Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF N CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Cable Types: RG-316/U; DIN Conformance: NO;
Median Price
$10.829
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
< 1k
Mouser Electronics
1+ parts
$14.300
100+ parts
$10.550
1k+ parts
$9.390
10k+ parts
-
Powell Electronics
$7.280
$5.580
Verical
$10.244
First Choice Components Inc.
IBS Electronics
$10.920
$9.711
EMSNET
American Connector Supply Corp
SPM Sales
Inventory MP
Bristol Electronics
Microwave Components, LLC
Gateway Technologies
$8.000
$7.120
Singapore Electronics
$8.800
$8.184
$7.832
$7.480
Perfect Parts
N-Type Connectors 172165 attributes and parameters. Explore more N-Type Connectors devices from Amphenol
Additional Features:
Body Depth:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Option:
Panel Mount:
Reliability:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
172165 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
1430-99-730-3255, 1430997303255, 5305-14-270-8761, 5305142708761
NIIN
997303255, 142708761
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
Hitano Enterprise
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
Semitronics
R161004000
Radiall S A
R161004000 by Radiall S A is an N-Type Connector with 0.17 dB Insertion Loss, 1.2 VSWR, and 50 ohm Impedance. It is used for RF applications up to 11 GHz, featuring Gold/Nickel termination, PTFE insulator, threaded coupling, male contact gender, plug body style, and cable mounting.
M39012/02-0513
Winchester Interconnect
M39012/02-0513 by Winchester Interconnect is an N-Type RF connector with gold-plated contacts, suitable for 50 ohm systems up to 11 GHz. It features a threaded coupling, PTFE insulator, and brass shell with nickel finish. Ideal for military applications due to MIL-C-39012 conformity and reliable crimp termination.
82-368
Amphenol
The Amphenol 82-368 N-Type Connector features a 0.625" body diameter, 0.15 dB insertion loss, and 1.3 VSWR. Ideal for RF applications up to 11 GHz, this panel-mount connector has a threaded coupling type and is made of brass with PTFE insulator for durability in commercial settings.
172236
Amphenol 172236 is an N-Type RF connector with threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for applications up to 11 GHz, it features a VSWR of 1.3 and solder termination. Commonly used in cable assemblies requiring right-angle mounting for male plug connectors.
082-5375-RFX
Amphenol 082-5375-RFX is an N-Type Connector with 0.827" body diameter, 5000000000 ohm insulation resistance, and 0.15 dB insertion loss. Ideal for RF applications up to 11 GHz, it features gold termination contact finish, PTFE insulator material, and a threaded coupling type.
172133-11
Amphenol 172133-11 is an RF N connector with gold shell finish and PTFE insulator. It is a male plug connector for commercial applications, featuring brass shell material and solder termination. Ideal for panel mounting in straight configuration, offering reliable coaxial connection with locking option.
EZ-240-NMH-RA-X
Times Microwave Systems
EZ-240-NMH-RA-X by Times Microwave Systems is an RF N connector with 50 ohm impedance, gold termination finish, and 1.35 VSWR. Ideal for LMR240 cables, it operates from -55 to 125°C, withstands up to 1000VAC, and offers low insertion loss of -0.245 dB for applications requiring durability and high frequency performance up to 6 GHz.
EZ-240-NMH-X
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: BERYLLIUM COPPER; JESD-609 Code: e4; Filter Feature: NO;
R161.606.000
R161.606.000 by Radiall S A is an RF N CONNECTOR with 50 ohm impedance, POLYTETRAFLUOROETHYLENE insulator, and FEMALE contact gender. It is panel mountable and threaded for secure coupling, suitable for applications up to 11 GHz frequency in various industries.
J01020A0149
Telegartner Karl Gartner
Telegartner Karl Gartner's J01020A0149 N-Type Connector features 0.1 dB insertion loss, 1.06 VSWR, and 50 ohm impedance. Ideal for RF applications up to 11 GHz, it is a threaded waterproof connector with copper-silver contacts for reliable performance in various environments.
082-4427
Amphenol's 082-4427 N-Type Connector features 0.15 dB insertion loss, GOLD termination, and threaded coupling. Ideal for RF applications up to 11 GHz with 50 ohm impedance, male contact gender, and crimp termination on cables.
3052-1201-10
M/a-com Technology Solutions
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: GOLD (100); Mating Contact Finish: GOLD (100); Insulator Material: POLYTETRAFLUOROETHYLENE;
172129-10
Amphenol 172129-10 N-Type Connector features threaded coupling, 0.672" body depth, and PTFE insulator. Ideal for RF applications up to 2.5 GHz with RG-316/U cable termination. Commercially reliable connector suitable for panel mounting in various industries.
R161022000
Radiall S A R161022000 is an N-Type Connector with 0.17 dB Insertion Loss, 1.2 VSWR, and 50 ohm Impedance. Ideal for RF applications up to 11 GHz, featuring GOLD OVER NICKEL Termination and POLYTETRAFLUOROETHYLENE Insulator for reliable performance in cable installations.
R161.020.000
R161.020.000 by Radiall S A is an RF N CONNECTOR with 50 ohm impedance, 0.17 dB insertion loss, and 1.2 VSWR. It is used in applications requiring threaded coupling, GOLD OVER NICKEL finish, and POLYTETRAFLUOROETHYLENE insulator material for durability up to 500 cycles at temperatures ranging from -55 to 155 °C.
11_N-50-3-5/133_NE
Huber+suhner Ag
Huber+suhner Ag's 11_N-50-3-5/133_NE is an RF N CONNECTOR with threaded coupling, gold over nickel finish, and 50 ohm impedance. Suitable for cables, it operates at a max frequency of 11 GHz. MIL and IEC conformity ensure high-quality performance in various applications.
TC-400-NMH-RA-D
L-com
The L-com TC-400-NMH-RA-D is an N-Type RF connector with threaded coupling, PTFE insulator, 50 ohm impedance, and 1.25 VSWR. Ideal for applications up to 11 GHz, it features a right-angle plug design for cable termination using crimp solder method. Suitable for high-frequency communication systems requiring secure locking connections.
M39012/01-0503
Delta Electronics Manufacturing
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Coupling Type: THREADED; Mating Contact Finish: NOT SPECIFIED;
Kings Electronics
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 11 GHz; Additional Features: STANDARD:MIL-PRF-39012, APPLICABLE CABLES:RG142A/U; RG142/U; RG-223/U, INSERTION LOSS MAX AT 9 GHZ; MIL Conformity: YES;
R161082120
R161082120 by Radiall S A is an RF N CONNECTOR with 50 ohm impedance, POLYTETRAFLUOROETHYLENE insulator, and BRASS shell. It operates b/w -55 to 155 °C, has 500M ohm insulation resistance, and can withstand up to 11 GHz frequency. Ideal for commercial applications requiring durable connectors with crimp termination on cables.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved