Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
132172RP by Amphenol is an RF adapter with threaded coupling, PTFE insulator, and SMA-RP-SMA style. It features beryllium copper contacts with gold finish, plug-jack body style, and coax contact type. Ideal for commercial applications requiring reliable RF connections in a right-angled adapter configuration.
Median Price
$16.795
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
RS Americas
1+ parts
$15.690
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$17.900
$12.934
$11.547
Mouser Electronics
$12.930
$11.540
RS (Exports)
$20.090
Master Electronics
$11.940
$9.650
Verical
Powell Electronics
$10.870
$9.440
Nova Conductors
$11.590
Vyrian
VNN
Electro Sonic
$10.330
$8.180
Aztec Data Supply Inc.
$4.880
Corohmni
$6.824
Ampacity Inc.
$8.680
Netroflash
Gateway Technologies
$10.315
Advanced Electronics
$11.822
Singapore Electronics
$12.749
$11.856
$11.346
$10.836
Allen Electronics Distributors
$15.040
$11.770
Continental Prestige Electronics
$15.330
$12.650
AZTECH Wire
$16.091
Argo Parts USA
Perfect Parts
Threading ensures a secure and stable connection, reducing the risk of signal loss or interference.
PTFE is known for its excellent electrical properties, ensuring minimal signal loss and high performance.
This adapter style is commonly used in RF applications, offering compatibility and ease of use.
The right-angled design can help in tight spaces, providing flexibility and convenience during installations.
Beryllium copper offers high conductivity and durability, ensuring reliable and long-lasting connections.
Gold plating on mating contacts helps in reducing signal loss and corrosion, maintaining signal integrity over time.
The natural color of the insulator indicates transparency and purity of the material used, reflecting quality and attention to detail.
The plug-jack design allows for easy identification and connection of the adapter, streamlining the setup process.
Coaxial contact style is ideal for RF applications, providing efficient transmission of high-frequency signals with minimal interference.
Designed for commercial use, this adapter ensures consistent performance and durability in various applications.
RF Adapters 132172RP attributes and parameters. Explore more RF Adapters devices from Amphenol
Adapter Style:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Material:
Contact Style:
Coupling Type:
Insulator Color:
Insulator Material:
Panel Mount:
Reliability:
Sub-Category:
132172RP Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.80.00
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
1N4148
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
Surge Components
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
5203
Api Technologies
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-MALE; Additional Features: VSWR 1.07 AT 8 GHZ ALSO AVAILABLE; MIL Conformity: NO; Filter Feature: NO;
033-0101-0001
TE Connectivity's 033-0101-0001 RF Adapter features gold termination, bayonet-threaded coupling, and PTFE insulator. With a VSWR of 1.2 and impedance of 50 ohm, it is ideal for commercial applications requiring reliable RF connections in straight configurations.
R191966001W
Radiall S A
Radiall S A R191966001W RF Adapter features 0.76 dB insertion loss, 1.7 VSWR, and 40 GHz max operating frequency. With SMA2.9-SBMO style, it's ideal for high-frequency RF connections in aerospace and telecommunications applications.
5056
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-FEMALE; Adapter Style: 1.85MM-1.85MM; IEC Conformity: NO; JESD-609 Code: e4;
R125705000
The Radiall S A R125705000 is an SMA-SMA RF straight adapter with gold termination for 50 ohm impedance. With a max operating frequency of 18 GHz, it is ideal for high-frequency applications requiring threaded coupling and PTFE insulator material.
1568
Cobham Plc
1568 RF Adapter by Cobham Plc features a low insertion loss of 0.5 dB, gold termination contact finish, and threaded coupling type. Ideal for panel mounting, this SMA-SMA adapter has a max operating frequency of 26.5 GHz and is suitable for applications requiring a 50 ohm characteristic impedance in high-frequency RF connections.
5140
The Cobham Plc 5140 RF Adapter is a threaded, 7/16-DIN-SMA style adapter with a gold termination contact finish. It has a characteristic impedance of 50 ohm and can operate at frequencies up to 18 GHz. This female-female adapter is commonly used in high-frequency applications for connecting RF components.
1053770-1
TE Connectivity's 1053770-1 RF Adapter features 0.3 dB insertion loss, threaded coupling type, and TFE fluorocarbon insulator. Ideal for panel mounting in applications requiring a 25 GHz max operating frequency with 50 ohm impedance. Suitable for use in high-frequency RF connections.
5165
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-FEMALE; IEC Conformity: NO; DIN Conformance: NO; Adapter Style: N-BNC;
1045725-1
TE Connectivity's 1045725-1 RF Adapter features a 0.7" body length, threaded coupling type, and PTFE insulator material. Ideal for commercial applications, this SSMA-SSMA adapter has a 50 ohm impedance and operates b/w -65 to 125°C.
242120
The Amphenol 242120 RF Adapter is a threaded-threaded N-F connector with PTFE insulator. It features phosphor bronze contacts with gold finish, suitable for commercial applications. This female-female adapter in jack-jack body style is ideal for straight coax connections.
Tyco Electronics Amp
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE; Coupling Type: THREADED; DIN Conformance: NO; IEC Conformity: NO;
5198
Aeroflex/inmet
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-MALE; Characteristic Impedance: 75 ohm; Termination Contact Finish: GOLD; Voltage Standing Wave Ratio: 1.3;
1055091-1
TE Connectivity's 1055091-1 RF Adapter features 0.18 dB insertion loss, threaded coupling type, and PTFE insulator material. Ideal for applications requiring a 50 ohm characteristic impedance, this QMA-SMA adapter operates at frequencies up to 12.4 GHz with a VSWR of 1.17.
UG-914/U
Winchester Interconnect
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE; DIN Conformance: NO; Adapter Style: BNC-BNC; Insulator Material: POLYTETRAFLUOROETHYLENE;
5512-7501-000
The Radiall S A 5512-7501-000 is a panel mount RF adapter with a bayonet-snap coupling type and polytetrafluoroethylene insulator material. It has a BNC-SMB adapter style and is suitable for applications requiring a 50 ohm characteristic impedance and max operating frequency of 4 GHz.
835
Connecting Devices
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; DIN Conformance: NO; Additional Features: VSWR MAX AT:18 GHZ; Voltage Standing Wave Ratio: 1.05; MIL Conformity: NO;
26-8014
Vertiv
RF STRAIGHT ADAPTER;
1124
Ddk
RF STRAIGHT ADAPTER; MIL Conformity: NO; DIN Conformance: NO; IEC Conformity: NO;
31_QMA-50-0-1/199_NE
Huber+suhner Ag
31_QMA-50-0-1/199_NE RF Adapter by Huber+suhner Ag features SNAP coupling, POLYSTYROL insulator, and 85°C max operating temp. Ideal for applications requiring a QMA-QMA adapter with 50 ohm impedance, such as RF connector connections up to 6 GHz frequency.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
132170-12SS
RF STRAIGHT ADAPTER; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
132170-12
132170-10RP-RP
132170
Amphenol 132170 is an RF adapter with SMA-SMA connector type, gold termination, and threaded coupling. It has a 50 ohm impedance and PTFE insulator material. Ideal for commercial applications requiring reliable panel-mounted RF connections.
132172
Amphenol's 132172 RF Adapter is a threaded SMA-SMA adapter with PTFE insulator. It features 50 ohm impedance, male-female contact gender, and plug-jack body style. Ideal for RF applications requiring right-angled connectivity in various industries.
132170-10
RF STRAIGHT ADAPTER; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 1400VAC; Mounting Style: STRAIGHT; Contact Style: COAX; Maximum Operating Temperature (Cel): 165;
132170RP
132170RP by Amphenol is an RF adapter with SMA-RP-SMA style, PTFE insulator, and BeCu contact material. It is used in commercial applications for connecting RF devices due to its AU finish and COAX contact style. The adapter has a jack-jack body style and straight mounting design for reliable performance.
132171RP-10
Amphenol's 132171RP-10 RF Adapter features gold termination, threaded coupling, and PTFE insulator. With a max operating temp of 165°C and min of -65°C, it is ideal for applications requiring SMA-SMA adapters with 50 ohm impedance up to 18 GHz frequency.
132172RP-RP
RF RIGHT ANGLED ADAPTER; Reliability: COMMERCIAL; Contact Gender: FEMALE-MALE; Mounting Style: RIGHT ANGLE; Contact Style: COAX; Insulator Material: POLYTETRAFLUOROETHYLENE;
132170-11
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE; Panel Mount: YES; Coupling Type: THREADED; MIL Conformity: NO;
132171
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE-FEMALE; DIN Conformance: NO; Contact Material: BERYLLIUM COPPER, BERYLLIUM COPPER;
132169
Amphenol 132169 RF Adapter features threaded coupling, gold contact finish, and PTFE insulator. With a max operating frequency of 18 GHz and impedance of 50 ohm, it is ideal for commercial applications requiring reliable RF connections at temperatures ranging from -65 to 165°C.
132171RP
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE-FEMALE; Panel Mount: NO; Insulator Material: POLYTETRAFLUOROETHYLENE;
132168RP
RF STRAIGHT ADAPTER; Reliability: COMMERCIAL; Contact Gender: MALE-FEMALE; Mating Contact Finish: AU; Contact Material: BERYLLIUM COPPER; Insulator Material: POLYTETRAFLUOROETHYLENE;
132172RT-RT
RF RIGHT ANGLED ADAPTER; Reliability: COMMERCIAL; Contact Gender: MALE-FEMALE; Insulator Color: NATURAL; Contact Material: BERYLLIUM COPPER, BERYLLIUM COPPER; Mounting Style: RIGHT ANGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved