Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Shell Finish: GOLD; Mounting Style: STRAIGHT;
Median Price
$12.530
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Powell Electronics
1+ parts
-
100+ parts
1k+ parts
$9.270
10k+ parts
Gateway Technologies
$10.170
$9.051
Singapore Electronics
$11.187
$10.403
$9.956
$9.508
SSMA Connectors 132422RP-10 attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Contact Gender:
Contact Style:
Dielectric Withstanding Voltage (V):
Durability:
Insulator Material:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Total No. of Contacts:
Voltage Standing Wave Ratio:
132422RP-10 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
132357-11
Amphenol
Amphenol 132357-11 is a SSMA connector with dimensions of 0.375" x 0.312" x 0.562". With a dielectric voltage of 1400VAC, it has a characteristic impedance of 50 ohm and operates up to 18 GHz. Ideal for RF applications, this gold-finished connector offers durability with 500 cycles and surface mount termination in commercial settings.
16_SMA-50-2-43/133_NE
Huber+suhner Ag
16_SMA-50-2-43/133_NE by Huber+suhner Ag is a threaded RF SMA connector with 50 ohm impedance, gold over nickel finish, and brass shell. It operates b/w -65 to 165 °C, suitable for applications requiring durability of 500 cycles at up to 18 GHz frequency. Compatible with cable types EZ_86_TP_M17, SUCOFORM_86, MULTIFLEX_86 for solder termination in male plug configuration.
1045477-1
TE Connectivity's 1045477-1 SSMA Connector features Insulation Resistance of 5x10^9 ohm, Insertion Loss of 0.04 dB, and Coupling Type: THREADED. Ideal for RF applications with a max operating frequency of 38 GHz, it is designed for use in commercial settings with a characteristic impedance of 50 ohm.
73251-0112
Molex
The Molex 73251-0112 is an RF SMA connector with POLYTETRAFLUOROETHYLENE insulator, STAINLESS STEEL shell, and RG-55 cable type. It is a male plug connector terminated by crimping for commercial applications requiring reliable coaxial connections.
142-0701-411
Bel Fuse
Bel Fuse's 142-0701-411 SSMA Connector features 5000000000 ohm Insulation Resistance, 1400VAC Dielectric Withstanding Voltage, and -65 to 165 °C Operating Temperature. Ideal for RF applications up to 18 GHz, this connector offers durability with 500 Cycles and a Female Contact Gender.
16_SMA-50-2-53/119_NH
16_SMA-50-2-53/119_NH by Huber+suhner Ag is an RF SMA connector with gold-plated nickel finish, suitable for commercial applications. With a characteristic impedance of 50 ohm and max operating frequency of 18 GHz, it offers durability up to 500 cycles. This threaded coupling type connector has a temperature range from -65°C to 165°C, making it ideal for various RF cable mounting setups.
901-9877-RFX
Amphenol 901-9877-RFX is an RF SMA connector with 0.25 dB insertion loss, 1.51 VSWR, and 18 GHz max operating frequency. It features threaded coupling, gold termination contact finish, and PTFE insulator material. Ideal for applications requiring a 50 ohm characteristic impedance such as cable mounting in high-frequency environments.
132275
Amphenol 132275 is an RF SMA connector with threaded coupling, gold finish, and 50 ohm impedance. Ideal for panel mount applications, it features a right angle mounting style and solder termination for female contacts. Made of polytetrafluoroethylene, it ensures reliable signal transmission in various electronic devices.
M39012/56-3107
Winchester Interconnect
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Ports: 1; Panel Mount: NO; Body Depth: .7 inch;
M39012/94-3001
TE Connectivity's M39012/94-3001 is an RF SMA connector with 50 ohm impedance, gold-plated beryllium copper contacts, and a threaded coupling type. With a dielectric voltage of 1000VAC, it operates from -65 to 105°C and has a durability of 500 cycles. Ideal for commercial applications requiring high insulation resistance and reliable signal transmission up to 18 GHz.
112-900-0631N
RF SMA CONNECTOR; Manufacturer Series: 112-900-0631N;
R125464270
Radiall S A
Radiall S A's R125464270 is a RF SMA Connector with 50 ohm impedance, 0.296 dB insertion loss, and 1.16 VSWR. Ideal for applications up to 18 GHz, it features gold termination on a PTFE insulator in a panel mount receptacle design.
2921-61674
Sv Microwave
RF SMA CONNECTOR;
142-0403-011
Bel Fuse's 142-0403-011 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.06 dB Insertion Loss, and 1050VAC Dielectric Withstanding Voltage. Ideal for RF applications up to 12.4 GHz with RG-316 cable type, this connector offers reliable performance in commercial settings.
BJ72
Trompeter Electronics
RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Type: PANEL; Total No. of Contacts: 1; Additional Features: ROHS COMPLIANT;
132173
Amphenol 132173 is an SSMA connector with a threaded coupling type. It has a max operating frequency of 12.4 GHz and can withstand temperatures from -65 to 165 °C. This plug-style connector is commonly used in RF applications requiring a durable, high-frequency connection.
901-9893-RFX
Amphenol's 901-9893-RFX SSMA Connector features 0.13 dB insertion loss, 50 ohm impedance, and 18 GHz operating frequency. Ideal for RF applications requiring threaded coupling, gold termination finish, and PTFE insulator material in panel mount configurations.
2950-6081
2950-6081 by Sv Microwave is an RF SMA connector with a characteristic impedance of 50 ohm and max operating frequency of 18 GHz. It features a dielectric withstand voltage of 1400VAC, insulation resistance of 5Gohm, and operates in temperatures ranging from -65 to 165 °C. Ideal for panel mounting applications requiring durable connectors with gold shell finish.
5205-2
Connecting Devices
RF SMA CONNECTOR; Contact Gender: MALE; JESD-609 Code: e4; Manufacturer Series: SMA; Filter Feature: NO; Termination Contact Finish: GOLD (50);
M39012/94-3003
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: M39012/94; Mating Contact Finish: NOT SPECIFIED; Insulator Material: POLYTETRAFLUOROETHYLENE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved