Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Amphenol AT04-08PA-P028 is a 2-row combination line connector with 8 contacts, made of polyethylene. It operates b/w -55°C to 125°C, suitable for cable mounting with wire termination. The receptacle has a body size of 1.433" x 0.933" x 1.87", ideal for various industrial applications.
Median Price
$8.970
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Newark
1+ parts
$5.380
100+ parts
1k+ parts
-
10k+ parts
TTI
$8.400
$7.420
$6.540
$6.200
Mouser Electronics
$8.440
$7.280
$6.700
$6.360
Farnell
$9.499
$8.513
Element14
$9.694
Waytek Inc.
$12.500
$10.030
$8.610
Master Electronics
$6.770
$5.610
$5.060
Powell Electronics
$10.870
$9.690
Verical
$7.965
Chip1Stop
$11.100
Nova Conductors
$6.665
VNN
Vyrian
IBS Electronics
$9.495
$7.868
$7.097
Rapid Electronics
TME
$11.040
Corohmni
$1.039
Ampacity Inc.
$6.280
Aranea Global
$6.531
$6.270
Gateway Technologies
$6.561
$5.839
Singapore Electronics
$7.217
$6.711
$6.423
$6.134
AZTECH Wire
$8.423
Continental Prestige Electronics
$8.600
$7.100
Aztec Data Supply Inc.
$10.690
Argo Parts USA
The compact body length allows for easy installation in tight spaces or crowded areas.
The slim body width makes it suitable for applications where space is limited.
The sufficient body depth provides room for multiple contacts and wiring within the connector.
Polyethylene is known for its durability and resistance to impact, heat, and chemicals, ensuring long-lasting performance.
Having two rows loaded with contacts allows for increased connectivity options and versatility in applications.
With a high maximum operating temperature, this connector can withstand a wide range of environments.
The low minimum operating temperature ensures functionality in cold climates or refrigerated settings.
As a combination line connector, this product offers flexibility for both power and signal connections in one device.
Having a total of 8 contacts provides ample connectivity for various systems or components.
The cable mounting type simplifies installation and allows for secure attachment to cables.
The wire termination type offers ease of connection and maintenance for the wiring within the connector.
The female contact gender ensures compatibility with male connectors, enabling seamless connectivity in systems.
The receptacle body style provides a secure housing for the contacts and offers protection against external elements.
The round pin and socket contact style ensures reliable electrical connection and minimizes the risk of signal loss or interference.
Combination Line Connectors AT04-08PA-P028 attributes and parameters. Explore more Combination Line Connectors devices from Amphenol
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Empty Shell:
Filter Feature:
Insulator Material:
Mating Info.:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Termination Type:
Total No. of Contacts:
AT04-08PA-P028 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
2N2222A
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Temic Semiconductors
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
DT04-12PA-C015
TE Connectivity
TE Connectivity's DT04-12PA-C015 is a Combination Line Connector with 12 contacts, rated at 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125°C. Ideal for applications requiring a polarized connector with crimp termination and strain relief mounting.
DT04-4P-CE01
TE Connectivity's DT04-4P-CE01 is a Combination Line Connector with 4 contacts, rated at 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized connector with UL certification and strain relief mounting option.
8-968972-2
TE Connectivity 8-968972-2 is a Combination Line Connector with dimensions of 1.024" x 1.024" x 0.945". Rated for 28V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 120°C. With 12 contacts, it's used in applications requiring CRIMP termination at 115/230VAC mains connector rating.
1565380-1
TE Connectivity's 1565380-1 is a Combination Line Connector with dimensions of 0.827" x 1.299" x 0.622". Rated for 12V, it has 28 contacts and operates b/w -30°C to 105°C. Ideal for cable mounting applications, it features POLYBUTYLENE TEREPHTHALATE insulator material.
4-1437290-0
TE Connectivity 4-1437290-0 is a Combination Line Connector with 34 contacts, rated at 250V. Featuring a Mating Contact Pitch of 0.118", it has an Insulation Resistance of 100MΩ and operates b/w -40°C to 125°C. Ideal for commercial applications requiring reliable cable connections with IDC termination.
DTM04-4P-E004
TE Connectivity's DTM04-4P-E004 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125°C, and can handle a signal current of 7.5A. Ideal for cable mounting applications requiring a polarized male connector with strain relief option.
DTM1312PA12PBGR01
TE Connectivity's DTM1312PA12PBGR01 is a Combination Line Connector with 24 contacts, rated voltage of 250V, and signal current of 7.5A. Ideal for board mounting applications, it has a temperature range from -55 to 125°C and UL flammability rating of 94V-0.
54201415
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYAMIDE; DIN Conformance: NO; Body Depth: 1.378 inch;
AT06-3S-KIT01
Amphenol
Amphenol's AT06-3S-KIT01 is a female combination line connector with 3 contacts, rated at 13A. Made of polyethylene, it operates b/w -55 to 125°C and is ideal for cable mounting applications. The compact plug measures 0.894" x 0.724" x 1.181", making it suitable for various electronic devices.
1473416-1
TE Connectivity's 1473416-1 is a Combination Line Connector with dimensions of 1.266" x 1.268" x 1.36". Rated for 250V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and operates b/w -40°C to 125°C. With a total of 26 contacts, it is used in cable mounting applications at mains connector ratings of 115/230VAC.
54200409
Fci
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Insulator Material: POLYAMIDE; Mixed Contacts: NO;
1-967629-1
TE Connectivity 1-967629-1 is a Combination Line Connector with dimensions of 1.476" x 1.396" x 1.205". Rated for 28V, it has GLASS FILLED POLYAMIDE insulator and operates b/w -40°C to 120°C. With 18 contacts, it's used in applications requiring CRIMP termination and PANEL mounting at mains ratings of 115/230VAC.
1-776163-1
TE Connectivity 1-776163-1 is a Combination Line Connector with 35 contacts, rated at 17A. It features a mating contact pitch of 0.157", POLYBUTYLENE TEREPHTHALATE insulator material, and operates b/w -40°C to 125°C. Ideal for board mounting applications requiring a reliable right-angle male connector with solder termination.
DTM1312PA12PBR008
TE Connectivity's DTM1312PA12PBR008 is a 24-contact combination line connector with 2 loaded rows. It features a rated voltage of 250V, UL flammability code of 94V-0, and operates b/w -55°C to 125°C. Ideal for board mounting applications requiring a male contact gender and solder termination.
12015792
Aptiv
Aptiv's 12015792 Combination Line Connector features dimensions of 0.846" x 0.886" x 1.606", with NYLON insulator and operating temp range of -40 to 125°C. It has a total of 2 contacts, female contact gender, and crimp termination type. Ideal for commercial applications requiring reliable cable mounting with locking and detent options.
770103-1
TE Connectivity's 770103-1 is a Combination Line Connector with dimensions of 1.07" x 0.635" x 1.625". It features TIN/GOLD FLASH termination, POLYAMIDE66 insulator, and operates b/w -55 to 105°C. Ideal for applications requiring a female connector with 15 contacts in a panel mount configuration.
1718490-2
TE Connectivity's 1718490-2 is a Combination Line Connector with dimensions of 1.465" x 0.925" x 0.165". Rated for 36V, it operates b/w -40°C to 120°C. With UL certification, this connector has 9 contacts and is ideal for cable mounting applications.
0-0350779-1
TE Connectivity 0-0350779-1 is a Combination Line Connector with dimensions of 1.051" x 0.58" x 1.079". It has an Insulation Resistance of 100MΩ, operating b/w -55°C to 105°C. Ideal for commercial applications, it features a male contact gender and crimp termination type for durability in cable mounting setups.
DT04-12PB-P021
TE Connectivity's DT04-12PB-P021 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this male connector has a total of 12 contacts and UL certification.
1-180908-0
TE Connectivity's 1-180908-0 is a Combination Line Connector with 2 contacts, POLYAMIDE insulator, and 1.24" body length. Ideal for applications requiring a male contact gender, operating temperatures from -40 to 105°C, and mains connector rating of 115/230VAC.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AT04-4P-KIT01
The Amphenol AT04-4P-KIT01 is a Combination Line Connector with 4 contacts, rated at 13A signal current. It features a body size of 0.827" x 0.772" x 1.811", made of polyethylene insulator material. Ideal for cable mounting applications, it operates b/w -55°C to 125°C temperature range.
AT04-3P-RY01
AT04-3P-RY01 by Amphenol is a combination line connector with a body length of 1.933" and depth of 1.91". It has a max operating temperature of 125°C and min operating temperature of -55°C. This male receptacle connector has 9 contacts and can handle a rated current of 13A, making it suitable for various applications requiring reliable signal transmission.
AT04-2P-RD01
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; Body Width: .669 inch; No. of Rows Loaded: 1;
AT04-2P
The Amphenol AT04-2P is a combination line connector with 2 contacts, rated for 13A signal current. It features a polyethylene insulator and operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT04-2S connectors, using crimp termination for male contact pins.
AT04-2P-SR01BLK
The Amphenol AT04-2P-SR01BLK is a male combination line connector with 2 contacts, rated for 13A signal current. Its polyethylene insulator allows operation b/w -55°C to 125°C. Ideal for cable mounting applications due to its compact dimensions of 0.673" x 0.669" x 2.193".
AT04-2P-SR02BLK
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 1; Body Length: .673 inch; Body Depth: 2.193 inch;
AT04-12PA-PM11
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYETHYLENE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Maximum Operating Temperature (Cel): 125;
AT04-2P-KIT01
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Total No. of Contacts: 2; Body Length: .673 inch;
AT04-3P-PM12
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Contact Material: NOT SPECIFIED; Mounting Type: CABLE AND PANEL;
AT04-4P-RD01
Amphenol's AT04-4P-RD01 is a male combination line connector with 4 contacts, rated for 13A signal current. With dimensions of 0.826" x 0.771" x 1.811", it features a polyethylene body and shell, suitable for cable mounting applications in various industries.
AT04-2P-BLK
AT04-2P-BLK by Amphenol is a combination line connector with dimensions of 0.673" x 0.669" x 1.717". It has a max operating temperature of 125°C and a min operating temperature of -55°C. This male receptacle connector has 2 contacts, rated for a signal current of 13A, and is designed for cable mounting with crimp termination. Its insulator material is made of polyethylene.
AT04-3P
The Amphenol AT04-3P is a combination line connector with 3 contacts, rated at 13A. It has a body size of 0.961" x 0.827" x 1.7", made of polyethylene for -55 to 125°C applications. This male receptacle connector uses square pin/socket contact style and crimp termination for cable mounting with mating part AT04-3S.
AT04-12PA
The Amphenol AT04-12PA is a 2-row combination line connector with 12 contacts, rated for 13A signal current. It features polyethylene insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT04-12SA connectors using crimp termination.
AT04-3P-L012
The Amphenol AT04-3P-L012 is a male combination line connector with 3 contacts, rated for 13A signal current. Its polyethylene insulator can withstand temperatures from -55°C to 125°C. With a body size of 1.594" x 1.252" x 1.701", it is suitable for cable and panel mounting applications.
AT04-4P-PM11
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 125; Body Width: 1.46 inch; Total No. of Contacts: 4;
AT04-4P-MM01
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 2; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
AT04-12PA-SRGRY
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; No. of Rows Loaded: 2; Insulator Material: POLYETHYLENE;
AT04-3P-RD01
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Length: .961 inch; Rated Current - Signal: 13 A; Contact Material: NOT SPECIFIED;
AT04-3P-SR01BLK
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: WIRE; Insulator Material: POLYETHYLENE; Mounting Type: CABLE;
AT04-4P
The Amphenol AT04-4P is a combination line connector with 4 contacts, rated at 13A. It has a body size of 0.827" x 0.772" x 1.811", made of polyethylene, suitable for cable mounting applications. Operating temperature ranges from -55°C to 125°C, ideal for various electronic systems requiring reliable female contact connections.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved