Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
132170RP by Amphenol is an RF adapter with SMA-RP-SMA style, PTFE insulator, and BeCu contact material. It is used in commercial applications for connecting RF devices due to its AU finish and COAX contact style. The adapter has a jack-jack body style and straight mounting design for reliable performance.
Median Price
$20.200
Lifecycle Status
Suppliers In-Stock
28
In-Stock Inventory
1k+
RS Americas
1+ parts
$15.480
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$17.720
$12.802
$11.429
Mouser Electronics
$12.800
$11.420
RS (Exports)
$18.760
$15.290
Master Electronics
$19.130
$11.790
$11.050
Chip1Stop
AE Petsche
$23.600
$14.750
Element14
$27.900
Farnell
$30.020
$19.507
$16.808
Newark
$32.220
$24.130
$22.780
Powell Electronics
$33.840
Encitech
$92.580
TTI Europe
$15.251
$14.370
Arrow
$6.908
Verical
$22.845
Nova Conductors
$13.344
Electro Sonic
$16.800
$11.820
$9.740
TestEquity
$21.650
Rutronik
$23.810
$20.870
TME
$33.870
$23.710
IBS Electronics
$35.786
VNN
Connector Distribution Corp
Right Parts Inc.
Vyrian
Elcom Components
American Microsemiconductor Inc.
American Connector Supply Corp
Aztec Data Supply Inc.
$6.350
Corohmni
$6.486
Ampacity Inc.
$12.660
Gateway Technologies
$12.853
$11.439
Semicontronic
$12.960
$12.636
$12.571
Netroflash
Continental Prestige Electronics
$14.030
$13.410
Singapore Electronics
$14.138
$13.148
$12.582
$12.017
Allen Electronics Distributors
$19.650
$15.380
Argo Parts USA
Authorized Procurement Solutions
Perfect Parts
This material provides excellent insulation properties, making the adapter highly reliable and durable.
The SMA-RP-SMA style ensures a secure and efficient connection between devices, preventing signal loss.
The RF straight adapter simplifies installation and maintenance, saving time and effort.
Beryllium copper contacts ensure high conductivity and longevity, enhancing the adapter's performance.
Gold plating on mating contacts improves signal transmission and prevents corrosion, extending the adapter's lifespan.
The natural color of the insulator provides a clean and professional look, ideal for various applications.
The jack-jack body style offers compatibility with a wide range of devices, making it a versatile choice for different setups.
The straight mounting style allows for easy and secure installation, ensuring a stable connection between devices.
The coaxial contact style is ideal for carrying high-frequency signals with minimal interference, ensuring superior performance.
This adapter is designed for commercial applications, guaranteeing high-quality and consistent performance.
RF Adapters 132170RP attributes and parameters. Explore more RF Adapters devices from Amphenol
Adapter Style:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Material:
Contact Style:
Insulator Color:
Insulator Material:
Mounting Style:
Reliability:
Sub-Category:
132170RP Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.80.00
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
1554216002
Molex
WIRE AND CABLE;
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
Fairchild Semiconductor
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
Taitron Components
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
1057343-1
Tyco Electronics Amp
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE; DIN Conformance: NO; Voltage Standing Wave Ratio: 1.24; Insulator Material: POLYTETRAFLUOROETHYLENE;
5222
Aeroflex/inmet
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE; Mating Contact Finish: GOLD; Maximum Operating Frequency: 50 GHz; Voltage Standing Wave Ratio: 1.35;
R125.720.000W
Radiall S A
R125.720.000W by Radiall S A is an RF Adapter with PTFE insulator, operating temp range of -65 to 165°C, and SMA-SMA adapter style. It has a VSWR of 1.14, durability of 500 cycles, and operates at up to 18 GHz. Ideal for commercial applications requiring a reliable 50 ohm coax connection at high frequencies.
1696183
Phoenix Contact
RF Y ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE-MALE; MIL Conformity: NO; Termination Contact Finish: GOLD OVER NICKEL; Coupling Type: THREADED;
2991-6002
Johnson Components
The Johnson Components 2991-6002 is an SMA-SMA RF straight adapter with threaded coupling, suitable for panel mount applications. Featuring a 50 ohm characteristic impedance, this female-female jack connector is ideal for RF signal transmission in various electronic devices and systems.
5203
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-MALE; MIL Conformity: NO; Termination Contact Finish: GOLD; Voltage Standing Wave Ratio: 1.12;
5012
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-FEMALE; Termination Contact Finish: GOLD; Panel Mount: NO; Filter Feature: NO;
1053635-1
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE; Insertion Loss: .25 dB; Voltage Standing Wave Ratio: 1.16; Filter Feature: NO;
901-125-11SF
Amphenol
Amphenol's 901-125-11SF RF Adapter features 0.13 dB insertion loss, threaded coupling type, and gold termination. Ideal for commercial applications with a max operating frequency of 12.4 GHz, this SMA-SMA adapter has a characteristic impedance of 50 ohm and operates b/w -65 to 165 °C.
1123
Ddk
RF STRAIGHT ADAPTER; DIN Conformance: NO; MIL Conformity: NO; IEC Conformity: NO;
5145
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-MALE; Adapter Style: 7/16-DIN-SMA; Filter Feature: NO; IEC Conformity: NO;
2818876
RF TEE ADAPTER; Maximum Operating Frequency: 2.3 GHz; Contact Material: NOT SPECIFIED; Filter Feature: NO; Mating Contact Finish: NOT SPECIFIED; Characteristic Impedance: 50 ohm;
228226-1
TE Connectivity
TE Connectivity's 228226-1 RF Adapter features BAYONET coupling, POLYETHYLENE insulator, and 50 ohm impedance. Ideal for commercial applications with a max frequency of 4 GHz, it offers durability with 500 cycles and a VSWR of 1.25. Suitable for panel mounting, this adapter has FEMALE-FEMALE contact gender in a JACK shell style.
132172RP
132172RP by Amphenol is an RF adapter with threaded coupling, PTFE insulator, and SMA-RP-SMA style. It features beryllium copper contacts with gold finish, plug-jack body style, and coax contact type. Ideal for commercial applications requiring reliable RF connections in a right-angled adapter configuration.
5331
Cobham Plc
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-FEMALE; Characteristic Impedance: 50 ohm; JESD-609 Code: e4; Contact Material: BERYLLIUM COPPER;
ADT-2713-NM-3MF-02
Midwest Microwave
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: MALE-FEMALE; Contact Material: NOT SPECIFIED; MIL Conformity: NO; Panel Mount: NO;
132170
Amphenol 132170 is an RF adapter with SMA-SMA connector type, gold termination, and threaded coupling. It has a 50 ohm impedance and PTFE insulator material. Ideal for commercial applications requiring reliable panel-mounted RF connections.
1466297-1
TE Connectivity's 1466297-1 RF Adapter features BAYONET-THREADED coupling, POLYTETRAFLUOROETHYLENE insulator, and 93 ohm impedance. Ideal for commercial applications, this panel-mount adapter has a Voltage Standing Wave Ratio of 1.2 and is designed as a BNC-MICRODOT straight adapter for RF connections.
32_N-SMA-50-1/11-_NE
Huber+suhner Ag
32_N-SMA-50-1/11-_NE RF Adapter by Huber+suhner Ag features threaded coupling, PTFE insulator, and beryllium copper contacts. With a VSWR of 1.36 and max operating frequency of 18 GHz, it is ideal for commercial applications requiring a durable adapter with a characteristic impedance of 50 ohm. Operating temperature range from -65 to 165 °C makes it suitable for various RF connector needs.
RJS-12D04FM-RS8001
RF RIGHT ANGLED ADAPTER;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
132170-12SS
RF STRAIGHT ADAPTER; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
132170-12
RF STRAIGHT ADAPTER;
132170-10RP-RP
132172
Amphenol's 132172 RF Adapter is a threaded SMA-SMA adapter with PTFE insulator. It features 50 ohm impedance, male-female contact gender, and plug-jack body style. Ideal for RF applications requiring right-angled connectivity in various industries.
132170-10
RF STRAIGHT ADAPTER; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 1400VAC; Mounting Style: STRAIGHT; Contact Style: COAX; Maximum Operating Temperature (Cel): 165;
132171RP-10
Amphenol's 132171RP-10 RF Adapter features gold termination, threaded coupling, and PTFE insulator. With a max operating temp of 165°C and min of -65°C, it is ideal for applications requiring SMA-SMA adapters with 50 ohm impedance up to 18 GHz frequency.
132172RP-RP
RF RIGHT ANGLED ADAPTER; Reliability: COMMERCIAL; Contact Gender: FEMALE-MALE; Mounting Style: RIGHT ANGLE; Contact Style: COAX; Insulator Material: POLYTETRAFLUOROETHYLENE;
132170-11
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE; Panel Mount: YES; Coupling Type: THREADED; MIL Conformity: NO;
RF RIGHT ANGLED ADAPTER; Reliability: COMMERCIAL; Contact Style: COAX; Panel Mount: NO; Mating Contact Finish: AU,AU; Contact Material: BERYLLIUM COPPER, BERYLLIUM COPPER;
132171
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE-FEMALE; DIN Conformance: NO; Contact Material: BERYLLIUM COPPER, BERYLLIUM COPPER;
132169
Amphenol 132169 RF Adapter features threaded coupling, gold contact finish, and PTFE insulator. With a max operating frequency of 18 GHz and impedance of 50 ohm, it is ideal for commercial applications requiring reliable RF connections at temperatures ranging from -65 to 165°C.
132171RP
RF STRAIGHT ADAPTER; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE-FEMALE; Panel Mount: NO; Insulator Material: POLYTETRAFLUOROETHYLENE;
132132-1100-02A
The Phoenix Company Of Chicago
RF CONNECTOR ADAPTER; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 450VAC; Maximum Operating Frequency: 26.5 GHz; Minimum Operating Temperature: -65 Cel; Contact Material: BERYLLIUM COPPER;
132168RP
RF STRAIGHT ADAPTER; Reliability: COMMERCIAL; Contact Gender: MALE-FEMALE; Mating Contact Finish: AU; Contact Material: BERYLLIUM COPPER; Insulator Material: POLYTETRAFLUOROETHYLENE;
132170SS
RF STRAIGHT ADAPTER; Reliability: COMMERCIAL; Contact Gender: FEMALE-FEMALE; Contact Style: COAX; Insulator Material: POLYTETRAFLUOROETHYLENE; Mating Contact Finish: NOT SPECIFIED;
132170SS-10
RF STRAIGHT ADAPTER; Reliability: COMMERCIAL; Mounting Style: STRAIGHT; Contact Style: COAX; Insulator Material: POLYTETRAFLUOROETHYLENE; Insulator Color: NATURAL;
132171RP-RP
RF STRAIGHT ADAPTER; Reliability: COMMERCIAL; Insulator Color: NATURAL; Characteristic Impedance: 50 ohm; Mating Contact Finish: AU,AU; Contact Style: COAX;
132171RT
RF STRAIGHT ADAPTER; Reliability: COMMERCIAL; Contact Material: BRASS,BRASS; Mounting Style: STRAIGHT; Mating Contact Finish: AU,AU; Insulator Material: POLYTETRAFLUOROETHYLENE;
132171SS
RF STRAIGHT ADAPTER; Reliability: COMMERCIAL; Insulator Color: NATURAL; Characteristic Impedance: 50 ohm; Maximum Operating Temperature (Cel): 165; Maximum Operating Frequency: 18 GHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved