Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 172219 is an N-Type Connector with MIL Conformity, threaded coupling, and PTFE insulator. Ideal for RF applications up to 11 GHz, it features a VSWR of 1.3, 50 ohm impedance, and right-angle mounting on cables using crimp termination.
Median Price
$15.080
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Powell Electronics
1+ parts
$10.400
100+ parts
$8.210
1k+ parts
-
10k+ parts
Heilind Electronics
$10.889
$8.642
$8.507
Interstate Connecting
$11.243
$9.062
$8.799
Farnell
$12.150
$11.610
RS Americas
$13.510
$11.010
Mouser Electronics
$12.450
$10.560
TTI
$10.350
DigiKey
$17.390
$12.562
$11.214
Newark
$19.770
$14.730
$14.020
Element14
$19.890
$16.140
$14.950
RS (Exports)
$21.820
$16.800
Master Electronics
$13.240
$12.130
Verical
$15.576
Vyrian
VNN
Nova Conductors
Electro Sonic
$9.270
$9.130
Sunrise Surplus Inc.
SPM Sales
Eastern End Electronics, LLC
Inventory MP
Bristol Electronics
ACDS - Activité Composants Distribution Service
Quittner & Schimek s.r.o.
Prism Electronics
Ampacity Inc.
$8.860
Gateway Technologies
$9.264
$8.244
Singapore Electronics
$10.190
$9.476
$9.069
$8.661
Allen Electronics Distributors
$14.100
$11.030
Continental Prestige Electronics
$16.780
$13.260
Argo Parts USA
Authorized Procurement Solutions
Perfect Parts
Netroflash
Ensures that the connector meets military standards for reliability and performance, making it suitable for rugged environments and critical applications.
Threaded coupling provides a secure and reliable connection, reducing the risk of accidental disconnection in high vibration or harsh conditions.
PTFE insulator material offers excellent electrical properties and high temperature resistance, ensuring stable and efficient signal transmission.
Low VSWR of 1.3 indicates minimal signal reflection and efficient power transfer, resulting in high performance and minimal loss.
Cable mounting allows for easy installation and connection to RF cables, providing flexibility and convenience in various setups.
Standard 50 ohm impedance ensures compatibility with a wide range of RF equipment and minimizes signal loss for reliable and consistent performance.
Crimp termination offers a secure and reliable connection between the connector and cable, reducing signal loss and ensuring long-term durability.
Male connector allows for easy mating with female connectors, providing a reliable and secure connection for various RF applications.
Plug design offers a simple and compact form factor, making it suitable for space-constrained installations while ensuring reliable signal transmission.
Right angle mounting allows for space-efficient installation in tight or restricted spaces, providing flexibility in system design and layout.
Supports high-frequency applications up to 11 GHz, making it ideal for demanding RF systems and applications that require fast data transmission.
N-Type Connectors 172219 attributes and parameters. Explore more N-Type Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
Voltage Standing Wave Ratio:
172219 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
5895-14-361-1609, 5895143611609, 5950-00-833-6045, 5950008336045
NIIN
143611609, 008336045
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Vishay Telefunken
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Siemens
Formosa Microsemi
FDLL4148
National Semiconductor
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
82-5374
Amphenol
Amphenol 82-5374 N-Type Connector features 0.15 dB insertion loss, 3500VAC dielectric voltage, and 1.35 VSWR. Ideal for RF applications up to 11 GHz with RG-142/U cable termination in commercial settings.
082-4425-1003
Amphenol's 082-4425-1003 N-Type Connector features 0.15 dB insertion loss, GOLD termination contact finish, and threaded coupling type. Ideal for RF applications up to 11 GHz with 50 ohm impedance, male gender, and crimp termination on cables.
138-4449-007
Bel Fuse
Bel Fuse's 138-4449-007 N-Type Connector features 5000000000 ohm Insulation Resistance, 0.15 dB Insertion Loss, and 3500VAC Dielectric Withstanding Voltage. Ideal for RF applications with LMR400 cable type, it operates b/w -65 to 165 °C and supports up to 11 GHz frequency.
138-4694-011
Vertiv
RF N CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2100VAC; Maximum Operating Frequency: 18 GHz; Body or Shell Style: PLUG;
SPC13223
SPC TECHNOLOGY/ MULTICOMP
RF N CONNECTOR;
M39012/02-0503
Kings Electronics
M39012/02-0503 by Kings Electronics is an N-Type Connector with 0.15 dB Insertion Loss, 1.3 VSWR, and 11 GHz Operating Frequency. It is ideal for RF applications requiring threaded coupling, PTFE insulator, and 50 ohm impedance. Suitable for cable mounting with crimp termination, this connector features a female contact in a straight jack style.
172117
Amphenol 172117 N-Type Connector features 3500VAC Dielectric Withstanding Voltage, 1.3 VSWR, and 50 ohm Impedance. Ideal for RF applications up to 11 GHz with threaded coupling and gold contact finish for reliable signal transmission. Suitable for commercial use in panel mount configurations.
UG-536C/U
Delta Electronics Manufacturing
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e4; IEC Conformity: NO; MIL Conformity: NO;
11_N-50-3-5/133_NE
Huber+suhner Ag
Huber+suhner Ag's 11_N-50-3-5/133_NE is an RF N CONNECTOR with threaded coupling, gold over nickel finish, and 50 ohm impedance. Suitable for cables, it operates at a max frequency of 11 GHz. MIL and IEC conformity ensure high-quality performance in various applications.
R161.281.300
Radiall S A
R161.281.300 by Radiall S A is an N-Type Connector with 0.62" body diameter, 5000000000 ohm insulation resistance, and 0.17 dB insertion loss. Ideal for RF applications up to 11 GHz, it features a threaded coupling type, gold over nickel termination contact finish, and PTFE insulator material.
172137
Amphenol 172137 is an N-Type RF connector with threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for panel mount applications up to 11 GHz frequency range. Features crimp solder termination, female contact gender, and jack body style for reliable connections in various setups.
M39012/02-0101
The Delta Electronics M39012/02-0101 N-Type Connector features threaded coupling, gold termination finish, and 50 ohm impedance. Ideal for RF applications up to 11 GHz, this connector is MIL compliant and uses PTFE insulator material. Suitable for cable mounting with female contact gender.
23_N-50-0-1/133_NE
23_N-50-0-1/133_NE by Huber+suhner Ag is an RF N CONNECTOR with a characteristic impedance of 50 ohm. It features a gold (Au) termination contact finish, PFA/PTFE insulator material, and brass shell material. Ideal for applications requiring durability up to 500 cycles, operating temperatures ranging from -65 to 165 °C, and a max frequency of 11 GHz.
R161083000
R161083000 by Radiall S A is an RF N CONNECTOR with 0.17 dB Insertion Loss, 1.2 VSWR, and 50 ohm Impedance. It features GOLD OVER NICKEL Termination for high performance in applications up to 11 GHz frequency, making it ideal for CABLE mounting in various RF systems requiring threaded coupling.
172220
Amphenol 172220 is an N-Type Connector with threaded coupling, gold/silver finish, and PTFE insulator. It has a VSWR of 1.3, operates up to 11 GHz, and has a characteristic impedance of 50 ohm. Ideal for RF applications requiring reliable signal transmission in high-frequency environments.
R161.004.000
Radiall S A R161.004.000 N-Type Connector features 0.17 dB insertion loss, 1.2 VSWR, and 11 GHz max operating frequency. Ideal for RF applications requiring threaded coupling, gold over nickel termination, and 50 ohm impedance on cables.
082-4425
Amphenol 082-4425 is an N-Type Connector with 0.15 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 11 GHz, it features a 50 ohm Characteristic Impedance and POLYTETRAFLUOROETHYLENE Insulator Material. Suitable for cable mounting with CRIMP termination, this MALE connector offers low VSWR of 1.3.
082-202-1006
Amphenol's 082-202-1006 N-Type Connector features 0.15 dB insertion loss, gold termination contact finish, and threaded coupling type. Ideal for RF applications up to 11 GHz with a characteristic impedance of 50 ohm. Suitable for cable mounting with clamp solder termination.
172180
Amphenol 172180 N-Type Connector features threaded coupling, gold contact finish, and PTFE insulator. With 50 ohm impedance and 1.3 VSWR, it operates up to 11 GHz. Ideal for RF applications requiring a male plug with right-angle mounting on cables terminated via crimping.
EZ-400-NMH-X
Times Microwave Systems
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Filter Feature: NO; Characteristic Impedance: 50 ohm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
172224-13
The Amphenol 172224-13 is an N-Type RF connector with a brass shell and PTFE insulator. It features a female contact gender, coaxial contact style, and straight mounting style with locking option. Ideal for commercial applications requiring reliable signal transmission in various industries.
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: JACK; Coupling Type: THREADED; Characteristic Impedance: 50 ohm;
172236
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; IEC Conformity: NO; Mounting Style: RIGHT ANGLE;
172224-22
RF N CONNECTOR; Reliability: COMMERCIAL; Body or Shell Style: JACK; Mounting Option-1: LOCKING; Mounting Style: STRAIGHT; Shell Material: BRASS;
172204
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD/SILVER; MIL Conformity: YES; Voltage Standing Wave Ratio: 1.3;
172260-10
RF N CONNECTOR; Reliability: COMMERCIAL; Body or Shell Style: PLUG; Contact Material: NOT SPECIFIED; No. of Ports: 1; Mounting Option-1: LOCKING;
172254
RF N CONNECTOR; Reliability: COMMERCIAL; Contact Style: COAX; Mounting Option-1: LOCKING; Body or Shell Style: JACK; Total No. of Contacts: 1;
172234
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD AND PANEL; Voltage Standing Wave Ratio: 1.3; Maximum Operating Frequency: 11 GHz;
172224-24
RF N CONNECTOR; Reliability: COMMERCIAL; Total No. of Contacts: 1; Contact Style: COAX; Manufacturer Series: 172224-24; Shell Finish: BRASS;
172206
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: YES; DIN Conformance: NO; Manufacturer Series: 172206;
172223
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Voltage Standing Wave Ratio: 1.3; Body or Shell Style: JACK; Contact Material: NOT SPECIFIED;
172211
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Characteristic Impedance: 50 ohm; JESD-609 Code: e4; Insulator Material: POLYTETRAFLUOROETHYLENE;
172214
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Insulator Material: POLYTETRAFLUOROETHYLENE; Voltage Standing Wave Ratio: 1.3;
172215
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Mating Contact Finish: NOT SPECIFIED; Voltage Standing Wave Ratio: 1.3;
172216
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-C-39012, CAPTIVE CONTACT; Panel Mount: NO; Manufacturer Series: 172216;
172217
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-C-39012, CAPTIVE CONTACT; Filter Feature: NO; Mating Contact Finish: GOLD/SILVER;
172218
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; Mounting Style: STRAIGHT; Additional Features: STANDARD: MIL-C-39012;
172237
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Termination Contact Finish: GOLD/SILVER; Additional Features: STANDARD: MIL-C-39012;
172255
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: 172255; Maximum Operating Frequency: 11 GHz; Mounting Style: STRAIGHT;
172283
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; IEC Conformity: NO; Insulator Material: POLYTETRAFLUOROETHYLENE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved