Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF N CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 3500VAC; Body or Shell Style: JACK;
Median Price
$0.913
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
DigiKey
1+ parts
$1.260
100+ parts
$0.908
1k+ parts
$0.772
10k+ parts
$0.724
Master Electronics
-
$0.670
$0.640
$0.590
Verical
Component Electronics Inc.
$0.460
$0.350
$0.300
Galco
$0.500
Powertech Controls
Vyrian
VNN
Nova Conductors
IBS Electronics
$0.945
$0.902
$0.832
Pegasus Components GmbH
Quotebeam
Ampacity Inc.
$0.630
Gateway Technologies
$8.000
$7.120
Singapore Electronics
$8.800
$8.184
$7.832
$7.480
Argo Parts USA
Continental Prestige Electronics
Netroflash
Authorized Procurement Solutions
N-Type Connectors 82-6158 attributes and parameters. Explore more N-Type Connectors devices from Amphenol
Additional Features:
Body Diameter:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Style:
Coupling Type:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
82-6158 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Hitachi
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Yangzhou Yangjie Electronics
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
Lite-on Semiconductor
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EZ-600-NMH-X
Infinite Electronics International
EZ-600-NMH-X by Infinite Electronics International is an N-Type Connector with 0.1 dB Insertion Loss, 50 ohm Impedance, and 6 GHz Operating Frequency. It is ideal for RF applications requiring threaded coupling, PTFE insulator, and male contact gender. Suitable for cables with crimp termination in IEC compliant setups.
1-1478419-0
TE Connectivity
TE Connectivity 1-1478419-0 is an N-Type Connector with threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for RF applications up to 11 GHz, it features a brass shell, solder termination, and operates b/w -55°C to 85°C.
R161.004.000
Radiall S A
Radiall S A R161.004.000 N-Type Connector features 0.17 dB insertion loss, 1.2 VSWR, and 11 GHz max operating frequency. Ideal for RF applications requiring threaded coupling, gold over nickel termination, and 50 ohm impedance on cables.
172117
Amphenol 172117 N-Type Connector features 3500VAC Dielectric Withstanding Voltage, 1.3 VSWR, and 50 ohm Impedance. Ideal for RF applications up to 11 GHz with threaded coupling and gold contact finish for reliable signal transmission. Suitable for commercial use in panel mount configurations.
6039
Ddk
RF N CONNECTOR; Contact Gender: FEMALE; Coupling Type: THREADED; Body or Shell Style: RECEPTACLE; Mounting Style: STRAIGHT; MIL Conformity: YES;
4000-1041-010
The Radiall S A 4000-1041-010 is an N-Type Connector with a threaded coupling type and gold termination contact finish. It is a male RF connector used for cable mounting with clamp solder termination, suitable for plug body style and straight mounting applications.
138-4693-011
Vertiv
RF N CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Durability: 500 Cycles; Shell Material: BRASS;
172236
Amphenol 172236 is an N-Type RF connector with threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for applications up to 11 GHz, it features a VSWR of 1.3 and solder termination. Commonly used in cable assemblies requiring right-angle mounting for male plug connectors.
225389-2
The TE Connectivity 225389-2 is an N-Type Connector with 50 ohm impedance, 0.3 dB insertion loss, and 1.5 VSWR. Ideal for RF applications up to 11 GHz, it features a threaded coupling type and PTFE insulator material. With durability of 500 cycles, it is commonly used in commercial settings for cable termination at temperatures ranging from -65 to 165°C.
082-6093-RFX
Amphenol 082-6093-RFX is an N-Type Connector with 0.15 dB Insertion Loss, 1.3 VSWR, and 11 GHz Max Operating Frequency. Ideal for RF applications requiring a threaded coupling type, gold termination finish, and 50 ohm impedance. Suitable for panel or cable mounting in high-frequency communication systems.
082-202
Amphenol 082-202 N-Type Connector features 0.15 dB insertion loss, 1.3 VSWR, and 50 ohm impedance. Ideal for RF applications up to 11 GHz, with threaded coupling and silver termination for reliable signal transmission. Suitable for cable mounting with clamp solder termination in male plug configuration.
172102H243
Amphenol 172102H243 N-Type Connector features threaded coupling, gold/silver finish, and PTFE insulator. With 50 ohm impedance and 1.3 VSWR, it operates up to 11 GHz. Ideal for RF applications requiring male crimp termination on cables.
11_N-50-3-5/133_NE
Huber+suhner Ag
Huber+suhner Ag's 11_N-50-3-5/133_NE is an RF N CONNECTOR with threaded coupling, gold over nickel finish, and 50 ohm impedance. Suitable for cables, it operates at a max frequency of 11 GHz. MIL and IEC conformity ensure high-quality performance in various applications.
082-6099-RFX
Amphenol's 082-6099-RFX is an N-Type Connector with a threaded coupling type and a max operating frequency of 18 GHz. It has an insertion loss of 0.15 dB and a voltage standing wave ratio of 1.3. This connector is suitable for panel mount and cable applications, with a termination type of crimp solder and a characteristic impedance of 50 ohm.
138-4416-007
Bel Fuse
Bel Fuse's 138-4416-007 N-Type Connector features 5000000000 ohm Insulation Resistance, 0.15 dB Insertion Loss, and 3500VAC Dielectric Withstanding Voltage. Ideal for RF applications up to 11 GHz, this connector has a durability of 500 cycles and operates b/w -65°C to 165°C.
R161022000
Radiall S A R161022000 is an N-Type Connector with 0.17 dB Insertion Loss, 1.2 VSWR, and 50 ohm Impedance. Ideal for RF applications up to 11 GHz, featuring GOLD OVER NICKEL Termination and POLYTETRAFLUOROETHYLENE Insulator for reliable performance in cable installations.
EZ-240-NMH-X
EZ-240-NMH-X by Infinite Electronics International is an N-Type Connector with gold termination contact finish. It features a threaded coupling type and beryllium copper contact material. Ideal for RF applications, this connector has a crimp termination type and is designed for male contacts on cables.
82-368
The Amphenol 82-368 N-Type Connector features a 0.625" body diameter, 0.15 dB insertion loss, and 1.3 VSWR. Ideal for RF applications up to 11 GHz, this panel-mount connector has a threaded coupling type and is made of brass with PTFE insulator for durability in commercial settings.
R161252000
R161252000 by Radiall S A is an N-Type Connector with 0.17 dB Insertion Loss, Gold (Au) - Nickel (Ni) finish. MIL Conformity and 50 ohm Impedance make it ideal for RF applications up to 11 GHz. Suitable for panel mount installations, this connector features a threaded coupling type and PTFE insulator material.
138-4408-007
RF N CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 1400VAC; Insulator Material: POLYTETRAFLUOROETHYLENE; Durability: 500 Cycles; Shell Material: BRASS;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
82-6156
RF N CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; Panel Mount: YES; Coupling Type: THREADED; Mounting Type: CABLE AND PANEL;
82-6106
RF N CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 3500VAC; DIN Conformance: NO;
82-6163
RF N CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Cable Types: SEMI-RIGID; Insertion Loss: .15 dB;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved