Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PCB CONNECTOR; Option: GENERAL PURPOSE; Body or Shell Style: SOCKET; Manufacturer Series: C702A; DIN Conformance: NO; IEC Conformity: YES;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Gateway Technologies
1+ parts
$2.000
100+ parts
1k+ parts
$1.780
10k+ parts
Singapore Electronics
$2.200
$2.046
$1.958
$1.870
Headers & Edge Type Connectors C70210M0087062 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Amphenol
Body or Shell Style:
Connector Type:
DIN Conformance:
IEC Conformity:
MIL Conformity:
Manufacturer Series:
Option:
C70210M0087062 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Bytesonic Electronics
Good-ark Electronics
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
Central Semiconductor
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
RC0402FR-071KL
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
Toshiba
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
DF11-18DS-2C
Hirose Electric
DF11-18DS-2C by Hirose Electric is a 2-row board connector with 18 contacts, rated at 2A signal current. It features a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 650VAC. Ideal for commercial applications requiring durable connectors with crimp termination and black insulator color.
1291
Keystone Electronics
PCB CONNECTOR; Option: GENERAL PURPOSE; MIL Conformity: NO; Contact Material: NOT SPECIFIED; IEC Conformity: NO; DIN Conformance: NO;
15-31-1033
Molex
The Molex 15-31-1033 header connector features a body length of 0.661", insulation resistance of 1Gohm, and dielectric voltage rating of 1500VAC. Ideal for board connections in commercial applications, it has a female contact gender, polyamide insulator material, and operates b/w -40 to 105°C.
DF11-6DS-2C
DF11-6DS-2C by Hirose Electric is a 2-row board connector with 6 contacts, rated at 2A signal current. Featuring a mating contact pitch of 0.079", it has a dielectric voltage of 650VAC and operates b/w -30 to 85°C. Ideal for commercial applications requiring durable connectors with crimp termination and locking mounting option.
TSW-103-07-G-S-LL
Samtec
The Samtec TSW-103-07-G-S-LL is a 3-contact board connector with gold-plated phosphor bronze contacts. It has a mating contact pitch of 0.1" and termination via soldering, making it ideal for commercial applications requiring reliable connections on PCBs with a terminal pitch of 2.54mm.
20021521-00010T1LF
Amphenol Communications Solutions
The Amphenol Communications Solutions 20021521-00010T1LF is a board connector with 0.05" mating contact pitch, suitable for headers & edge type connectors. It features gold over nickel termination, 100000000 ohm insulation resistance, and operates b/w -40 to 105 °C. Ideal for applications requiring a durable male connector with 10 contacts in a commercial setting.
10-11-2023
Molex 10-11-2023 is a board connector with 0.1" mating contact pitch, POLYAMIDE insulator, and 1000VAC dielectric voltage. It's ideal for commercial applications requiring a durable, polarized housing with 2 contacts and crimp termination for 22-30 AWG wires.
B04B-PASK(LF)(SN)
J S T Mfg
B04B-PASK(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.079" mating contact pitch and 800VAC dielectric voltage. Featuring GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, it operates b/w -25 to 85 °C and has UL 94V-0 flammability rating. Ideal for PCB applications requiring high insulation resistance and rated current of 3A.
DTM06-2S
TE Connectivity
TE Connectivity's DTM06-2S is a 2-contact board connector with 0.157" pitch, rated for 7.5A signal current at 250V. Its glass-filled polyamide insulator and UL94V-0 flammability rating make it ideal for cable mounting applications requiring a polarized housing and wire termination.
B4B-XH-A(LF)(SN)
B4B-XH-A(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.098" mating contact pitch, 1000000000 ohm insulation resistance, and 3A rated current. It is used for board-to-board connections in applications requiring a male contact gender, POLARIZED HOUSING polarization key, and TIN termination finish.
51281-0594
Molex 51281-0594 FFC/FPC connector with 0.020" pitch, 5 contacts, and glass-filled LCP insulator. Ideal for board mounting in commercial applications. Operating temp -20 to 85°C, UL94V-0 rated, female contact type with surface mount termination.
XF2M-3015-1A-R100
Omron
Omron XF2M-3015-1A-R100 is a FFC/FPC connector with 30 contacts, rated at 0.5A signal current. It features gold (Au) - nickel (Ni) finish, 0.020" pitch, and liquid crystal polymer insulator. Suitable for board mounting applications with durability of 20 cycles and operating temperature range from -30 to 85°C.
TSW-102-07-L-S
Samtec's TSW-102-07-L-S is a 2-contact board connector with a 0.1" pitch, ideal for commercial applications. Featuring matte tin over nickel termination, gold mating finish, and phosphor bronze contacts, it operates b/w -55°C to 125°C. With UL certification and a 94V-0 flammability rating, this male connector offers reliable performance in various electronic devices.
357-074-442-278
Edac
Edac 357-074-442-278 is a CARD EDGE CONNECTOR with 74 contacts in 2 rows, featuring a 0.156" pitch and rated for 5A signal current. With UL certification, it has a temperature range of -40 to 105°C, suitable for applications requiring high insulation resistance and dielectric voltage withstand capabilities.
50-37-5023
The Molex 50-37-5023 is a board connector with a mating contact pitch of 0.098". It features an insulation resistance of 1G ohm and can withstand up to 1000VAC. This dual-polarized connector, suitable for commercial applications, has a rated current of 3A and operates b/w -40°C to 105°C.
FH12A-40S-0.5SH(55)
FH12A-40S-0.5SH(55) by Hirose Electric is a FFC/FPC connector with 40 contacts, gold termination finish, and 500M ohm insulation resistance. It operates b/w -40 to 85°C, has a mating pitch of 0.02", and is used in board mounting applications requiring high durability and reliability.
746-014-520-606
Edac 746-014-520-606 is a 14-contact card edge connector with 0.125" pitch, suitable for PCB mounting. Featuring 3A signal current rating, it has a dielectric strength of 1500VAC and operates b/w -40 to +105°C. Ideal for applications requiring high insulation resistance and UL94V-0 flammability rating.
801-43-030-10-003000
Mill-max Mfg
801-43-030-10-003000 by Mill-max Mfg is a GOLD-finished BOARD CONNECTOR with 30 contacts on a 2.54mm pitch. It features FEMALE contacts in SOCKET style for STRAIGHT mounting on the board. Ideal for high-quality solder connections in electronic applications.
M20-9990446
Harwin Plc
The Harwin PLC M20-9990446 is a board connector with 0.1" mating contact pitch, 3A signal current rating, and -40 to 105°C operating temperature range. It is ideal for commercial applications requiring a durable male receptacle with solder termination and UL flammability rating of 94V-0.
AS0B326-S78N-7F
Hon Hai Precision Industry
AS0B326-S78N-7F by Hon Hai Precision Industry is a card edge connector with 230 contacts, gold termination finish, and 500VAC dielectric voltage. It has a mating pitch of 0.02", insulation resistance of 250M ohm, and operates b/w -40 to 85°C. Ideal for board mounting applications in commercial settings due to its durability and reliability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Amphenol
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved