Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 112133 is a BNC connector with gold termination, bayonet coupling, and acetal insulator. It is used for RF applications with 75 ohm impedance, RG-179/U cable type, and operates up to 1 GHz frequency. Ideal for commercial use due to its reliability and male contact gender.
Median Price
$3.071
Lifecycle Status
Suppliers In-Stock
42
In-Stock Inventory
1k+
PSC Electronics
1+ parts
$1.500
100+ parts
-
1k+ parts
10k+ parts
RS (Exports)
$1.970
PEI Genesis
$2.180
$2.000
$1.810
Powell Electronics
$2.510
$2.230
Avnet
$3.054
$2.272
$1.887
Newark
$3.060
$2.280
$1.890
Element14
$3.082
$2.643
Interstate Connecting
$3.221
$2.806
$2.521
Farnell
$3.382
$3.085
$2.646
Heilind Electronics
$3.383
$2.819
Chip1Stop
$3.470
RS Americas
$3.670
$2.820
$2.490
DigiKey
$3.940
$2.846
$2.419
$2.268
Mouser Electronics
$4.410
$3.540
$2.880
$2.770
Conrad
$5.207
TTI
$2.850
$2.430
$2.400
Arrow
$3.147
Verical
$2.892
Master Electronics
$2.690
$2.590
$2.570
TTI Europe
$1.830
$1.740
BTC Electronics
Electro Enterprises
$2.722
$2.438
$2.237
$2.402
TestEquity
$3.490
TEDSS.com
$3.500
TME
$3.650
$2.800
FDH Electronics
$4.063
$3.585
$3.340
DF Sales Co.
$4.200
IBS Electronics
$6.202
$2.735
$2.679
$2.665
Nova Conductors
$58.790
VNN
Electro Sonic
$2.290
$2.100
$2.040
Vyrian
American Connector Supply Corp
Inventory MP
Bristol Electronics
NAC Semi
$5.330
Semtec, LLC
LWI Electronics Inc
Kallista Electronics Ltd
Prism Electronics
Elcom Components
Ampacity Inc.
$1.270
Semicontronic
$1.238
$1.232
Gateway Technologies
$2.185
$1.944
Singapore Electronics
$2.403
$2.234
$2.138
$2.042
Continental Prestige Electronics
$2.670
$2.070
$1.960
Allen Electronics Distributors
$2.710
$2.120
Aztec Data Supply Inc.
$7.317
Abianca Electronics
$57.026
$54.745
Netroflash
Argo Parts USA
GreenTree Electronics
Perfect Parts
Glotronic Ltd.
Authorized Procurement Solutions
Kepictronics
Eastek
Gold termination provides excellent conductivity and corrosion resistance, ensuring a reliable and long-lasting connection.
Bayonet coupling allows for quick and secure connections without the need for additional tools, making it easy to use in various applications.
Acetal insulator material provides good electrical insulation and durability, enhancing the overall performance and lifespan of the connector.
Nickel shell finish offers excellent protection against corrosion and wear, ensuring the connector remains reliable in challenging environments.
75 ohm characteristic impedance is ideal for high-frequency applications such as video and audio signals, ensuring minimal signal loss and interference.
With a maximum operating frequency of 1 GHz, this BNC connector is suitable for high-speed data transmission and RF applications.
BNC Connectors 112133 attributes and parameters. Explore more BNC Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
112133 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
3120-00-541-0136, 3120005410136, 4810-00-794-0558, 4810007940558, 5935-01-642-3516, 5935016423516, 5985-01-161-9376, 5985011619376, 6130-12-314-8365, 6130123148365, 6635-01-647-3542, 6635016473542
NIIN
005410136, 007940558, 016423516, 011619376, 123148365, 016473542
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
Bkc Semiconductors
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
Dc Components
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
5413969-2
TE Connectivity
TE Connectivity's 5413969-2 BNC Connector has an Insulation Resistance of 5G ohm, Insertion Loss of 0.2 dB, and operates at temperatures from -55 to 85°C. Ideal for RF applications with a max frequency of 4 GHz, this connector features a Bayonet coupling type and PolyTetraFluoroEthylene insulator material.
31-105
Amphenol
Amphenol's 31-105 BNC Connector is a panel mount RF connector with a 0.2 dB insertion loss and a 1.3 voltage standing wave ratio. It is commonly used in applications requiring a hermetic, solder termination female receptacle for board and panel mounting, with a max operating frequency of 4 GHz.
RBD-75-M-00
TE Connectivity's RBD-75-M-00 is a BNC connector with 75 ohm impedance, bayonet coupling, and PTFE insulator. Ideal for RF applications up to 2.8 GHz, it features a brass shell, nickel finish, and solder termination for RG 179 cables.
J01002A1350
Telegartner Karl Gartner
Telegartner Karl Gartner's J01002A1350 BNC Connector features gold termination, bayonet coupling, and polyethylene/PTFE insulator. Ideal for RF applications with 75 ohm impedance, 4 GHz frequency, and low VSWR of 1.25. Suitable for crimp termination on cables with male gender plug design.
5413879-1
TE Connectivity's 5413879-1 BNC Connector features a body diameter of 0.436", insertion loss of 0.3 dB, and insulation resistance of 5G ohm. Ideal for RF applications, this connector has a characteristic impedance of 50 ohm and operates up to 4 GHz with durability for 500 cycles.
112165
Amphenol 112165 is a BNC connector with gold termination, bayonet coupling, and acetal insulator. It is an RF connector for cable mounting with crimp termination. Ideal for applications requiring a female contact gender, plug body style, and right-angle mounting.
31-70261
Amphenol 31-70261 is a BNC connector with gold termination, bayonet coupling, and male contact gender. It is used for RF applications requiring crimp solder termination on cable mounts.
M39012/18-0220
Delta Electronics Manufacturing
Delta Electronics M39012/18-0220 BNC Connector features gold termination, bayonet coupling, and MIL conformity. Ideal for RF applications, it is a panel mount connector with female contact gender and straight mounting style.
M39012/17-0101
Kings Electronics
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: BAYONET; MIL Conformity: YES; IEC Conformity: NO;
1-5225398-5
Tyco Electronics Amp
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: YES; Termination Type: CRIMP; MIL Conformity: NO;
5227726-1
TE Connectivity's 5227726-1 BNC Connector features Bayonet coupling, Glass Filled Polybutylene Terephthalate insulator, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, this female jack connector with solder termination is suitable for panel mounting in various electronic systems.
M39012/24-0002
RF BNC CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-PRF-39012, CAPTIVE CONTACT; Body or Shell Style: RECEPTACLE; DIN Conformance: NO;
5227222-2
TE Connectivity's 5227222-2 BNC Connector features a body length of 0.581", insulation resistance of 5G ohm, and termination contact finish in Tin. Ideal for RF applications with a characteristic impedance of 50 ohm, this connector has a max operating frequency of 4 GHz and durability up to 500 cycles.
31-5329-52RFX
Amphenol 31-5329-52RFX is a BNC connector with 0.2 dB insertion loss, 1500VAC dielectric voltage, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it features gold termination finish, bayonet coupling, and operates b/w -65°C to 165°C.
TE Connectivity 1-5225398-5 is a BNC Connector with 0.572" body diameter, 0.2 dB insertion loss, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it features SNAP coupling, PTFE insulator, and nickel finish.
031-70526-23
Amphenol 031-70526-23 BNC Connector features 5000000000 ohm Insulation Resistance, 2100VAC Dielectric Withstanding Voltage, and POLYTETRAFLUOROETHYLENE Insulator Material. Ideal for RF applications with a max operating frequency of 12 GHz, this connector offers durability with 500 cycles and operates in temperatures ranging from -65 to 165 °C.
R142.016.000W
Radiall S A
R142.016.000W by Radiall S A is a RF BNC connector with 75 ohm impedance, 0.115 dB insertion loss, and 1.5 GHz operating frequency. Ideal for RG-59 cables in commercial applications due to its durability, 500 cycle lifespan, and nickel finish for reliable signal transmission at temperatures ranging from -65 to 165°C.
CPMC-78-18
Vertiv
Vertiv's CPMC-78-18 BNC Connector features gold termination, bayonet coupling, and polymethylpentene insulator. Ideal for RF applications with 75 ohm impedance, male contact gender, and plug body style. Supports up to 2 GHz operating frequency for cable mounting in crimp/solder termination.
112426
Amphenol 112426 is a BNC connector with gold termination, bayonet coupling, and acetal insulator. Ideal for RF applications with 50 ohm impedance, it features panel mount and solder termination for female contacts in straight mounting style.
M39012/18-0102
Winchester Interconnect
Winchester Interconnect's M39012/18-0102 is a BNC RF connector with bayonet coupling, suitable for panel mounting. It features female contact gender, RG-58 cable compatibility, and jack body style. Ideal for straight mounting applications in RF systems requiring coaxial connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
112132
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Option-1: LOCKING; Contact Material: NOT SPECIFIED;
112132RP
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: BAYONET; Manufacturer Series: 112132RP; MIL Conformity: NO;
112116
Amphenol 112116 is a BNC connector with gold termination contact finish, acetal insulator material, and nickel shell finish. It is used for RF applications with a characteristic impedance of 50 ohm and can operate at temperatures ranging from -40 to 85°C.
112116RP
The Amphenol 112116RP is a BNC connector with gold termination and bayonet coupling. It features PTFE insulator material, ideal for RF applications. This female crimp connector is designed for cable mounting in straight configuration.
112134
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; JESD-609 Code: e4; No. of Ports: 1;
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Body or Shell Style: PLUG; Coupling Type: BAYONET;
112118
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Shell Finish: NICKEL; Mounting Style: STRAIGHT;
112127
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; DIN Conformance: NO; Insulator Material: POLYTETRAFLUOROETHYLENE;
112144
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Coupling Type: BAYONET; Termination Type: CRIMP;
112182
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Total No. of Contacts: 1; Mounting Style: RIGHT ANGLE;
112160
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Panel Mount: NO; DIN Conformance: NO;
112119
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Body or Shell Style: PLUG; IEC Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved