Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 142210 is a RF SMB Connector with gold finish, snap coupling, and PTFE insulator. It has 50 ohm impedance, solder termination, and female contact gender. Ideal for board and panel mounting in applications requiring reliable RF connections.
Median Price
$5.440
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Arrow
1+ parts
$5.098
100+ parts
$3.940
1k+ parts
$3.621
10k+ parts
-
Heilind Electronics
$5.260
$4.242
$4.109
Newark
$4.280
$4.220
Interstate Connecting
$5.593
$4.646
$4.377
Avnet
$5.649
$4.191
$3.775
Farnell
$5.810
$4.900
Mouser Electronics
$6.940
$5.980
$4.590
DigiKey
$7.280
$5.258
$4.470
Element14
$9.730
$7.260
$6.240
Encitech
$38.460
TTI Europe
$4.706
$4.031
Master Electronics
$4.030
$3.820
$3.810
Verical
$5.080
$4.978
Chip1Stop
$4.980
Powell Electronics
$5.290
$4.060
Bristol Electronics
$6.726
$3.363
VNN
Electro Sonic
$4.080
$3.800
$3.740
Semtec, LLC
Nova Conductors
IBS Electronics
$6.171
$4.993
$4.951
American Microsemiconductor Inc.
Sensible Micro Corp
Prism Electronics
Ampacity Inc.
$3.290
Advanced Electronics
$3.570
$3.249
$2.927
Gateway Technologies
$6.000
$5.339
Singapore Electronics
$6.600
$6.137
$5.873
$5.609
Andel Nordic
$58.870
$41.210
Argo Parts USA
Continental Prestige Electronics
Netroflash
Perfect Parts
Convenient for easy installation and secure connection on panels or surfaces.
Gold finish provides a high conductivity connection and prevents oxidation, ensuring long-term reliability.
Snap coupling design allows for quick and easy mating and unmating of connectors, ideal for applications requiring frequent connections and disconnections.
Polytetrafluoroethylene (PTFE) provides excellent electrical properties, high temperature resistance, and ensures stable performance in various environments.
RF SMB connectors are commonly used in telecommunications and RF applications due to their compact size, ease of use, and reliable performance.
Versatile mounting options allow for use in a variety of configurations and applications, providing flexibility in installation.
Standard 50 ohm impedance ensures compatibility with a wide range of RF equipment and systems, reducing signal loss and interference.
Solder termination offers a secure and durable connection, suitable for applications where vibration or mechanical stress may occur.
Female gender connectors are commonly used as receptacles, providing a reliable and secure connection for mating with male connectors.
Receptacle style connectors offer a protective housing for the contacts, ensuring proper alignment and preventing damage during mating and unmating.
Straight mounting style allows for easy cable routing and connection in a linear configuration, suitable for a wide range of applications.
SSMB Connectors 142210 attributes and parameters. Explore more SSMB Connectors devices from Amphenol
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mounting Style:
Mounting Type:
Option:
Panel Mount:
Termination Type:
142210 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
1015-99-964-3753, 1015999643753, 1560-00-148-3271, 1560001483271, 3110-15-070-1484, 3110150701484, 4820-21-680-0060, 4820216800060, 5815-00-076-9223, 5815000769223, 5970-14-284-4665, 5970142844665, 5998-01-276-7146, 5998012767146
NIIN
999643753, 001483271, 150701484, 216800060, 000769223, 142844665, 012767146
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148WS
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Standard
1N4148
Semitronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
Plessey Semiconductors Discrete Components Div
Other Transistors;
Microsemi
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
142321
Amphenol
The Amphenol 142321 is an RF SMB connector with a gold shell finish and PTFE insulator. It is a female coax plug suitable for semi-rigid cables, solder termination, and panel mounting. This commercial-grade connector offers reliable performance in various applications requiring secure locking connections.
2009-7511-000
Radiall S A
Radiall S A 2009-7511-000 SSMB Connector features 0.3 dB Insertion Loss, GOLD OVER NICKEL Termination, and POLYTETRAFLUOROETHYLENE Insulator. Ideal for RF applications up to 4 GHz with 75 ohm impedance. Suitable for commercial use in board mounting configurations.
131-3701-811
Bel Fuse
Bel Fuse's 131-3701-811 RF SMB Connector features a dielectric voltage of 1400VAC, 50 ohm impedance, and male contact gender. With durability of 500 cycles, it is ideal for commercial applications requiring a max frequency of 4 GHz in temperatures ranging from -65 to 165°C.
B51-328-9019AU0
Itt Cannon
B51-328-9019AU0 by ITT Cannon is an RF SMB Connector with 50 ohm impedance, 0.25 dB insertion loss, and gold termination contact finish. Ideal for applications requiring MIL conformity, this snap-coupling connector features a right-angle mounting style and operates up to 4 GHz frequency.
R114.186.000
The Radiall S A R114.186.000 SSMB Connector features 1 dB insertion loss, 1000VAC dielectric voltage, and 50 ohm impedance for RF applications up to 4 GHz. With a gold over nickel finish and PTFE insulator, it is ideal for commercial use in cables with RG-179 type connectors requiring male contact gender and crimp termination. Operating temperatures range from -65 to 165°C with durability of 500 cycles.
73100-0157
Molex
Molex 73100-0157 is an RF SMB connector with a characteristic impedance of 75 ohm and max operating frequency of 4 GHz. It features a SNAP coupling type, POLYTETRAFLUOROETHYLENE insulator material, and is ideal for board mounting applications requiring low Voltage Standing Wave Ratio.
R114.665.000W
R114.665.000W by Radiall S A is a RF SMB connector with gold over nickel termination, PTFE insulator, and 50 ohm impedance. It is panel mountable and suitable for applications requiring high durability, such as in commercial settings up to 4 GHz frequency range. Withstanding voltage of 1000VAC and operating temperatures from -65 to 165 °C make it versatile for various environments.
73100-0097
Molex 73100-0097 SSMB Connector features 0.6 dB insertion loss, 1.43 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz with right-angle mounting on boards.
413990-1
TE Connectivity
TE Connectivity 413990-1 is a SSMB Connector with 0.25" body length, 1000000000 ohm insulation resistance, and 0.3 dB insertion loss. Ideal for RF applications up to 4 GHz, it features POLYTETRAFLUOROETHYLENE insulator material and BRASS shell material for durability.
R114.082.000
Radiall S A's R114.082.000 is a RF SMB Connector with 50 ohm impedance, 0.5 dB insertion loss, and 1.41 VSWR. Ideal for applications requiring high durability, it features gold-plated contacts, PTFE insulator, and operates b/w -65 to 165 °C at frequencies up to 4 GHz.
1-2345654-2
TE Connectivity 1-2345654-2 is a SSMB Connector with dimensions 1.079" x 0.386" x 0.655". It has PBT-POLYESTER insulator, operates b/w -40 to 125°C, and features SMB connector type for cable mounting. Ideal for applications requiring polarized female connectors at 115/230VAC rating.
FA1-NZSP-C01-0
FA1-NZSP-C01-0 by Amphenol is an RF SMB connector with a nickel shell finish, suitable for RG-174/U cable termination. Its brass shell and PTFE insulator make it ideal for commercial applications requiring reliable female coax connections. The crimp termination and straight plug design offer secure locking mounting options.
R114163000
Radiall S A R114163000 SSMB Connector with gold-plated contacts, 50 ohm impedance, and 1.25 VSWR is ideal for RF applications up to 4 GHz. Features snap coupling, PTFE insulator, and MIL/IEC conformity. Suitable for cable mounting with female contact gender in a right-angle plug design.
131-3701-261
Vertiv
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Coupling Type: SNAP;
82_SMB-50-0-17/111_NH
Huber+suhner Ag
82_SMB-50-0-17/111_NH by Huber+suhner Ag is an RF SMB CONNECTOR with characteristic impedance of 50 ohm, suitable for applications up to 4 GHz. It features GOLD OVER NICKEL finish, SNAP coupling type, and PERFLUOROALKOXY/POLYTETRAFLUOROETHYLENE insulator material, making it MIL and IEC conformant. Ideal for board mounting in various electronic systems requiring reliable signal transmission.
131-3303-501
Johnson Components
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: APPLICABLE CABLES: RG 161/U; RG 174, CAPTIVE CONTACT, INSERTION LOSS MAX AT 1.5 GHZ; Insulator Material: POLYTETRAFLUOROETHYLENE; Characteristic Impedance: 50 ohm;
R114.665.000
Radiall S A R114.665.000 is a RF SMB Connector with 50 ohm impedance, gold-plated contacts, and PTFE insulator for high durability. Ideal for applications requiring panel mounting, withstanding voltage up to 1400VAC, and operating temperatures from -65 to 165°C.
5415006-1
TE Connectivity 5415006-1 is an RF SMB connector with 50 ohm impedance, 0.3 dB insertion loss, and 1.25 VSWR. Ideal for commercial applications, it has a durability of 500 cycles and operates b/w -65 to 165°C.
Tyco Electronics Amp
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Mounting Style: STRAIGHT; Mating Contact Finish: GOLD;
414002-2
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Mounting Type: CABLE; Voltage Standing Wave Ratio: 1.51;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
142212
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Mounting Type: CABLE; Characteristic Impedance: 50 ohm;
142252
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: JACK; JESD-609 Code: e4; Termination Contact Finish: GOLD;
142210-10
RF SMB CONNECTOR; Reliability: COMMERCIAL; Contact Style: COAX; Terminal Length: .155 inch; Total No. of Contacts: 1; No. of Ports: 1;
142202
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; JESD-609 Code: e4; Filter Feature: NO;
142204
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Ports: 1; IEC Conformity: NO;
142206
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Body or Shell Style: PLUG; Mounting Style: RIGHT ANGLE;
142208
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; JESD-609 Code: e4; Mounting Type: CABLE;
142215
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: PLUG; Mating Contact Finish: GOLD; MIL Conformity: NO;
142219
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; IEC Conformity: NO; Body or Shell Style: PLUG;
142229
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: SNAP; IEC Conformity: NO; Panel Mount: NO;
142231
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: GOLD; Termination Type: CRIMP; MIL Conformity: NO;
142241
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Manufacturer Series: 142241; Insulator Material: POLYTETRAFLUOROETHYLENE;
142253
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; MIL Conformity: NO; Panel Mount: NO;
142254
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Cable Types: RG-58/U; Body or Shell Style: PLUG;
142255
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; IEC Conformity: NO; MIL Conformity: NO;
142284
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e4; Termination Type: CRIMP SOLDER; DIN Conformance: NO;
142285
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: SNAP; IEC Conformity: NO; Manufacturer Series: 142285;
142289
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: PLUG; Termination Contact Finish: GOLD; Panel Mount: NO;
142291
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Filter Feature: NO; Mounting Style: STRAIGHT;
142230
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Mounting Style: STRAIGHT; Additional Features: APPPLICABLE CABLES: RG 178B/U, RG 196A/U;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved