Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CABLE ASSEMBLY;
Median Price
$25.720
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
< 1k
Amphenol Cables on Demand
1+ parts
$17.420
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$34.020
$24.580
$23.040
DigiKey
PEI Genesis
Verical
Chip1Stop
Nova Conductors
$24.156
Electro Sonic
$30.620
$24.150
$23.130
Vyrian
Rapid Electronics
IBS Electronics
TME
Corohmni
$4.493
Advanced Electronics
$5.543
Ampacity Inc.
$14.810
AZTECH Wire
$15.422
Gateway Technologies
$23.608
$21.010
Continental Prestige Electronics
$23.673
Netroflash
Singapore Electronics
$25.968
$23.111
$22.072
Argo Parts USA
Assy Fe
Electrical Wires & Cables CS-DSDHD15MF0-025 attributes and parameters. Explore more Electrical Wires & Cables devices from Amphenol
Connector Accessory Type:
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
1N4148WS
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
Bkc Semiconductors
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
2N2222A
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1487587-1
TE Connectivity
TE Connectivity 1487587-1 is a shielded communication cable with 26 AWG wire gauge. It features 4 conductors and PLUG connectors on both sides. Ideal for data transmission applications requiring secure connections.
P018-010
Tripp Lite
6713GR013
Alpha Wire
Alpha Wire 6713GR013 is a stranded wire with tin finish, rated at 600V. Constructed with modified polyphenylene ether insulator, it operates b/w -40 to 105°C. Ideal for flexible cord and fixture wire applications due to its copper alloy conductor and CE/CSA/UL approvals.
3365/16-300SF
3m Electronic Products Division
3m Electronic Products Division's 3365/16-300SF is a FLAT FLEXIBLE CABLE with 7 STRANDED conductors, TIN finish, and UL/CUL approvals. Rated at 300V, it has a wire gauge of 28 AWG and length of 91.44mm. Ideal for electrical applications requiring flexibility and durability in confined spaces.
12345
Helukabel
Helukabel 12345 is a CONTROL CABLE with STRANDED construction, PVC jacket, and shielding. It has CE, CSA, DIN, EN, UL, VDE approvals for use in tool machinery for MEASURING & MONITORING at -40 to 80°C. With 600V rating and 0.5mm2 cross section area made of BARE COPPER conductors.
19013
WIRE AND CABLE;
CC174RP-15
Infinite Electronics International
6713GR005
Alpha Wire's 6713GR005 is a stranded wire with TIN finish, rated at 600V. Featuring POLYPHENYLENE ETHER insulation, it operates b/w -40 to 105 °C. Ideal for applications requiring flexibility and fixture wiring in various industries.
18256
The Helukabel 18256 is a CE, DIN, EAC approved cable with stranded construction and polyurethane jacket. It has a rated voltage of 300V and insulator made of thermoplastic elastomer. Ideal for robust applications in dry, damp, and wet rooms with operating temperatures ranging from -40 to 90°C.
5203
Quabbin Wire & Cable
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Minimum Operating Temperature: -20 Cel; Application: JUMPER AND PATCH CABLE FOR CATEGORY 5E; Insulator Material: POLYETHYLENE;
P568-010
82-28-3010
Molex
Molex 82-28-3010 is a FLAT RIBBON CABLE with 10 conductors, STRANDED construction, and TIN finish. It has a rated voltage of 300V, operating temperature range from -20°C to 105°C. Ideal for applications requiring flexibility and high conductivity in electrical wiring setups.
55PC0211-16-9CS2502
TE Connectivity's 55PC0211-16-9CS2502 is a 600V rated wire with TIN finish, suitable for temperatures ranging from -65 to 150°C. Featuring 16 AWG copper alloy conductor and 19X29 stranding, it is ideal for flexible cord and fixture wire applications in the electrical industry.
687980002
Molex 687980002 is a PVC jacketed cable assembly with shielding, rated for 30V and 3A. It features USB 2.0 C MALE connectors on both sides and has 22 conductors. This cable is commonly used in electrical applications requiring reliable data transfer.
1552300064
55A0111-12-0
TE Connectivity's 55A0111-12-0 cable is a stranded wire with 600V rating, TIN finish, and 2.98mm² cross-section area. Ideal for general purpose applications, it operates b/w -65°C to 150°C temperatures and features copper alloy conductor material.
282783-006
TE Connectivity's 282783-006 wire is a flexible cord with copper alloy conductor, rated at 600V. With a temperature range of -65 to 150°C, it features 24 AWG gauge, TIN finish, and is suitable for electrical applications requiring durable and reliable wiring solutions.
E90339-000
WIRE AND CABLE; Cable Types: 10613; Wire Gauge (AWG): 0; Length: 6.096 mm; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 150 Cel;
2273122-4
TE Connectivity 2273122-4 is a 22 AWG communication cable with rated voltage of 125V, suitable for temperatures ranging from -30 to 80°C. It has a max current rating of 4A and diameter of 5mm, making it ideal for various electrical wiring applications.
31886
Wentronic
CABLE ASSEMBLY; Connector Side-1: HDMI 19P MALE; Connector Side-2: HDMI 19P MALE; Rated Voltage: 300 V; Shielding: NO; DIN Conformity: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CS-DSDMDB09MF-003
Amphenol
CS-DSSMDB9MF0-005
Wires and Cables;
CS-DSPMDB25MF-006
CS-DSDMDB15MF-002.5
CS-DSDMDB25MF-010
CS-DSDMDB25MF-015
CS-DSDMDB09MF-010
CS-DSDMDB09MF-002.5
CS-DSSMDB9MM0-005
CS-DSDMDB09MF-025
CS-DSDMDB15MM-002.5
CS-DSDMDB09MF-005
CS-DSDMDB15MM-010
CS-DSSMDB37MM-005
CS-DSDMDB50MF-015
CS-DSDMDB15MF-005
CS-DSDHD15MF0-002.5
CS-DSDHD15MF0-005
CS-DSDHD15MM0-002.5
CS-DSDHD15MF0-010
CABLE ASSEMBLY; Connector Side-1: HD15 MALE; Connector Side-2: HD15 FEMALE; Shielding: NO; Wire & Cable Name: CABLE ASSEMBLY; DIN Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved