Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF BNC CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Shell Material: BRASS; No. of Ports: 1;
Median Price
$10.248
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
< 1k
DigiKey
1+ parts
-
100+ parts
$25.855
1k+ parts
10k+ parts
Powell Electronics
$7.590
Verical
IBS Electronics
$17.711
$10.982
Gateway Technologies
$8.490
$7.556
Singapore Electronics
$9.339
$8.685
$8.311
$7.938
Perfect Parts
BNC Connectors 112981 attributes and parameters. Explore more BNC Connectors devices from Amphenol
Body Diameter:
Body or Shell Style:
Connector Type:
Contact Gender:
Contact Style:
Insulator Color:
Insulator Material:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
112981 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
5315-01-069-7753, 5315010697753, 5995-01-373-1158, 5995013731158
NIIN
010697753, 013731158
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
STM32H753BIT6
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
STM8S003F3P6TR
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
LD1117S33TR
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
Semitron
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
BJ77
Vertiv
RF BNC CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Total No. of Contacts: 1; Body Diameter: .38 inch; Termination Contact Finish: NICKEL;
227161-1
TE Connectivity
TE Connectivity's 227161-1 is a BNC connector with a body length of 0.581 inch, insulation resistance of 5G ohm, and max operating temperature of 85°C. It is commonly used in RF applications up to 4 GHz, featuring a bayonet coupling type and glass-filled polybutylene terephthalate insulator material.
BNC7T-J-P-GN-ST-EM1
Samtec
The Samtec BNC7T-J-P-GN-ST-EM1 is a RF BNC connector with gold termination, bayonet coupling, and 75 ohm impedance. Ideal for applications requiring high frequency up to 6 GHz, such as commercial electronics. Features panel mount option and surface mount termination for versatile installation.
112559
Amphenol
Amphenol 112559 is a BNC connector with gold termination, bayonet coupling, and acetal insulator. Ideal for RF applications with 75 ohm impedance, it features a brass shell and crimp termination for commercial reliability in cable mounting setups.
112522
Amphenol 112522 is a BNC connector with gold termination, bayonet coupling, and acetal insulator. Ideal for RF applications, it features a brass shell with nickel finish for cable and panel mounting. The female jack connector supports RG-178/U cables with crimp termination in commercial settings.
1-5225398-5
TE Connectivity 1-5225398-5 is a BNC Connector with 0.572" body diameter, 0.2 dB insertion loss, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it features SNAP coupling, PTFE insulator, and nickel finish.
R141.075.000
Radiall S A
Radiall S A's R141.075.000 BNC Connector features 0.563" body diameter, 5000000000 ohm insulation resistance, and 0.13 dB insertion loss. Ideal for RF applications up to 4 GHz with RG-188 cable type, it offers a durable design with gold over nickel termination finish and PTFE insulator material.
202100
Amphenol's 202100 BNC Connector features Bayonet coupling, Polypropylene insulator, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, this twist-on connector with male contact is designed for cable mounting in a right-angle configuration.
112409
Amphenol's 112409 is a BNC Connector with gold termination, bayonet coupling, and polypropylene insulator. Ideal for RF applications, it features panel mount capability and solder termination for female contact gender in board and panel mounting configurations.
R141254000
R141254000 by Radiall S A is a BNC Connector with 0.13 dB Insertion Loss, 1.22 VSWR, and 50 ohm Impedance. Ideal for RF applications up to 5 GHz, featuring GOLD OVER NICKEL Termination Contact Finish and POLYTETRAFLUOROETHYLENE Insulator Material for reliable performance in cable and panel mounting setups.
R141082000W
R141082000W by Radiall S A is a BNC connector with 0.563" body diameter, 5000000000 ohm insulation resistance, and 0.115 dB insertion loss. It is used in RF applications up to 4 GHz, featuring POLYTETRAFLUOROETHYLENE insulator material for durability and NICKEL shell finish for reliability.
413557-2
Tyco Electronics Amp
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Characteristic Impedance: 50 ohm; MIL Conformity: NO; Filter Feature: NO; IEC Conformity: NO;
5348
Pomona Electronics
Pomona Electronics 5348 is a BNC connector with gold termination, bayonet coupling, and PTFE insulator. Ideal for RF applications with 75 ohm impedance, solder termination, and female contact gender. Suitable for panel mounting in straight orientation for reliable signal transmission.
31-70008-1000
Amphenol 31-70008-1000 BNC Connector has a Dielectric Withstanding Voltage of 2100VAC, operates b/w -65 to 165 °C, and offers a Max Operating Frequency of 4 GHz. Ideal for RF applications requiring a durable connector with a characteristic impedance of 75 ohm.
M39012/16-0503
Amphenol's M39012/16-0503 BNC Connector features 0.563" body diameter, 0.2 dB insertion loss, and 1.11" body depth. Ideal for RF applications with 50 ohm impedance, it supports RG-142/U and RG-400/U cables, operating up to 4 GHz frequency range.
R142562000
Radiall S A's R142562000 is a BNC Connector with 0.2 dB Insertion Loss, 1.3 VSWR, and 75 ohm Impedance. Ideal for RF applications up to 1.5 GHz, featuring Bayonet Coupling and PolyTetraFluoroEthylene insulator for reliable performance in board and panel mounting setups.
031-70338
Amphenol 031-70338 BNC Connector has Dielectric Voltage of 1050VAC, Body Depth 0.878", and VSWR of 1.5. Ideal for RF applications with RG-59/U cables, it's a right-angle plug connector with crimp termination suitable for up to 1GHz frequency in commercial settings.
5415025-2
TE Connectivity's 5415025-2 BNC Connector features a body diameter of 0.505", insulation resistance of 5000000000 ohm, and bayonet coupling type. Ideal for RF applications with characteristic impedance of 50 ohm, operating frequency up to 4 GHz, and durability of 500 cycles.
R316072
Radiall S A's R316072 BNC Connector features Bayonet coupling, PTFE insulator, 50 ohm impedance. Ideal for RF applications up to 2 GHz with male contact gender and crimp termination on cable mounting.
73138-5033
Molex
The Molex 73138-5033 is a BNC connector with panel mount capability. It has a body length of 0.577 inch, insulation resistance of 5G ohm, and insertion loss of 0.2 dB. This connector is commonly used in RF applications with a characteristic impedance of 50 ohm and max operating frequency of 4 GHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved