Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Voltage Standing Wave Ratio: 1.3; Maximum Operating Frequency: 4 GHz;
Median Price
$12.670
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
TTI
1+ parts
$8.140
100+ parts
$7.520
1k+ parts
$7.230
10k+ parts
-
DigiKey
$17.200
$12.424
$11.091
Quotebeam
$2.760
Component Electronics Inc.
$3.850
$2.880
$2.500
DF Sales Co.
$16.036
Microwave Components, LLC
MISTER SPROCKETS
American Connector Supply Corp
Resion
American Microsemiconductor Inc.
Gateway Technologies
$10.220
$9.095
Singapore Electronics
$11.242
$10.455
$10.005
$9.555
Perfect Parts
BNC Connectors 31-206 attributes and parameters. Explore more BNC Connectors devices from Amphenol
Additional Features:
Body Depth:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Style:
Coupling Type:
DIN Conformance:
Durability:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
31-206 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
0462-201-16141
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
M85049/85-08W02
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
BSS84-7-F
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
5227161-6
TE Connectivity's 5227161-6 BNC Connector features a body length of 0.581", insulation resistance of 5G ohm, and bayonet coupling type. Ideal for RF applications, this connector has a characteristic impedance of 50 ohm, operates up to 4GHz, and offers durability with 500 cycles.
31-10-RFXG1
Amphenol
Amphenol's 31-10-RFXG1 is a BNC connector with panel mount capability. It has an insertion loss of 0.2 dB and a voltage standing wave ratio of 1.3, making it suitable for RF applications up to 4 GHz.
227161-2
TE Connectivity 227161-2 is a BNC Connector with body dimensions of 0.581" x 0.625" x 0.625". It has an insulation resistance of 5G ohm, operating temperature range from -55 to 85°C, and impedance of 50 ohm. Ideal for RF applications up to 4GHz, it features a bayonet coupling type and glass-filled polybutylene terephthalate insulator material.
31-5486-1010
Amphenol 31-5486-1010 BNC Connector features 0.2 dB insertion loss, 1.35 VSWR, and 4 GHz max operating frequency. Ideal for RF applications requiring a 50 ohm characteristic impedance with gold termination finish for low signal loss. Suitable for board and panel mounting in high-frequency communication systems.
112426
Amphenol 112426 is a BNC connector with gold termination, bayonet coupling, and acetal insulator. Ideal for RF applications with 50 ohm impedance, it features panel mount and solder termination for female contacts in straight mounting style.
1-1478152-0
TE Connectivity's 1-1478152-0 BNC Connector features 0.2 dB insertion loss, 75 ohm impedance, and 2 GHz max operating frequency. Ideal for RF applications, it has a bayonet coupling type and PTFE insulator material for reliable performance in cable installations.
KC-19-258
Kings Electronics
Kings Electronics KC-19-258 BNC Connector features Bayonet coupling, PTFE insulator, 50 ohm impedance. Ideal for RF applications up to 4 GHz with panel and cable mounting options. Female contact gender, jack body style, and crimp solder termination ensure reliable connections.
28-91027
Vertiv
RF BNC CONNECTOR; Manufacturer Series: 28-91027;
112515-75
Amphenol's 112515-75 is a BNC connector with 0.453" body diameter and 0.788" depth, featuring PTFE insulator and nickel shell finish. Ideal for RF applications with 75 ohm impedance, this jack-style connector mounts on boards via solder termination, ensuring reliable commercial performance.
1-5227079-6
TE Connectivity 1-5227079-6 BNC Connector features 5000000000 ohm Insulation Resistance, 0.2 dB Insertion Loss, and POLYETHYLENE Insulator Material. Ideal for RF applications up to 4 GHz with RG 174 and RG 188 cables.
34-1046
Amphenol 34-1046 BNC Connector features 1400VAC Dielectric Voltage, -65 to 165 °C Operating Temp, and 75 ohm Impedance. Ideal for RF applications up to 4 GHz with durable brass shell, PTFE insulator, and crimp termination for commercial reliability in cable or panel mounting.
UG-959/U
Telegartner Karl Gartner
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: COPPER NICKEL GOLD; Mounting Style: STRAIGHT; Insulator Material: POLYTETRAFLUOROETHYLENE;
031-5329-51RFX
Amphenol's 031-5329-51RFX is a BNC connector with bayonet coupling, suitable for RF applications. Featuring a nickel-finished brass shell, it has a characteristic impedance of 50 ohm and can operate b/w -20°C to 165°C. With durability up to 500 cycles, this hermetic connector supports frequencies up to 4 GHz on boards with solder termination.
M39012/16-0101
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: MIL-C-39012; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2100VAC; Shell Material: BRASS;
112134
Amphenol 112134 is a BNC connector with gold termination, bayonet coupling, and acetal insulator. It has a 50 ohm impedance and is suitable for RG-174/U cables in RF applications. The connector features a zinc alloy shell, gold mating contacts, and is designed for commercial reliability.
2-330061-1
TE Connectivity's 2-330061-1 BNC Connector features Bayonet coupling, PTFE insulator, and silver shell finish. Ideal for RF applications with 50 ohm impedance, RG-174/U cable type, and crimp termination. Supports up to 2.5 GHz frequency with a VSWR of 1.35 for commercial reliability.
112508
Amphenol 112508 is a BNC connector with bayonet coupling, suitable for RF applications. Features include 75 ohm impedance, 1.15 VSWR, and 1 GHz operating frequency. Ideal for cable mounting with male contact gender and acetal insulator material.
5413558-1
TE Connectivity's 5413558-1 BNC Connector features a body diameter of 0.414", insulation resistance of 5G ohm, and max operating frequency of 2GHz. Ideal for RF applications, this right-angle jack connector with bayonet coupling is durable with a zinc alloy shell and polymethylpentene insulator.
0731385033
Molex
Molex 0731385033 RF BNC Connector with 0.2 dB insertion loss, 1.3 VSWR, and 50 ohm impedance is ideal for high-frequency applications up to 4 GHz. Featuring a bayonet coupling type, matte tin termination finish, and polypropylene insulator material, it offers reliable performance in board and panel mounting configurations.
31-5431
Amphenol 31-5431 RF BNC Connector features 0.2 dB insertion loss, 50 ohm impedance, and 4 GHz max operating frequency. Ideal for panel mount applications with gold termination finish and bayonet coupling type. Suitable for board and panel mounting in RF systems requiring low VSWR.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved