Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
WIRE AND CABLE; Rated Voltage: 300 V; Rated Current: 1.3 A; Shielding: YES; Conductor Material: TINNED COPPER; Jacket Material: POLYVINYL CHLORIDE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Bristol Electronics
1+ parts
100+ parts
1k+ parts
10k+ parts
Gateway Technologies
$2.000
$1.780
Singapore Electronics
$2.200
$2.046
$1.958
$1.870
Electrical Wires & Cables 159-2832-016 attributes and parameters. Explore more Electrical Wires & Cables devices from Amphenol
Additional Features:
Approvals (V):
Conductor Material:
Connector Accessory Type:
Construction:
Diameter:
Insulator Material:
Jacket Material:
No. of Conductors:
Maximum Operating Temperature:
Rated Current:
Rated Voltage:
Shielding:
Stranding:
Wire Gauge (AWG):
Wire & Cable Name:
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
1N4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
Rectron
ERJ2RKF1002X
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DS18B20U
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
15022
Helukabel
Helukabel 15022 is a CE, EAC, IPA, VDE approved control cable with PVC jacket and insulation. Featuring stranded construction, it has 5 bare copper conductors with 0.75 mm2 cross-section area. Ideal for flexible use in medium mechanical stresses at temperatures ranging from -40 to 80 °C.
13250
The Helukabel 13250 is a stranded electrical wire with polymer jacket, rated for 600V. It has approvals from BS, CUL, DIN, IEC, UL, VDE and is suitable for fixed installations. With a conductor material of bare copper and operating temperatures ranging from -40 to 80 °C, it is ideal for various applications requiring flexibility and durability.
1110145000
Molex
Molex 1110145000 cable is shielded with 5 conductors, USB MINI-B PLUG connectors on both sides. Operating temp: -40 to 85°C. Length: 430.7mm. Ideal for electrical connections in various applications.
FFSD-05-D-06.00-01-N
Samtec
Samtec's FFSD-05-D-06.00-01-N is a UL-approved stranded flat cable with 30 AWG, PVC insulation, and tin finish. Ideal for high reliability applications, it has a cross-section area of 0.0509 mm2, rated current of 2.3 A, and operates b/w -40 to 105°C.
M22759/32-16-9
Defense Logistics Agency
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Insulator Material: CROSSLINKED EXTRUDED MODIFIED ETFE; Conductor Material: COPPER; Resistance: .016 ohm;
3206-5
Weico Wire & Cable
Weico Wire & Cable 3206-5 is a CSA/UL approved stranded wire with tinned copper conductor. With a rated voltage of 600V, it has PVC insulation and operates b/w -40°C to 105°C. This flexible cord and fixture wire in AWG 6 gauge is ideal for electrical applications requiring durability and flexibility.
1496476-1
TE Connectivity
CABLE ASSEMBLY; Connector Side-1: USB A; Connector Side-2: MINI USB B; Shielding: YES; DIN Conformity: NO; IEC Conformity: NO;
923345-01-C
3m Electronic Products Division
3m Electronic Products Division's 923345-01-C is a SOLID wire with AWG 22 gauge, 0.326 mm2 cross section area, and tinned copper conductor. Ideal for flexible cord and fixture wire applications due to its 1X22 stranding and 0.003 mm length.
115101-30-18.00
Amphenol
CABLE ASSEMBLY;
M16878/4BJE-9
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; MIL Conformity: YES; No. of Conductors: 1; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE;
PXP6040/B/3M00
Bulgin
The Bulgin PXP6040/B/3M00 is a UL-approved communication cable with PVC jacket, 4 conductors, and USB A male to USB B male connectors. It has a rated voltage of 30V, current of 1A, and operates b/w 0-70°C. Ideal for various electrical applications requiring reliable data transmission over short distances.
24221
Helukabel 24221 is a CE, DIN, EAC, EN, VDE approved CONTROL CABLE with 12 STRANDED copper alloy conductors. It has a rated voltage of 300V and can operate in temperatures ranging from -40 to 80°C. Ideal for installation in dry, moist, and wet environments due to its THERMOPLASTIC ELASTOMER jacket material.
3754/30300
WIRE AND CABLE;
6XV1830-0EH10
Siemens
Siemens 6XV1830-0EH10 cable is a stranded PVC wire with CE, CUL, ETL, UL approvals. It features tin finish copper conductors, PE insulation, and shielding for 100V applications. Ideal for fast installations in temperatures ranging from -40 to 75°C.
FFSD-20-D-12.00-01-N
Samtec's FFSD-20-D-12.00-01-N is a UL-approved stranded flat cable with tin finish, PVC insulation, and 7X38 stranding. It operates b/w -40 to 105°C, has 40 conductors of AWG 30 wire gauge, and a cross-section area of 0.0509 mm2. Ideal for high-reliability applications requiring a rated current of 2.3A.
44A0111-20-2L
TE Connectivity's 44A0111-20-2L wire is a flexible cord with 600V rating, TIN finish, and copper alloy conductor. With -65 to 150 °C operating range, it's ideal for electrical applications requiring durable wires in various environments.
55A0111-22-94
TE Connectivity's 55A0111-22-94 cable is a stranded wire with tin finish, rated at 600V. With a conductor made of copper alloy and a max operating temperature of 150°C, it is suitable for general purpose and lightweight applications. This flexible cord and fixture wire has a diameter of 1.09mm, stranding of 19X34, and is categorized under SPEC 55 cables.
RPCU-G-00.25-AMS-AM
Wires and Cables;
M22759/43-24-9
Allied Wire & Cable
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Conductor Material: COPPER; Maximum Operating Temperature: 200 Cel; Insulator Material: ETFE;
2273125-4
TE Connectivity's 2273125-4 is a 22 AWG communication cable with a rated voltage of 24V and max operating temp of 80°C. Ideal for applications requiring a durable cable with a current rating of 4A, such as in industrial automation systems or electronic control units.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved