Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol's 082-6099-RFX is an N-Type Connector with a threaded coupling type and a max operating frequency of 18 GHz. It has an insertion loss of 0.15 dB and a voltage standing wave ratio of 1.3. This connector is suitable for panel mount and cable applications, with a termination type of crimp solder and a characteristic impedance of 50 ohm.
Median Price
$16.774
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Farnell
1+ parts
$9.550
100+ parts
$7.740
1k+ parts
-
10k+ parts
Mouser Electronics
$17.890
$13.120
$11.080
DigiKey
$18.040
$13.030
$11.633
Newark
$18.770
$14.390
$13.270
Element14
$20.180
$15.590
$12.180
Master Electronics
$11.870
Verical
$15.659
Powell Electronics
$10.960
$7.390
$6.410
Nova Conductors
$8.438
Vyrian
VNN
IBS Electronics
$15.876
Electro Sonic
$10.650
$6.620
Connector Distribution Corp
Right Parts Inc.
Ampacity Inc.
$8.120
Gateway Technologies
$7.509
Netroflash
$8.269
Singapore Electronics
$9.281
$8.631
$8.260
$7.888
Continental Prestige Electronics
Perfect Parts
Argo Parts USA
Panel mount feature allows for secure and stable installation on a panel, providing convenience and easy access for connections.
Low insertion loss ensures minimal signal degradation when transmitting data, making this connector ideal for high-frequency applications.
Gold termination contact finish offers excellent conductivity and corrosion resistance, ensuring reliable and long-lasting connections.
Threaded coupling provides a secure connection that is resistant to vibrations and environmental factors, making it suitable for rugged environments.
Polytetrafluoroethylene insulator material offers high dielectric strength and excellent signal clarity, contributing to overall signal integrity.
RF N connector type is commonly used in high-frequency applications up to 18 GHz, making it a versatile choice for various communication systems.
Low VSWR of 1.3 indicates efficient power transfer with minimal reflections, ensuring optimal performance and signal quality.
Compatible with both cable and panel mounting options, offering flexibility in installation and usage scenarios.
Standard characteristic impedance of 50 ohm ensures compatibility with a wide range of RF devices and systems, reducing signal loss and interference.
Crimp solder termination type provides a secure and durable connection, suitable for high-performance applications that require reliability.
Female contact gender allows for easy mating with male connectors, offering a versatile and user-friendly design for various connectivity needs.
Jack body style is a common industry standard that provides a stable and secure connection, ensuring compatibility with a wide range of devices.
Straight mounting style offers a simple and direct connection, suitable for applications where signal integrity and alignment are crucial.
Capable of operating at frequencies up to 18 GHz, making it suitable for high-frequency applications such as telecommunications, radar systems, and test equipment.
N-Type Connectors 082-6099-RFX attributes and parameters. Explore more N-Type Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
Voltage Standing Wave Ratio:
082-6099-RFX Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
FDLL4148
National Semiconductor
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Leshan Radio
M39012/04-0002
Winchester Interconnect
RF N CONNECTOR; Option: GENERAL PURPOSE; Reliability: MIL-C-39012; Contact Gender: FEMALE; MIL Conformity: YES; No. of Ports: 1;
TC-400-NMH-RA-D
Times Microwave Systems
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Ports: 1; Filter Feature: NO; Mounting Option-1: LOCKING;
138-4449-007
Cinch Connectivity Solutions
RF N CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 3500VAC; Termination Type: CRIMP; Mounting Type: CABLE;
1-225092-1
TE Connectivity
TE Connectivity's 1-225092-1 N-Type Connector features 0.827" body diameter, 0.15 dB insertion loss, and 165°C max operating temp. Ideal for RF applications with threaded coupling, PTFE insulator, and 50 ohm impedance. Suitable for RG 393 cables with male gender contact in commercial settings up to 11 GHz frequency.
R161322000W
Radiall S A
R161322000W by Radiall S A is an N-Type Connector with 0.17 dB Insertion Loss, gold termination finish. It has a threaded coupling type and 50 ohm impedance, suitable for RF applications up to 11 GHz. Ideal for panel and cable mounting in high-frequency communication systems.
R161.083.000
R161.083.000 by Radiall S A is an N-Type Connector with 0.827" body diameter, 5000000000 ohm insulation resistance, and 0.17 dB insertion loss. Ideal for RF applications up to 11 GHz, it features a gold over nickel termination finish, PTFE insulator material, and brass shell construction for durability in commercial settings.
1-1337416-0
TE Connectivity 1-1337416-0 is an N-Type Connector with 0.787" body diameter, 0.3 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for RF applications up to 11 GHz, it features a threaded coupling type and crimp termination for durability in commercial settings.
138-4404-007
Vertiv
RF N CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1050VAC; Voltage Standing Wave Ratio: 1.3; Contact Style: COAX;
M39012/01-0503
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Shell Material: BRASS; Mounting Type: CABLE; Total No. of Contacts: 1;
4000-1041-009
Radiall S A's 4000-1041-009 N-Type Connector features GOLD finish, THREADED coupling, and MALE gender. Ideal for RF applications, it is a PLUG connector with CLAMP SOLDER termination for CABLE mounting.
EZ-400-NMH-X
L-com
EZ-400-NMH-X by L-com is an N-Type Connector with 0.05 dB Insertion Loss, 1.25 VSWR, and 50 ohm Impedance. Ideal for RF applications up to 6 GHz, it features threaded coupling and PTFE insulator for reliable performance in cable installations. Suitable for crimp termination with male contact gender, this connector ensures secure connections in high-frequency environments.
1203-14-9
Kings Electronics
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; JESD-609 Code: e4; Mating Contact Finish: GOLD;
TC-600-NMH-X
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; MIL Conformity: YES; Termination Type: CRIMP;
M39012/02-0513
M39012/02-0513 by Winchester Interconnect is an N-Type RF connector with gold-plated contacts, suitable for 50 ohm systems up to 11 GHz. It features a threaded coupling, PTFE insulator, and brass shell with nickel finish. Ideal for military applications due to MIL-C-39012 conformity and reliable crimp termination.
172219
Amphenol
Amphenol 172219 is an N-Type Connector with MIL Conformity, threaded coupling, and PTFE insulator. Ideal for RF applications up to 11 GHz, it features a VSWR of 1.3, 50 ohm impedance, and right-angle mounting on cables using crimp termination.
24_N-50-3-51/19-_NE
Huber+suhner Ag
24_N-50-3-51/19-_NE by Huber+suhner Ag is an RF N CONNECTOR with characteristic impedance of 50 ohm and max operating frequency of 18 GHz. It features GOLD OVER NICKEL termination contact finish, suitable for panel mount applications. MIL and IEC conformity ensure high quality standards.
082-5373
Amphenol 082-5373 is an N-Type Connector with 0.15 dB Insertion Loss, 1.3 VSWR, and 50 ohm Impedance. Ideal for RF applications up to 11 GHz, it features a gold termination finish and threaded coupling for secure connections on panels or cables.
M39012/02-0502
Delta Electronics Manufacturing
Delta Electronics M39012/02-0502 N-Type Connector features threaded coupling, gold finish, and 50 ohm impedance. Ideal for RF applications up to 11 GHz, it is MIL compliant with PTFE insulator for reliable performance in cable installations. Female crimp termination ensures secure connections in high-frequency environments.
R161281300W
R161281300W by Radiall S A is an RF N CONNECTOR with a characteristic impedance of 50 ohm and insertion loss of 0.16 dB. Ideal for applications requiring panel mount connectors, it operates at frequencies up to 11 GHz with threaded coupling type for secure connections.
082-4426-11RFX
Amphenol's 082-4426-11RFX N-Type Connector features 0.15 dB insertion loss, 1.3 VSWR, and 50 ohm impedance. Ideal for RF applications up to 11 GHz, this threaded connector with gold finish is commonly used in cable assemblies for high-frequency signal transmission.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
082-6093-RFX
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: INSERTION LOSS MAX AT 10 GHZ; Termination Contact Finish: GOLD;
082-6034
Amphenol's 082-6034 is an N-Type Connector with a low insertion loss of 0.15 dB and a voltage standing wave ratio of 1.3. It is commonly used in RF applications up to 11 GHz, featuring threaded coupling and gold termination contact finish.
082-6097-RFX
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; JESD-609 Code: e4;
082-6163
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Voltage Standing Wave Ratio: 1.3; Insertion Loss: .15 dB; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
082-6048-1000
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: PLUG;
082-6092-RFX
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: APPLICABLE CABLES: RG 55; RG 142; RG 223; RG 400, INSERTION LOSS MAX AT 10 GHZ; Contact Material: NOT SPECIFIED; Insertion Loss: .15 dB;
082-6096-RFX
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Voltage Standing Wave Ratio: 1.3; IEC Conformity: NO; Termination Type: SOLDER;
082-6098-RFX
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; IEC Conformity: NO; Additional Features: APPLICABLE CABLES: RG 58; RG 58A; RG 58C; RG 141; RG 303, INSERTION LOSS MAX AT 10 GHZ;
082-6101-RFX
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; Termination Contact Finish: GOLD; Filter Feature: NO;
082-6106
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Panel Mount: NO; Maximum Operating Frequency: 11 GHz;
082-6124
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Insertion Loss: .15 dB; Additional Features: INSERTION LOSS MAX AT 10 GHZ, VSWR MAX AT 11 GHZ;
082-6142-1000
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: INSERTION LOSS MAX AT 10 GHZ; Voltage Standing Wave Ratio: 1.3; DIN Conformance: NO;
082-6143-1000
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Panel Mount: YES; Maximum Operating Frequency: 11 GHz;
082-6151-RFX
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Filter Feature: NO; Contact Material: NOT SPECIFIED;
082-6152
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: GOLD; Termination Contact Finish: GOLD; MIL Conformity: NO;
082-6158
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; DIN Conformance: NO; Coupling Type: THREADED;
082-6162
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: JACK; Mounting Style: STRAIGHT; Voltage Standing Wave Ratio: 1.3;
082-62
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Termination Contact Finish: SILVER; Mounting Style: STRAIGHT;
082-63-RFX
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD; IEC Conformity: NO; JESD-609 Code: e4;
082-63
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; Termination Contact Finish: SILVER; Mating Contact Finish: SILVER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved