Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Style: STRAIGHT; Additional Features: APPLICABLE CABLES: RG 178/U; RG 196/U, VSWR MAX AT 2.5 GHZ, INSERTION LOSS MAX AT 1 GHZ;
Median Price
$8.174
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
< 1k
Mouser Electronics
1+ parts
$11.640
100+ parts
$7.940
1k+ parts
$7.930
10k+ parts
-
Master Electronics
$7.570
Verical
$8.778
$7.434
Powell Electronics
$6.990
$5.910
Van Brakel Electronic
Gateway Technologies
$6.000
$5.339
Singapore Electronics
$6.600
$6.137
$5.873
$5.609
MCX & MMCX Connectors 919-121P-51SX attributes and parameters. Explore more MCX & MMCX Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Style:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Option:
Panel Mount:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
919-121P-51SX Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
1N4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
BAV99WT1G
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Yageo
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
Comchip Technology
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
73415-1472
Molex
The Molex 73415-1472 is a RF MMCX connector with a snap coupling type and a 50 ohm characteristic impedance. It is used for board mounting applications, featuring a solder termination type and a female contact gender.
MMCX-J-P-H-ST-SM1-K-TR
Samtec
Samtec's MMCX-J-P-H-ST-SM1-K-TR is a 50 ohm RF MMCX connector with POLYTETRAFLUOROETHYLENE insulator. Featuring a 0.136" body diameter and 0.197" body depth, it is ideal for surface mount board applications requiring a reliable female jack connector with brass shell material.
135-3801-201
Cinch Connectivity Solutions
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e4; Panel Mount: NO; MIL Conformity: NO;
133-8433-101
Johnson Components
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Insertion Loss: .2 dB; Additional Features: APPLICABLE CABLES: RG-179, INSERTION LOSS MAX AT 1 GHZ;
R113.426.000W
Radiall S A
R113.426.000W by Radiall S A is a RF MCX CONNECTOR with 50 ohm impedance, 0.07 dB insertion loss, and 1.35 VSWR. Ideal for board and panel mounting in applications requiring high durability up to 6 GHz frequency range.
1-1337582-0
TE Connectivity 1-1337582-0 RF MCX Connector features 500000000 ohm Insulation Resistance, 0.03 dB Insertion Loss, and POLYTETRAFLUOROETHYLENE Insulator Material. Ideal for applications requiring a durable, polarized housing connector with a characteristic impedance of 50 ohm and max operating frequency of 6 GHz.
1085221-1
TE Connectivity's 1085221-1 RF MCX Connector features a 0.2 dB insertion loss, 50 ohm characteristic impedance, and 4 GHz max operating frequency. Ideal for commercial applications requiring a male plug with solder termination on a board mount.
908-NM41300
Amphenol
Amphenol's 908-NM41300 RF MMCX Connector has a Dielectric Withstanding Voltage of 700VAC, GOLD Termination Contact Finish, and operates up to 6 GHz. Ideal for RG-316 cables in commercial applications due to its durability of 500 cycles and impedance of 50 ohm.
1-1337583-0
TE Connectivity 1-1337583-0 RF MCX Connector has an Insulation Resistance of 1x10^9 ohm, Insertion Loss of 0.1 dB, and operates up to 6 GHz. Ideal for commercial applications requiring a durable, right angle mounting board connector with female contact gender.
1-1634002-0
TE Connectivity 1-1634002-0 is an RF MMCX connector with gold finish, suitable for RG-174 cable termination. Featuring a characteristic impedance of 50 ohm and max operating frequency of 6 GHz, it is ideal for commercial applications requiring reliable signal transmission at temperatures ranging from -55 to 155°C.
60626021110620
Wuerth Elektronik & Kg
RF MCX CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
16_MMCX-50-1-1/111_OE
Huber+suhner Ag
16_MMCX-50-1-1/111_OE by Huber+suhner Ag is a RF MMCX connector with characteristic impedance of 50 ohm, suitable for RG-196A/U cable types. It features gold-plated beryllium copper contacts, operates up to 6 GHz frequency, and has a durability of 500 cycles. Ideal for commercial applications requiring reliable right-angle mounting with locking option.
262101
Amphenol's 262101 is an RF MMCX connector with SNAP coupling, PTFE insulator, and male contact gender. Ideal for cable mounting with crimp termination, it suits applications requiring reliable plug-style connectors in straight mounting configuration.
133-8701-211
Bel Fuse
Bel Fuse's 133-8701-211 RF MCX Connector boasts a dielectric voltage of 1400VAC, insulation resistance of 1000000000 ohm, and durability of 500 cycles. Ideal for commercial applications requiring a reliable, high-frequency (up to 6 GHz) connector with a characteristic impedance of 75 ohm.
MCX-J-P-H-RA-SM1
Samtec's MCX-J-P-H-RA-SM1 is a RF MCX connector with 50 ohm impedance, GOLD finish, and SNAP coupling. Ideal for applications requiring surface mount termination, right angle mounting, and operating frequency up to 6 GHz.
82_MMCX-50-0-1/111_NE
82_MMCX-50-0-1/111_NE by Huber+suhner Ag is a RF MMCX connector with characteristic impedance of 50 ohm. It operates up to 6 GHz, has a VSWR of 1.11, and withstands temperatures from -55 to 155 °C. Ideal for commercial applications requiring durable board mounting connectors with female contact gender.
R113.426.000
R113.426.000 RF MCX Connector by Radiall S A features a 50 ohm characteristic impedance, 0.07 dB insertion loss, and 1.35 VSWR for applications up to 6 GHz. With a durability of 500 cycles, it is ideal for commercial use in board mounting with solder termination for high-frequency signal transmission.
1512
SPC TECHNOLOGY/ MULTICOMP
RF MCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Ports: 1; Insertion Loss: .1 dB; Mounting Option-1: LOCKING;
252102-75
Amphenol 252102-75 is a RF MCX connector with 0.1 dB insertion loss, 1.5 VSWR, and 6 GHz max operating frequency. It has gold termination contact finish, snap coupling type, and acetal/polytetrafluoroethylene insulator material. Ideal for applications requiring 75 ohm characteristic impedance in cable mounting setups.
MCX-J-C-H-ST-CA1
Samtec's MCX-J-C-H-ST-CA1 RF connector has a 50 ohm impedance, 6 GHz frequency, and 1400VAC dielectric voltage. Ideal for commercial applications, it features gold contact finish, PTFE insulator, and RG-174 cable compatibility. With a temperature range of -65 to 125 °C, this jack-style connector is reliable for various RF connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved