Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF TNC CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Maximum Operating Temperature (Cel): 165; Voltage Standing Wave Ratio: 1.3; Contact Style: COAX;
Median Price
$5.860
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Arrow
1+ parts
$3.966
100+ parts
$2.678
1k+ parts
-
10k+ parts
Powell Electronics
$4.680
$3.490
Newark
$5.770
$4.250
$3.850
DigiKey
$6.290
$4.493
$3.513
$3.389
Element14
$6.860
$5.500
$4.600
Mouser Electronics
$8.650
$5.510
$4.140
Chip1Stop
$2.900
Verical
$5.950
Semi Source
Gateway Technologies
$2.811
$2.501
Singapore Electronics
$3.092
$2.875
$2.751
$2.628
Advanced Electronics
$7.685
$6.993
$6.302
Andel Nordic
$8.620
$6.037
Authorized Procurement Solutions
Kepictronics
Perfect Parts
TNC Connectors 122116RP attributes and parameters. Explore more TNC Connectors devices from Amphenol
Additional Features:
Body Depth:
Body Diameter:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Durability:
Insertion Loss:
Insulator Color:
Insulator Material:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
122116RP Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32F103C8T6
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
Frontier Electronics
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
73216-2230
Molex
The Molex 73216-2230 is a TNC connector with a panel mount feature. It has an insertion loss of 0.25 dB and a voltage standing wave ratio of 1.3. This RF connector is commonly used in applications requiring a max operating frequency of 6 GHz, such as commercial electronics.
16_TNC-50-3-111/133_NE
Huber+suhner Ag
16_TNC-50-3-111/133_NE by Huber+suhner Ag is a threaded RF TNC connector with gold-plated brass contacts. It has a max operating frequency of 11 GHz, 50 ohm impedance, and can withstand temperatures from -65 to 165 °C. Ideal for commercial applications requiring durable connectors with high reliability and low VSWR.
125-1-2
Kings Electronics
RF TNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Characteristic Impedance: 50 ohm; Body or Shell Style: PLUG;
1057780-1
TE Connectivity
TE Connectivity's 1057780-1 is a TNC Connector with threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it features a nickel-finished brass shell, female contact gender, and solder termination.
1057679-1
TE Connectivity's 1057679-1 RF TNC Connector features threaded coupling, 0.06 dB insertion loss, and 50 ohm impedance. Ideal for panel mounting in applications requiring a max operating frequency of 15 GHz. With TFE insulator material and gold shell finish, it ensures reliable performance in commercial settings.
R143207000
Radiall S A
R143207000 by Radiall S A is a RF TNC CONNECTOR with 50 ohm impedance, 0.18 dB insertion loss, and 1.3 VSWR. It features gold (Au) termination with Nickel (Ni) barrier, threaded coupling, and PTFE insulator. Ideal for applications up to 11 GHz requiring MIL and IEC conformity.
R143082000
R143082000 by Radiall S A is a RF TNC CONNECTOR with 50 ohm impedance, 0.18 dB insertion loss, and 1.3 VSWR. It features GOLD OVER NICKEL termination for MIL conformity and POLYTETRAFLUOROETHYLENE insulator. Ideal for applications up to 11 GHz requiring threaded coupling in cable mounting setups.
M39012/30-0010
Winchester Interconnect
M39012/30-0010 by Winchester Interconnect is a RF TNC connector with threaded coupling, suitable for RG-58 cables. Featuring a 50 ohm impedance and PTFE insulator, it operates up to 11 GHz. This right-angle plug connector is commonly used in high-frequency applications requiring reliable signal transmission.
122408
Amphenol
Amphenol 122408 is an RF TNC connector with threaded coupling, PTFE insulator, and male contact gender. It is used for cable mounting with crimp termination in plug body style. Ideal for applications requiring secure RF connections in straight mounting configurations.
73216-2231
The Molex 73216-2231 RF TNC Connector features 0.25 dB insertion loss, 0.732" body depth, and 1.3 VSWR. Ideal for commercial applications, it is a panel mount connector with PTFE insulator material and brass shell finish. Suitable for board and panel mounting, this male jack connector has a right-angle mounting style with solder termination.
2762087
Phoenix Contact
RF TNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Characteristic Impedance: 50 ohm; IEC Conformity: NO; Filter Feature: NO;
1-0431-34
Trompeter Electronics
Trompeter Electronics' 1-0431-34 is a TNC RF connector with nickel finish, suitable for panel mounting. Featuring threaded coupling, it has male contact gender and plug body style. Ideal for cable and panel mounting applications requiring reliable RF connections.
R143.156.000
Radiall S A's R143.156.000 TNC Connector features 5000000000 ohm Insulation Resistance, 0.23 dB Insertion Loss, and 1500VAC Dielectric Withstanding Voltage. Ideal for RF applications with RG-141 cable types, this connector has a characteristic impedance of 50 ohm and operates up to 11 GHz frequency.
122409
Amphenol 122409 is a TNC RF connector with 0.453" body diameter and 1.135" depth, featuring threaded coupling and brass shell material. Suitable for commercial applications, it has a characteristic impedance of 50 ohm and uses crimp termination for cable mounting.
KA-59-296
The Winchester Interconnect KA-59-296 is a RF TNC connector with threaded coupling, gold termination contact finish, and 50 ohm impedance. It is designed for applications requiring high-frequency signal transmission up to 11 GHz, commonly used in cable assemblies for right-angle mounting.
125-1-1
RF TNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Characteristic Impedance: 50 ohm; DIN Conformance: NO;
EZ-400-TM-X
Times Microwave Systems
RF TNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: YES; Mounting Style: STRAIGHT; Characteristic Impedance: 50 ohm;
R143258000
Radiall S A's R143258000 is a TNC Connector with 0.18 dB Insertion Loss, 1.3 VSWR, and 11 GHz Max Operating Frequency. Ideal for RF applications requiring MIL and IEC Conformity, it features Gold/Nickel termination on PTFE insulator for 50 ohm impedance. Suitable for panel mount installations with threaded coupling.
5-1814804-3
TE Connectivity's 5-1814804-3 RF TNC Connector features 50 ohm impedance, PTFE insulator, and zinc alloy shell. Ideal for commercial applications with a frequency up to 2 GHz, it has a temperature range of -55 to 85°C and durability of 50 cycles.
122408RP
The Amphenol 122408RP is a RF TNC connector with a body diameter of 0.571 inch, made of brass shell material and PTFE insulator. It has a dielectric voltage rating of 2100VAC, operates b/w -40 to 85 °C, and supports up to 11 GHz frequency. Ideal for RG-8 cable termination in commercial applications due to its durability and reliability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved