Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 172223 N-Type Connector features threaded coupling, PTFE insulator, gold/silver termination, and 50 ohm impedance. Ideal for RF applications up to 11 GHz with VSWR of 1.3. Suitable for panel and cable mounting with female contact gender and jack body style.
Median Price
$23.692
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Master Electronics
1+ parts
$22.430
100+ parts
$20.300
1k+ parts
$19.870
10k+ parts
-
DigiKey
$78.582
Powell Electronics
$22.510
$16.080
Verical
$24.873
IBS Electronics
$30.476
$27.124
$26.619
Vyrian
VNN
Nova Conductors
EMSNET
Electronic Supply
Gateway Technologies
$8.000
$7.120
Singapore Electronics
$8.800
$8.184
$7.832
$7.480
Ampacity Inc.
$17.090
Andel Nordic
$25.520
$17.861
Netroflash
Continental Prestige Electronics
Argo Parts USA
This feature allows for easy and secure installation of the connector onto a panel, providing a durable and reliable connection.
The use of gold/silver finish on the termination contact enhances conductivity and corrosion resistance, ensuring optimal signal transmission.
Meeting MIL standards ensures that the connector is designed and manufactured to meet the stringent requirements for military applications, ensuring high reliability and performance.
The threaded coupling type provides a secure and stable connection, preventing accidental disconnection in high vibration environments.
The use of PTFE as insulator material provides excellent dielectric properties, low loss, and high temperature resistance, ensuring reliable performance in various conditions.
The RF N Connector is a widely used and standardized connector for RF applications, ensuring compatibility and interchangeability with other N-type connectors.
A lower VSWR value indicates better impedance matching and less signal reflection, leading to improved signal transmission efficiency.
Supports versatile mounting options on both cables and panels, providing flexibility in installation and use.
The 50 ohm characteristic impedance matches standard RF systems, ensuring optimal signal transfer and reducing signal loss.
The clamp termination type enables easy and secure attachment of the connector to the cable, ensuring a stable and reliable connection.
The female contact gender is commonly used for panel mount applications, ensuring compatibility with male connectors and enhancing versatility.
The jack body or shell style is commonly used for female connectors, providing a robust and reliable housing for the connector components.
The straight mounting style allows for easy and direct installation of the connector, suitable for applications where a straight connection is preferred.
Supports high-frequency applications up to 11 GHz, making it suitable for various RF communication and testing applications.
N-Type Connectors 172223 attributes and parameters. Explore more N-Type Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
Voltage Standing Wave Ratio:
172223 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
3020-00-731-1121, 3020007311121
NIIN
007311121
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Starsea Electronics
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
Hy Electronic
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
BSS138K-13
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
225389-6
TE Connectivity
TE Connectivity's 225389-6 N-Type Connector features gold termination, PTFE insulator, and brass shell. With 50 ohm impedance, it operates from -65 to 165°C and handles up to 11 GHz frequency. Ideal for RF applications requiring durability with a MIL standard conformity.
138-4449-007
Cinch Connectivity Solutions
RF N CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 3500VAC; Termination Type: CRIMP; Mounting Type: CABLE;
R161181000W
Radiall S A
R161181000W by Radiall S A is an RF N CONNECTOR with 0.33 dB Insertion Loss, 50 ohm Impedance, and POLYTETRAFLUOROETHYLENE Insulator. Ideal for applications requiring threaded coupling, right angle mounting, and crimp termination up to 11 GHz frequency.
138-4416-007
Vertiv
RF N CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 3500VAC; Cable Types: RG-213; Shell Material: BRASS; Maximum Operating Frequency: 11 GHz;
N1141A1-NT3G-1-50
Amphenol
Amphenol N1141A1-NT3G-1-50 is an RF N connector with threaded coupling, gold finish over nickel, and PTFE insulator. Ideal for cable mounting with clamp crimp termination, this male plug connector is commonly used in straight mounting applications.
R161.270.000
R161.270.000 N-Type Connector by Radiall S A features a body diameter of 0.748", insulation resistance of 5G ohm, and insertion loss of 0.17 dB. Ideal for RF applications with a characteristic impedance of 50 ohm, it is panel mountable and suitable for use in commercial settings up to 11 GHz frequency range.
1-1478420-0
TE Connectivity 1-1478420-0 is an N-Type RF connector with threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for applications requiring a male plug connector with solder termination, suitable for frequencies up to 11 GHz in cable mounting setups.
R161606000
The Radiall S A R161606000 is an RF N CONNECTOR with 50 ohm impedance and 0.17 dB insertion loss. Featuring a threaded coupling type, it is panel mountable and hermetic, suitable for applications up to 11 GHz frequency operation.
3031-7341-10
M/a-com Technology Solutions
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP SOLDER; Body or Shell Style: PLUG; Additional Features: APPLICABLE CABLES:RG 174/U; RG 179; RG 187; RG 188; RG 316; CAPTIVE CENTER CONTACT;
138-4696-011
RF N CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 3500VAC; Durability: 500 Cycles; Cable Types: RG-401;
172102
Amphenol 172102 is an N-Type Connector with threaded coupling, PTFE insulator, and brass shell. It has a VSWR of 1.3, impedance of 50 ohm, and operates up to 11 GHz. Ideal for commercial applications requiring reliable RF connections in cables like RG-393/U.
SF6545-6003
Sv Microwave
RF N CONNECTOR;
N1121A2-002-NT3G-7C-50
Amphenol N1121A2-002-NT3G-7C-50 is an RF N connector with threaded coupling, gold finish over nickel, and PTFE insulator. Ideal for cable mounting with male crimp termination, plug body style, and straight mounting.
172106
Amphenol 172106 N-Type Connector features gold termination, threaded coupling, and PTFE insulator. With 50 ohm impedance and 1.3 VSWR, it operates up to 11 GHz. Ideal for RF applications requiring reliable signal transmission in cable and panel setups.
23_N-50-0-1/133_NE
Huber+suhner Ag
23_N-50-0-1/133_NE by Huber+suhner Ag is an RF N CONNECTOR with a characteristic impedance of 50 ohm. It features a gold (Au) termination contact finish, PFA/PTFE insulator material, and brass shell material. Ideal for applications requiring durability up to 500 cycles, operating temperatures ranging from -65 to 165 °C, and a max frequency of 11 GHz.
172224-24
Amphenol 172224-24 is an N-Type RF connector with 0.736" body depth, PTFE insulator, and brass shell finish. Ideal for commercial applications, it features a jack-style body, straight mounting, coax contact style, and locking option for reliable connections.
TC-400-NMH-X
L-com
The L-com TC-400-NMH-X N-Type Connector features 0.12 dB insertion loss, 1.3 VSWR, and 50 ohm impedance for RF applications up to 6 GHz. Ideal for cable termination with threaded coupling and crimp solder termination, this connector is designed for high-frequency signal transmission.
R161022000W
R161022000W N-Type Connector by Radiall S A features 0.16 dB insertion loss, 1.2 VSWR, and 11 GHz max operating frequency. Ideal for RF applications requiring threaded coupling, this connector has a 50 ohm impedance and PTFE insulator for reliable performance in cable installations.
138-4404-007
RF N CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1050VAC; Total No. of Contacts: 1; Mounting Type: CABLE;
1057243-1
TE Connectivity's 1057243-1 N-Type Connector features a 0.825" body diameter and 50 ohm characteristic impedance. With TFE insulator material, it operates from -65 to 165°C, making it ideal for RF applications up to 11 GHz with RG-141/U cables.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
172224-13
The Amphenol 172224-13 is an N-Type RF connector with a brass shell and PTFE insulator. It features a female contact gender, coaxial contact style, and straight mounting style with locking option. Ideal for commercial applications requiring reliable signal transmission in various industries.
172220
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: JACK; Coupling Type: THREADED; Characteristic Impedance: 50 ohm;
172236
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; IEC Conformity: NO; Mounting Style: RIGHT ANGLE;
172224-22
RF N CONNECTOR; Reliability: COMMERCIAL; Body or Shell Style: JACK; Mounting Option-1: LOCKING; Mounting Style: STRAIGHT; Shell Material: BRASS;
172204
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD/SILVER; MIL Conformity: YES; Voltage Standing Wave Ratio: 1.3;
172260-10
RF N CONNECTOR; Reliability: COMMERCIAL; Body or Shell Style: PLUG; Contact Material: NOT SPECIFIED; No. of Ports: 1; Mounting Option-1: LOCKING;
172254
RF N CONNECTOR; Reliability: COMMERCIAL; Contact Style: COAX; Mounting Option-1: LOCKING; Body or Shell Style: JACK; Total No. of Contacts: 1;
172234
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD AND PANEL; Voltage Standing Wave Ratio: 1.3; Maximum Operating Frequency: 11 GHz;
172219
Amphenol 172219 is an N-Type Connector with MIL Conformity, threaded coupling, and PTFE insulator. Ideal for RF applications up to 11 GHz, it features a VSWR of 1.3, 50 ohm impedance, and right-angle mounting on cables using crimp termination.
RF N CONNECTOR; Reliability: COMMERCIAL; Total No. of Contacts: 1; Contact Style: COAX; Manufacturer Series: 172224-24; Shell Finish: BRASS;
172206
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: YES; DIN Conformance: NO; Manufacturer Series: 172206;
172209
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; Termination Type: CRIMP; Mounting Style: STRAIGHT;
172221
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD; Filter Feature: NO; Maximum Operating Frequency: 11 GHz;
172222
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: GOLD/SILVER; DIN Conformance: NO; MIL Conformity: YES;
172228
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD; MIL Conformity: NO; Panel Mount: YES;
172242
RF N CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Panel Mount: YES; MIL Conformity: YES;
172255
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: 172255; Maximum Operating Frequency: 11 GHz; Mounting Style: STRAIGHT;
172277
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Mounting Style: RIGHT ANGLE; Insulator Material: POLYTETRAFLUOROETHYLENE;
172290
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Voltage Standing Wave Ratio: 1.3; JESD-609 Code: e4; IEC Conformity: NO;
172239
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Characteristic Impedance: 50 ohm; IEC Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved