Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF BNC CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; Body or Shell Style: JACK; MIL Conformity: NO; IEC Conformity: NO;
Median Price
$7.770
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Mouser Electronics
1+ parts
100+ parts
$6.150
1k+ parts
$4.530
10k+ parts
-
Area51 Electronics
Gateway Technologies
$2.725
$2.425
Singapore Electronics
$2.997
$2.787
$2.667
$2.547
Perfect Parts
BNC Connectors 112418 attributes and parameters. Explore more BNC Connectors devices from Amphenol
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mounting Style:
Mounting Type:
Option:
Panel Mount:
Termination Type:
112418 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
2090-01-574-5559, 2090015745559, 4330-01-245-4414, 4330012454414, 4730-21-880-2828, 4730218802828
NIIN
015745559, 012454414, 218802828
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
Synsemi
Taitron Components
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
7233
Pomona Electronics
The Pomona Electronics 7233 BNC Connector features gold termination, bayonet coupling, and PTFE insulator. Ideal for RF applications with 75 ohm impedance, 3 GHz frequency, and male contact gender. Suitable for cable mounting with crimp termination for low VSWR of 1.1.
34-1018
Amphenol
Amphenol 34-1018 BNC Connector features 1400VAC Dielectric Withstanding Voltage, 0.689" Body Depth, and 75 ohm Characteristic Impedance. Ideal for RF applications up to 4 GHz frequency with POLYTETRAFLUOROETHYLENE insulator material and GOLD shell finish. Suitable for commercial use with FEMALE contact gender and BOARD mounting type.
M39012/16-0014
Amphenol's M39012/16-0014 BNC Connector has a body diameter of 0.593", withstands 2100VAC, and operates b/w -65 to 165°C. Ideal for RF applications with RG-142 cable types, it features a characteristic impedance of 50 ohm and durability up to 500 cycles.
5227161-2
TE Connectivity
TE Connectivity's 5227161-2 RF BNC Connector features a body length of 0.581", insulator resistance of 5G ohm, and bayonet coupling type. Ideal for commercial applications, this connector has a max operating frequency of 4GHz and can withstand temperatures from -55 to 85°C.
2-329063-1
TE Connectivity's 2-329063-1 BNC Connector features Bayonet coupling, Polypropylene insulator, and 50 ohm impedance. Ideal for RF applications up to 4 GHz with MIL conformity, crimp termination, and a max operating temperature of 85°C.
R142017000
Radiall S A
R142017000 by Radiall S A is a BNC connector with 0.2 dB insertion loss, 1.3 VSWR, and 75 ohm characteristic impedance. It is used for RF applications up to 1.5 GHz, featuring bayonet coupling and clamp termination.
R141426161
R141426161 BNC Connector by Radiall S A features a body length of 0.472", insertion loss of 0.03 dB, and insulation resistance of 5000000000 ohm. Ideal for RF applications, this connector has a bayonet coupling type and operates b/w -35 to 70°C with a max frequency of 1.5 GHz.
5-1634504-2
TE Connectivity's 5-1634504-2 BNC Connector features insulation resistance of 5000000000 ohm, body depth of 0.421 inch, and bayonet coupling type. Ideal for RF applications with characteristic impedance of 75 ohm and max operating frequency of 2 GHz. Suitable for commercial use with durability of 50 cycles and operating temperature range from -55 to 85 °C.
5-1634503-1
TE Connectivity's 5-1634503-1 BNC Connector features 50 ohm impedance, 0.2 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for RF applications up to 4 GHz with a max operating temperature of 85°C. The connector is durable with a shell made of zinc alloy and termination via soldering.
R141254000
R141254000 by Radiall S A is a BNC Connector with 0.13 dB Insertion Loss, 1.22 VSWR, and 50 ohm Impedance. Ideal for RF applications up to 5 GHz, featuring GOLD OVER NICKEL Termination Contact Finish and POLYTETRAFLUOROETHYLENE Insulator Material for reliable performance in cable and panel mounting setups.
31-70008
Amphenol 31-70008 BNC Connector features gold finish, bayonet coupling, and PTFE insulator. Ideal for RF applications with 75 ohm impedance, 1.9 VSWR, and up to 4 GHz frequency. Male crimp termination for cable mounting in straight style plug configuration.
456E-717H
The Amphenol 456E-717H is a BNC connector with panel mount and filter feature. It has RF BNC connector type, solder termination, and female contact gender. Ideal for board and panel mounting in applications requiring right angle mounting style for RF connections.
R141327000
Radiall S A's R141327000 BNC Connector features 0.13 dB insertion loss, 1.22 VSWR, and 50 ohm impedance. Ideal for RF applications up to 5 GHz, with bayonet coupling, gold termination finish, and PTFE insulator.
5225395-6
TE Connectivity's 5225395-6 RF BNC Connector features 0.2 dB insertion loss, 50 ohm impedance, and 4 GHz max operating frequency. Ideal for applications requiring MIL conformity, it is a bayonet-coupled plug with fluoropolymer insulator for temperatures ranging from -55 to 85°C. Suitable for RG 142B/A cables in various setups.
162109
Amphenol 162109 is a BNC RF connector with panel mount, 0.473" body depth, and nickel shell finish. Ideal for commercial applications requiring reliable coaxial connections in panels, it features brass shell material, polybutylene terephthalate insulator, and solder termination.
R141075000W
R141075000W by Radiall S A is a RF BNC connector with 50 ohm impedance, 0.13 dB insertion loss, and 1.22 VSWR. It features bayonet coupling, PTFE insulator, and crimp termination for applications up to 4 GHz in military and IEC compliant setups.
112288
Amphenol 112288 is a BNC RF connector with gold finish, bayonet coupling, and brass shell. Ideal for RG-174/U cable termination on panels due to its panel mount feature. Offers reliable commercial-grade performance in various applications requiring coaxial connections.
112587
Amphenol 112587 is a BNC connector with gold termination for RF applications. It features bayonet coupling, PTFE insulator, and panel mount capability. Ideal for connecting cables in straight configurations requiring reliable signal transmission.
31-320-RFX
Amphenol 31-320-RFX is a BNC connector with 0.571" body diameter, 0.2 dB insertion loss, and 2100VAC dielectric voltage. Ideal for RF applications up to 4 GHz, it features bayonet coupling, PTFE insulator, and brass shell suitable for RG-58 cables.
13-22
Multicomp Pro
13-22 BNC Connector by Multicomp Pro features a gold termination finish, bayonet coupling type, and polytetrafluoroethylene insulator. Ideal for RF applications with a characteristic impedance of 50 ohm and max operating frequency of 11 GHz. Suitable for commercial use in panel-mounted configurations.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved