Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 39-53-2084 FFC/FPC connector with 8 contacts, 2 rows, and 0.049" pitch. POLYBUTYLENE TEREPHTHALATE insulator material. Ideal for board mounting in commercial applications requiring a reliable right-angle connection.
Median Price
$0.869
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Arrow
1+ parts
$0.699
100+ parts
-
1k+ parts
10k+ parts
Adafruit Industries
$0.816
$0.775
Master Electronics
$0.749
$0.676
Mouser Electronics
$1.080
$0.819
$0.787
$0.688
Chip1Stop
$1.110
Distrelec
$1.152
$1.109
$0.707
DigiKey
$1.240
Element14
$1.258
$1.228
$1.191
$1.139
TTI Europe
$0.549
$0.510
Powell Electronics
$0.610
$0.590
RS (Exports)
$0.893
$0.857
$0.720
TTI
$0.661
$0.648
$0.514
Newark
$0.965
$0.903
Verical
$0.680
Farnell
$0.577
Digiode
$0.664
TestEquity
Nova Conductors
Rapid Electronics
$1.142
Vyrian
LIBRA Elektronik GmbH
IBS Electronics
$0.613
$0.588
VNN
Bristol Electronics
Flex Direct, LLC
Inventory MP
Semicontronic
$0.467
$0.455
$0.453
Corphita
$0.629
Argo Parts USA
$0.691
$0.670
Advanced Electronics
Continental Prestige Electronics
$1.130
$0.622
Aztec Data Supply Inc.
$6.540
Andel Nordic
$7.444
$7.147
Perfect Parts
Kepictronics
Assy Fe
The tight mating contact pitch ensures secure and reliable connections between the connector and mating contacts.
The compact body length allows for space-efficient installation of the connector in various electronic devices.
The narrow body width enables the connector to be used in applications where space is limited.
The moderate body depth provides a balance between compact size and the ability to accommodate multiple contacts.
The use of Polybutylene Terephthalate as insulator material ensures durability, resistance to heat, and overall reliability.
Having two rows loaded allows for a higher density of contacts, enabling the connector to handle more connections within a limited space.
The precise PCB contact row spacing facilitates easy and accurate alignment with the PCB for streamlined installation.
The FFC/FPC connector type offers flexibility in terms of connecting flat flexible cables or printed circuit boards, making it versatile for various applications.
The UL 94V-0 flammability rating indicates that the connector meets strict safety standards and is resistant to combustion, ensuring a high level of safety.
With a total of 8 contacts, this connector provides ample connectivity options for different electronic components or peripherals.
The board mounting type allows for secure attachment to a circuit board, ensuring stable connections and durability in electronic assemblies.
The 1.25mm terminal pitch provides a standardized spacing for easy integration with other components or devices.
The staggered PCB contact pattern enhances signal integrity and reduces crosstalk by arranging contacts in a strategic layout.
The solder termination type offers a reliable and durable connection method for attaching the connector to the circuit board.
The zero insertion force (ZIF) mechanism minimizes stress on the contacts during insertion and removal, helping to prolong the connector's lifespan.
The female contact gender is commonly used for connections that require stability and secure mating with male contacts, ensuring a reliable signal transmission.
The right-angle mounting style allows for versatile installation options, especially in devices where space constraints may necessitate angled connections.
The bellows type contact style provides resilience and reliable contact pressure, ensuring stable connections even in challenging environments.
The ZIF mechanism also helps control the maximum insertion force, preventing damage to the contacts and ensuring smooth connectivity.
The moderate terminal length facilitates easy soldering and connection to the circuit board, ensuring a secure attachment.
The locking mounting option adds an extra layer of security to the connector, preventing accidental disconnection or loosening during operation.
The commercial reliability rating indicates that the connector is suitable for standard commercial applications, offering a good balance between performance and cost-effectiveness.
Headers & Edge Type Connectors 39-53-2084 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Rows Loaded:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
39-53-2084 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Design/Specification - 5571,5597 Series Molding Resin 09/Dec/2014
PCN Assembly/Origin - Mult Devs Location 02/Oct/2023
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
LM358AN
Signetics
Space Power Electronics
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
Electronic Transistors
SM02B-PASS-TBT(LF)(SN)
J S T Mfg
SM02B-PASS-TBT(LF)(SN) by J S T Mfg is a board connector with 0.079" mating contact pitch, 800VAC dielectric voltage, and 3A signal current rating. Ideal for applications requiring a male right-angle surface mount connector with tin finish, such as PCB connections in electronics assemblies.
MM60-52B1-E1-R650
Japan Aviation Electronics Industry
MM60-52B1-E1-R650 by Japan Aviation Electronics is a 52-contact card edge connector with gold over nickel finish. It has a mating contact pitch of 0.031", operates b/w -40 to 80°C, and offers a dielectric voltage of 424VAC. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating of 94V-0.
S2B-PH-K-S
S2B-PH-K-S by J S T Mfg is a BOARD CONNECTOR with BRASS contacts and TIN finish. Featuring 2 contacts, it has a terminal pitch of 2mm and is ideal for RIGHT ANGLE mounting on boards. This connector is UL 94V-0 rated, making it suitable for various electronic applications.
50-57-9010
Molex
The Molex 50-57-9010 is a board connector with 10 contacts, 0.1" pitch, and 0.099" body width. It features glass-filled polyester insulator material and is UL94V-0 rated. Ideal for commercial applications requiring a reliable female SQ pin-skt contact style with crimp termination on cable mounting.
09032966825
Harting Electronics & Kg
09032966825 by Harting Electronics & Kg is a Headers & Edge Type Connector with Mating Contact Pitch of 0.1", Insulation Resistance of 1000000000000 ohm, and Dielectric Withstanding Voltage of 1000VAC. Ideal for board connections in commercial applications due to its durability, UL Flammability Code rating of 94V-0, and rated current signal capacity of 2A.
TCMD-08-01
Samtec
Samtec's TCMD-08-01 is a 2-row board connector with 16 contacts made of phosphor bronze. It has a terminal pitch of 2mm and supports IDC/solder termination. Ideal for applications requiring male contact gender, straight mounting style, and compatibility with both board and cable mounting types.
S6B-PH-SM4-TB(LF)(SN)
S6B-PH-SM4-TB(LF)(SN) by J S T Mfg is a 6-contact board connector with 0.079" pitch, 800VAC dielectric voltage, and -25 to 85°C operating range. Ideal for PCB applications requiring male contact, surface mount termination, and right-angle mounting.
DF40C-100DP-0.4V(51)
Hirose Electric
DF40C-100DP-0.4V(51) by Hirose Electric is a 100-contact board stacking connector with 0.016" pitch, 100VAC dielectric voltage, and gold termination finish. Ideal for PCB applications requiring a durable, polarized male plug with liquid crystal polymer insulator material. Operating temperature range from -35 to 85°C makes it suitable for commercial use in various electronic devices.
DF40C-90DS-0.4V(51)
DF40C-90DS-0.4V(51) by Hirose Electric is a 90-contact board stacking connector with gold termination, liquid crystal polymer insulator, and phosphor bronze contacts. It has a mating pitch of 0.016", withstands 100VAC, and operates b/w -35 to 85°C. Ideal for PCB applications requiring high durability and reliability in commercial settings.
1367073-1
TE Connectivity
TE Connectivity 1367073-1 is a 2-row board connector with 0.031" mating contact pitch. Featuring liquid crystal polymer insulator, it has a max operating temperature of 85°C and -55°C min. Ideal for commercial applications, this female connector offers 20 contacts and surface mount termination.
B06B-PASK(LF)(SN)
B06B-PASK(LF)(SN) by J S T Mfg is a board connector with 6 contacts, 0.079" pitch, and 800VAC dielectric voltage. It features TIN finish, UL standard, and operates b/w -25 to 85 °C. Ideal for PCB applications requiring male connectors with press fit termination and rectangular contact pattern.
EHR-3
EHR-3 by J S T Mfg is a 3-contact BOARD CONNECTOR with 0.098" pitch, 0.15"x.28" body size, and UL 94V-0 flammability rating. It is used for cable mounting with female contacts terminated via crimping, ideal for electronic applications requiring compact and reliable connections.
66506-322LF
Amphenol Communications Solutions
Amphenol's 66506-322LF is a 16-contact, 2-row board connector with a terminal pitch of 2.54mm and UL94V-0 flammability rating. It features male contacts for solder termination and straight mounting style, ideal for headers & edge type connectors in various electronic applications.
FTSH-105-01-L-DV-K-FR
Samtec's FTSH-105-01-L-DV-K-FR is a 10-contact, 2-row male board connector with tin finish and nickel barrier. Featuring a terminal pitch of 1.27mm, it is UL 94V-0 rated for surface mount applications. Ideal for use in headers & edge type connectors on PCBs.
47553-0001
47553-0001 by Molex is a PCB connector with 0.1" pitch, gold over nickel finish, and 6 contacts. Ideal for commercial applications, it has a temperature range of -30 to 85°C and offers durability up to 2500 cycles.
SHR-07V-S-B
SHR-07V-S-B by J S T Mfg is a 1-row loaded board connector with 7 contacts. It has a UL flammability code of 94V-0 and uses crimp termination. This connector is commonly used in cable mounting applications.
53253-0470
The Molex 53253-0470 is a board connector with a mating contact pitch of 0.079 inches and a body width of 0.144 inch. It features bright tin termination contact finish and is commonly used in commercial applications for its reliability and multiple mating parts availability.
45108-010030
3m Electronic Products Division
The 3M Electronic Products Division's 45108-010030 is a board connector with a mating contact pitch of 0.05", insulation resistance of 1G ohm, and dielectric voltage rating of 1250VAC. It has female contacts, operates b/w -65 to 125°C, and is suitable for commercial applications requiring reliable signal currents up to 2.5A.
XAP-10V-1
XAP-10V-1 by J S T Mfg is a 10-contact BOARD CONNECTOR with FEMALE contacts, PLUG body style, and CRIMP termination. It has UL 94V-0 flammability rating and is used for CABLE mounting applications in Headers & Edge Type Connectors.
FTSH-105-01-L-DV-K-A-TR
Samtec's FTSH-105-01-L-DV-K-A-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring gold over nickel finish, it has a rated signal current of 3.4A and operates b/w -55 to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
39-53-2165
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Terminal Pitch (mm): 1.25;
39-53-2145
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Width: .197 inch; Contact Material: NOT SPECIFIED;
39-53-2205
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Additional Features: ROHS COMPLIANT, TRAY PACKAGING; Insulator Material: POLYESTER;
39-53-2044
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Type: SOLDER; Maximum Insertion Force (N): ZIF;
39-53-2124
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Maximum Insertion Force (N): ZIF; Terminal Length: .138 inch;
39-53-2055
The Molex 39-53-2055 FFC/FPC connector has a mating contact pitch of 0.049", UL flammability code of 94V-0, and total of 5 contacts. It is used for board mounting with solder termination, featuring a staggered PCB contact pattern. This commercial-grade connector is ideal for applications requiring a reliable female bellowed type contact design.
39-53-2105
Molex 39-53-2105 FFC/FPC Connector has 10 contacts with 0.049" pitch, 0.719" body length, and 0.197" width. Ideal for PCB applications with staggered contact pattern and solder termination in commercial settings.
39-53-2245
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Material: POLYBUTYLENE TEREPHTHALATE; Reference Standard: UL;
39-53-2285
Molex 39-53-2285 FFC/FPC connector has 28 contacts with 0.049" pitch, 0.197" width, and 0.386" depth. It is used in PCB applications with 1.9812mm row spacing for commercial reliability. The connector features staggered PCB contact pattern, solder termination, and UL94V-0 flammability rating.
39-53-2204
Molex 39-53-2204 FFC/FPC connector with 20 contacts, 0.049" pitch, and 0.213" body width. Ideal for PCB applications requiring right angle mounting and staggered contact pattern. Features polyester insulator material and solder termination for reliable commercial use.
39-53-2064
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Type: SOLDER; No. of PCB Rows: 2;
39-53-2224
The Molex 39-53-2224 is a FFC/FPC connector with a mating contact pitch of 0.049 inches. It has a total of 22 contacts and is designed for board mounting in right angle style. This connector, made of polyester insulator material, is commonly used in commercial applications requiring reliable connections.
39-53-2065
The Molex 39-53-2065 is a FFC/FPC connector with a mating contact pitch of 0.049 inches. It has a body length of 0.522 inch and a body width of 0.197 inch. This connector is commonly used in commercial applications for board mounting, with its solder termination type and bellowed type contact style.
39-53-2085
Molex 39-53-2085 FFC/FPC Connector has 8 contacts with 0.049" pitch, 0.62"x.197"x.386" dimensions, and 1.9812mm PCB row spacing. It is used in commercial applications for straight mounting on boards with solder termination and ZIF insertion force.
39-53-2144
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Type: BOARD; Mating Contact Pitch (inch): 0.049;
39-53-2034
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Minimum Withdrawal Force (N): ZIF; Mating Contact Finish: NOT SPECIFIED;
39-53-2135
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Mating Contact Pitch (inch): 0.049;
39-53-2075
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; PCB Contact Pattern: STAGGERED; No. of PCB Rows: 2;
39-53-2125
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Style: BELLOWED TYPE; No. of Rows Loaded: 1;
39-53-2074
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Minimum Withdrawal Force (N): ZIF; PCB Contact Pattern: STAGGERED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved