Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VDC; Contact Style: BELLOWED TYPE; Insulator Material: DIALLYL PHTHALATE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Gateway Technologies
1+ parts
$5.000
100+ parts
1k+ parts
$4.450
10k+ parts
Singapore Electronics
$5.500
$5.115
$4.895
$4.674
Telecom & Datacom Connectors 57-20360-10 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol
Body Width:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Maximum Wire Size:
Minimum Wire Size:
57-20360-10 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
Formosa Microsemi
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Grande Electronics
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS-74301-002
Bel Fuse
Bel Fuse SS-74301-002 is a Telecom & Datacom Connector with 0.68"x.65"x.68" dimensions, matte tin over nickel finish, and polyethylene insulator. It features 2 PCB rows with 8 contacts, staggered pattern on 2.54mm pitch for board mounting applications in commercial settings.
749195-2
TE Connectivity
TE Connectivity's 749195-2 is a EMI shielded connector with 68 contacts, nickel finish, and zinc alloy shell. Ideal for telecom/datacom applications, it features IDC termination, male contact gender, and UL94V-0 flammability rating.
74980111211
Wuerth Elektronik & Kg
74980111211 by Wurth Elektronik is a Telecom & Datacom Connector with Filter Feature, Polyethylene Insulator, and Nickel Shell Finish. It has 8 contacts, Copper Alloy Shell Material, and is UL 94V-0 rated. Ideal for board and panel mounting in telecom and datacom applications.
61400413321
61400413321 by Wurth Elektronik is a USB connector with gold-plated contacts, suitable for telecom & datacom applications. Featuring a dielectric voltage of 750VAC, it has an operating temperature range from -40 to 105°C. With a durable design rated for 1500 cycles, this connector offers reliable performance in commercial settings.
6-569550-3
Commscope
The Commscope 6-569550-3 is a Telecom & Datacom Connector with GLASS FILLED POLYCARBONATE insulator and shell material. It features 8 contacts, IDC termination type, and UL Flammability Code 1863. Ideal for cable mounting applications requiring male plug connectors in telecom and datacom systems.
56579-0576
Molex
The Molex 56579-0576 is a USB connector with gold termination, glass-filled polyphthalamide insulator, and copper alloy contacts. It has a durability of 5000 cycles and operates b/w -20 to 85°C. Ideal for telecom & datacom applications, featuring a polarized housing and rated current of 1A.
428788410
Molex 428788410 is a Telecom & Datacom Connector with 0.61" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board mounting with 0.5" depth, it features matte tin over nickel finish and operates b/w -40 to 85°C.
SS-7188S-A-NF-K1-50
Bel Fuse SS-7188S-A-NF-K1-50 is a 2-row, 8-contact telecom & datacom connector with POLYETHYLENE insulator. Featuring SPLIT BOARD LOCK mounting, it has 0.635" x 0.55" x 0.85" dimensions and NICKEL/TIN finish. Ideal for commercial applications requiring right-angle board mounting with 2.54mm terminal pitch.
74320-1004
Molex 74320-1004 is a Telecom & Datacom Connector with 0.075" pitch, 1.45" body length, and 1000000000 ohm insulation resistance. Ideal for board and panel mounting in telecom and datacom applications due to its gold termination finish, brass contact material, and UL reference standard compliance.
5607-4200-SH
3m Electronic Products Division
5607-4200-SH by 3M is a Telecom & Datacom Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 1G ohm, and Dielectric Withstanding Voltage of 500VAC. Ideal for board mounting applications in telecom and datacom systems, featuring a male plug body style with surface mount termination.
RJE01-660-01
Amphenol
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
ARF6-16-S-D-A-K-TR
Samtec
The Samtec ARF6-16-S-D-A-K-TR is a telecom & datacom connector with 16 contacts, featuring matte tin over nickel finish. With liquid crystal polymer insulator and copper alloy shell, it has a terminal pitch of 0.635mm and operates b/w -40 to 125°C. Ideal for surface mount applications in telecommunications and data communication systems.
UX60SC-MB-5S8(80)
Hirose Electric
The Hirose Electric UX60SC-MB-5S8(80) is a USB connector with 5 contacts, rated at 1A signal current. Featuring a dielectric voltage of 100VAC and insulation resistance of 100MΩ, it's ideal for telecom/datacom applications. With a durable design lasting up to 5000 cycles, this right-angle mount connector has a shell finish of TIN and insulator material made from synthetic resin.
2-5174339-5
TE Connectivity 2-5174339-5 is a Telecom & Datacom Connector with EMI shielding. It has 68 contacts, UL94V-0 rated insulator, and operates b/w -55°C to 105°C. Ideal for commercial applications requiring reliable board-mounted connectors with solder termination.
MUSB-E151-34
MUSB-E151-34 by Amphenol is a USB connector with gold-plated contacts, suitable for telecom/datacom applications. It features a dielectric voltage of 100VAC, insulation resistance of 100M ohm, and operates b/w -40 to 105°C. With a compact design and high reliability, it offers a total of 5 contacts in a right-angle receptacle style for board or panel mounting.
555165-1
TE Connectivity's 555165-1 is a Telecom & Datacom Connector with 0.525" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board mounting in telecom applications, it features a durable design with 750 cycles and solder termination for reliable performance in commercial settings.
PCR-E96LMD
Honda Tsushin Kogyo
PCR-E96LMD by Honda Tsushin Kogyo is a 96-contact telecom/datacom connector with glass-filled polybutylene terephthalate insulator, copper/nickel shell finish, and zinc alloy shell material. It features solder termination, right-angle mounting style for board/panel use, and UL flammability rating of 94V-0.
91483-091
Fci
The Fci 91483-091 is a telecom and datacom connector with a body width of 0.3 inch and depth of 1.291 inch. It has a polyamide insulator material and features a polarized housing for secure connections. This connector is suitable for applications requiring 8 contacts, such as cable mounting in telecommunications and data communication systems.
5558872-1
TE Connectivity's 5558872-1 is a Telecom & Datacom Connector with 0.455" body length, 0.655" body width, and 0.65" body depth. It features Matte Tin termination finish and PBT-POLYESTER insulator material. Ideal for telecom applications with 4 contacts, rated at 1.5A signal current, and operating temperature range of -40 to 85°C.
5520260-4
TE Connectivity 5520260-4 is a Telecom & Datacom Connector with 0.715" body length, 0.655" width, and 0.65" depth. Insulation resistance of 500MΩ makes it ideal for telecom applications. Featuring PBT-POLYESTER insulator material, UL 94V-0 flammability code, and rated current of 1.5A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved