Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIAXIAL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Manufacturer Series: 21-033840-001; DIN Conformance: NO;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Gateway Technologies
1+ parts
$6.000
100+ parts
1k+ parts
$5.339
10k+ parts
Singapore Electronics
$6.600
$6.137
$5.873
$5.609
Twinax & Triax Connectors 21-033840-001 attributes and parameters. Explore more Twinax & Triax Connectors devices from Amphenol
Body or Shell Style:
Connector Type:
Contact Gender:
DIN Conformance:
Filter Feature:
IEC Conformity:
MIL Conformity:
Manufacturer Series:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
21-033840-001 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
1N4148WS
Bytesonic Electronics
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
5056
Pomona Electronics
RF TRIAXIAL-BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Additional Features: ROHS COMPLIANT; Characteristic Impedance: 50 ohm;
BJ74-47
Cinch Connectivity Solutions
RF TWINAXIAL-BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: YES; Maximum Operating Frequency: .5 GHz; Shell Material: BRASS;
DK-621-0412-S
TE Connectivity
TE Connectivity's DK-621-0412-S is a threaded RF triaxial connector with max operating temp of 125°C. Ideal for applications requiring female solder termination, such as twinax & triax connections in cable and panel mounting setups at 115/230VAC mains rating.
014117-1002
Smiths Group Plc
014117-1002 by Smiths Group Plc is a RF TWINAXIAL CONNECTOR with BAYONET coupling, POLYTETRAFLUOROETHYLENE insulator, and 150 ohm impedance. It has a durability of 500 cycles and operates b/w -55 to 125 °C. Ideal for board mounting in applications requiring high insulation resistance and signal current up to 3A.
BJ459ACWP-201
Trompeter Electronics
RF TWINAXIAL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; IEC Conformity: NO; Termination Contact Finish: NICKEL;
M49142/03-0008
Kings Electronics
RF TRIAXIAL-BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: M49142/03; Insulator Material: POLYTETRAFLUOROETHYLENE; Additional Features: STANDARD: MIL-STD-348;
DK-621-0412-P
TE Connectivity's DK-621-0412-P RF triaxial connector features threaded coupling, solder termination, and a max operating temperature of 125°C. Ideal for applications requiring a male jack connector with cable and panel mounting, suitable for use in environments up to 115/230VAC.
CBBJR79A
RF TRIAXIAL-BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD:MIL-C-49142; Coupling Type: BAYONET; DIN Conformance: NO;
BJ77HS
BJ77HS by Cinch Connectivity Solutions is a RF triaxial-BNC connector with bayonet coupling, suitable for panel mounting. It features a polytetrafluoroethylene insulator and hermetic sealing, ideal for solder termination in board and panel applications. With a max operating frequency of 0.5 GHz, it ensures reliable connectivity in high-frequency environments.
PL75-7
PL75-7 by Cinch Connectivity Solutions is a RF triaxial-BNC connector with a characteristic impedance of 50 ohm. It features a bayonet coupling type and insulator material made of polytetrafluoroethylene, suitable for crimp termination on cables. This connector is ideal for applications requiring high-frequency signal transmission up to 0.5 GHz.
CJT-T-P-HH-ST-TH1
Samtec
CJT-T-P-HH-ST-TH1 by Samtec is a RF twinaxial connector with 100 ohm impedance, gold finish, and bayonet coupling. It is used in applications requiring a max operating frequency of 4 GHz, such as high-speed data transmission systems. The connector features a brass shell, PTFE insulator material, and solder termination for reliable performance in temperatures ranging from -20 to 105°C.
PL155AC-306
Bel Fuse
Bel Fuse PL155AC-306 is a RF triaxial connector with bayonet coupling, suitable for 0.5 GHz frequency. Featuring nickel finish, brass shell, and crimp termination, it is ideal for commercial applications requiring reliable coax connections on cables.
DK-621-0440-4S
TE Connectivity's DK-621-0440-4S is a RF triaxial connector with bayonet coupling, operating up to 125°C. It features solder termination, female contact gender, and jack body style for cable and panel mounting applications at 115/230VAC mains rating.
PL75-24
PL75-24 by Cinch Connectivity Solutions is a MIL-conformant RF twinaxial-BNC connector with bayonet coupling. It features crimp termination, male contact gender, and plug body style for cable mounting. Ideal for applications requiring straight mounting at a max operating frequency of 0.5 GHz.
31-224
Amphenol
Amphenol 31-224 RF Twinaxial Connector features a body diameter of 0.571", dielectric voltage of 2100VAC, and operating temperature range from -45 to 121°C. Ideal for applications requiring durable connectors with bayonet coupling, such as in telecommunications and military equipment.
PL155-47
Bel Fuse PL155-47 RF Twinaxial Connector features BAYONET coupling, 0.46" body diameter, and 0.828" body depth. Ideal for commercial applications at 0.5 GHz frequency, with BRASS shell material and CRIMP termination for cable mounting.
PL375-64
Bel Fuse PL375-64 RF triaxial-TNC connector features threaded coupling, nickel finish, and brass shell. With 0.5 GHz max operating frequency, it's ideal for commercial applications requiring reliable male coax contacts in straight plug style with crimp termination on cable mounts.
TGF-12B09-01SA
The Amphenol TGF-12B09-01SA is a threaded RF twinaxial-twinax connector with crimp termination. It features a female contact gender and plug body style, suitable for cable mounting in Twinax & Triax applications.
BJ77FL
RF TRIAXIAL-TNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Insulator Material: POLYTETRAFLUOROETHYLENE; Panel Mount: YES;
BJ79-32
RF TRIAXIAL-BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Characteristic Impedance: 50 ohm; Mating Contact Finish: NICKEL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved