type and is made of polytetrafluoroethylene insulator material.
31-5431
Amphenol 31-5431 RF BNC Connector features 0.2 dB insertion loss, 50 ohm impedance, and 4 GHz max operating frequency. Ideal for panel mount applications with gold termination finish and bayonet coupling type. Suitable for board and panel mounting in RF systems requiring low VSWR.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
M39012/16-0101
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 4 GHz; Insulator Material: POLYTETRAFLUOROETHYLENE; Insertion Loss: .2 dB;
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: MIL-C-39012; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2100VAC; Shell Material: BRASS;
Automatic Connector
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Insertion Loss: .2 dB; Filter Feature: NO;
TE Connectivity's M39012/16-0101 BNC Connector features 0.2 dB insertion loss, 50 ohm impedance, and 4 GHz max operating frequency. Ideal for RF applications, it has bayonet coupling, PTFE insulator, and solder termination for male contacts on cables.
Winchester Interconnect
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Termination Type: CLAMP SOLDER; Filter Feature: NO;
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Coupling Type: BAYONET; Termination Type: CLAMP;
Defense Logistics Agency
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Poles: 1; Contact Style: COAX; DIN Conformance: NO;
RF BNC CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; Mating Contact Finish: GOLD; Additional Features: STANDARD: MIL-PRF-39012, CAPTIVE CONTACT; Body or Shell Style: RECEPTACLE;
Amphenol's M39012/24-0001 BNC Connector features 0.2 dB insertion loss, 50 ohm impedance, and 4 GHz max operating frequency. Ideal for RF applications, it is MIL conformant with a bayonet coupling type and polytetrafluoroethylene insulator. Suitable for panel mounting, it has a hermetic option and operates b/w -65 to 165 °C.
RF BNC CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; Maximum Operating Frequency: 4 GHz; Manufacturer Series: BNC; Insulator Material: POLYTETRAFLUOROETHYLENE;
Amphenol's M39012/24-0002 BNC Connector features 0.2 dB insertion loss, 1.3 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, this hermetic connector is panel mountable with bayonet coupling for secure connections in military and aerospace systems.
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: YES; Body or Shell Style: RECEPTACLE; Coupling Type: BAYONET;
RF BNC CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; MIL Conformity: YES; IEC Conformity: NO; Termination Contact Finish: GOLD;
M39012/20-0007
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Mounting Style: RIGHT ANGLE; Manufacturer Series: M39012/20-0007;
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; Coupling Type: BAYONET; Additional Features: STANDARD: MIL-PRF-39012, APPLICABLE CABLES: RG 142, RG 223, RG 303, RG 400, CAPTIVE CONTACT;
The Winchester Interconnect M39012/20-0007 is a BNC connector with 0.57" body diameter, 0.3 dB insertion loss, and gold termination. Ideal for RF applications up to 4 GHz, it features a bayonet coupling type and PTFE insulator material. Suitable for RG-55 cables, this connector has a 50 ohm impedance and silver shell finish.
M39012/20-0101
Winchester Interconnect's M39012/20-0101 BNC Connector features 0.3 dB insertion loss, gold termination contact finish, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, this bayonet-coupling connector with PTFE insulator is MIL compliant. It has a VSWR of 1.35 and uses clamp solder termination on cables.
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; DIN Conformance: NO; Additional Features: STANDARD: MIL-PRF-39012, APPLICABLE CABLES: RG 58, RG 179, RG 303, CAPTIVE CONTACT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved