Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol's 87583-2010RLF is a telecom & datacom connector with POLYETHYLENE insulator, NICKEL shell finish, and COPPER ALLOY shell material. It has 4 contacts, UL Flammability Code of 94V-0, and FEMALE contact gender. Ideal for board mounting in applications requiring a right angle receptacle design.
Median Price
$0.698
Lifecycle Status
Suppliers In-Stock
30
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.070
100+ parts
$0.774
1k+ parts
$0.659
10k+ parts
$0.592
Mouser Electronics
$1.110
$0.798
$0.651
$0.622
Newark
$1.240
$0.942
$0.917
-
PEI Genesis
$1.440
$0.860
Arrow
$0.704
Verical
$0.710
DigiKey
$0.692
$0.636
Master Electronics
$0.490
$0.468
Avnet
$0.557
$0.531
TTI Europe
$0.541
Powell Electronics
$0.590
$0.570
Interstate Connecting
$0.665
$0.644
Farnell
$0.533
Element14
$1.060
Bristol Electronics
$1.080
$0.400
$0.281
Flip Electronics
LIBRA Elektronik GmbH
Electro Sonic
$0.483
$0.453
Rutronik
$0.727
$0.706
Component Sense
IBS Electronics
$0.617
$0.575
NAC Semi
$1.050
$0.955
Dan-Mar Components
ComSIT Distribution GmbH
Inventory MP
Atlantic Semiconductor
Sensible Micro Corp
Holdelec - ElecDif-Pro
VNN
Nova Conductors
Ampacity Inc.
$0.289
Perfect Parts
Eastek
$0.110
Kepictronics
Netroflash
Futuretech Components
Continental Prestige Electronics
$0.762
$0.666
Argo Parts USA
Polyethylene insulator material provides excellent electrical insulation properties and resistance to heat, making the connector reliable and durable for telecom and datacom applications.
Nickel shell finish offers corrosion resistance and ensures a long-lasting and reliable connection for data and telecom equipment.
Specifically designed for telecom and datacom applications, this connector is optimized for efficient data transmission and connectivity in such environments.
UL 94V-0 flammability rating indicates that this connector is flame-resistant, enhancing safety and reliability in use in telecom and datacom systems.
4 contacts allow for multiple connections and data pathways, enabling efficient data exchange and communication within a network.
Board mounting type offers secure and stable attachment to circuit boards, ensuring a stable and reliable connection for telecom and datacom equipment.
Copper alloy shell material provides excellent conductivity and durability, ensuring optimal signal transmission and long-term performance in telecom and datacom applications.
Surface mount termination allows for easy and efficient installation without the need for additional soldering, saving time and effort in setting up the connector.
Female contact gender is common in data and telecom connectors, providing compatibility with various male connectors for seamless connections in network setups.
Receptacle body or shell style offers a secure housing for the contacts, protecting them from damage and ensuring a reliable connection for telecom and datacom equipment.
Right angle mounting style allows for space-saving installation in compact or tight spaces, making it ideal for telecom and datacom applications where space is limited.
Telecom & Datacom Connectors 87583-2010RLF attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol Communications Solutions
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mixed Contacts:
Mounting Style:
Mounting Type:
Option:
Shell Finish:
Shell Material:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
87583-2010RLF Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - 8752y series design chg 12/NOV/2019 Design chg 29/OCT/2019
PCN Assembly/Origin - USB2.0 Receptacle Shell Die Design 06/May/2016
Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile Consumer Products, RF, Optical, Broadband and Commercial electronics markets. Amphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment and automotive.
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
Weitron Technology
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
NE555DR
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
L7805CV
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
Meritek Electronics
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
43860-0019
Molex
Molex 43860-0019 Telecom & Datacom Connector features Insulation Resistance of 500MΩ, Rated Current - Signal of 1.5A, and Contact Resistance of 20mΩ. Ideal for board mounting in telecom and datacom applications with UL Flammability Code 94V-0.
6605814-6
Bel Fuse
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Termination Type: SOLDER; Body Length: .725 inch; Minimum Operating Temperature: 0 Cel;
USB-B-S-F-W-TH-FR
Samtec
Samtec USB-B-S-F-W-TH-FR is a USB 2.0 B connector with POLYBUTYLENE TEREPHTHALATE insulator, NICKEL shell finish, and STEEL shell material. It has 4 contacts, operates b/w -50 to 85°C, and offers durability of 1500 cycles. Ideal for telecom & datacom applications requiring right angle mounting on boards with retention clips.
2172034-1
TE Connectivity
TE Connectivity 2172034-1 is a telecom & datacom connector with glass-filled PBT insulator, rated for 1A signal current. Operating temp range: -55 to 85°C. Features nickel-plated shell, right-angle mounting, and solder termination. Ideal for board-mounted applications requiring durability of 5000 cycles.
1-2007394-5
TE Connectivity 1-2007394-5 is a Telecom & Datacom Connector with 8 ports, 160 contacts, and UL 94V-0 flammability rating. It operates b/w -55°C to 105°C, suitable for board mounting applications requiring press fit termination at 0.118" terminal length.
2007562-5
TE Connectivity's 2007562-5 is a Telecom & Datacom Connector with -55 to 105°C operating range, 12 ports, and UL94V-0 flammability rating. It has 240 contacts, press-fit termination, and board mounting for telecom and datacom applications.
5520259-4
TE Connectivity 5520259-4 is a Telecom & Datacom Connector with 0.715" body length, 0.63" width, and 0.65" depth. It has 500M ohm insulation resistance, PBT-POLYESTER insulator material, and operates b/w -40°C to 85°C. Ideal for telecom/datacom applications due to its UL-rated design, polarized housing, and solder termination.
1051330001
Molex 1051330001 USB connector with gold termination, polyethylene insulator, and stainless steel shell. Ideal for telecom/datacom applications with UL standard compliance. Features include 1000000000 ohm insulation resistance, 140VAC dielectric voltage, and -30 to 85°C operating temperature range.
TTL-232RG-VIP-WE
TTL-232RG-VIP-WE by FTDI is a USB connector with 6 contacts, featuring a filter and male contact gender. It is ideal for telecom & datacom applications, offering easy mounting with cable assembly option.
651005136421
Wuerth Elektronik & Kg
651005136421 by Wurth Elektronik is a USB connector with a body length of 0.303", body width of 0.156", and body depth of 0.362". It is commonly used in telecom and datacom applications, offering a rated current of 1A and insulation resistance of 1GΩ.
HDR-E50MSG1+
Honda Tsushin Kogyo
HDR-E50MSG1+ by Honda Tsushin Kogyo is a 50-contact male connector with gold finish, suitable for telecom and datacom applications. Featuring a mating contact pitch of 0.031", insulation resistance of 1G ohm, and rated current of 0.5A, this connector offers reliable performance in commercial settings. Its compact dimensions make it ideal for cable mounting with solder termination, ensuring secure connections in telecommunications systems.
2337993-2
TE Connectivity 2337993-2 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and uses solder termination for board mounting applications.
87520-0010ALF
Amphenol Communications Solutions
The Amphenol Communications Solutions 87520-0010ALF USB connector features a body length of 0.571", insulation resistance of 1G ohm, and dielectric voltage rating of 750VAC. Ideal for telecom applications, this right-angle receptacle has a solder termination type and is rated for 1500 cycles durability.
J3011G21DNL
Pulse Electronics
J3011G21DNL by Pulse Electronics is a Telecom & Datacom Connector with 0.64" Body Length, 0.545" Body Width, and 0.85" Body Depth. It features Tin (Sn) - with Nickel (Ni) Termination Contact Finish and POLYETHYLENE Insulator Material. Ideal for applications requiring a polarized housing, this connector offers 8 contacts for surface mount termination in telecom and datacom systems.
UJC-HP-3-SMT-TR
Cui Devices
USB CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
124018312112A
USB CONNECTOR; Option: WATERPROOF; Contact Gender: FEMALE; IEC Conformity: NO; Filter Feature: NO; Termination Contact Finish: Gold Flash (Au) - with Nickel (Ni) barrier;
RJSAE-5380-02
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Terminal Length: .1 inch; Reference Standard: UL; Insulator Color: BLACK;
UJ31-CH-G1-SMT-TR
Cui
UJ31-CH-G1-SMT-TR by Cui is a USB connector with 24 contacts, gold termination finish, and polyamide insulator material. It is ideal for telecom & datacom applications, featuring a dielectric voltage of 100VAC and operating temperatures ranging from -25 to 85°C. With a durable design lasting up to 10,000 cycles, this right-angle receptacle offers reliable performance in board mounting configurations.
6-2301994-0
TE Connectivity 6-2301994-0 is a EMI shielded connector with Liquid Crystal Polymer insulator. It has 8 contacts, board mounting option, and solder termination type. Ideal for telecom & datacom applications due to its right angle mounting style and UL flammability rating of 94V-0.
89485-8000
The Molex 89485-8000 USB connector features gold termination, glass-filled polyamide insulator, and phosphor bronze contact material. Ideal for telecom/datacom applications, it offers a dielectric voltage of 750VAC and operates at temperatures up to 125°C. With a durability of 1500 cycles, this right-angle receptacle is suitable for board and panel mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
87583-2010BLF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; MIL Conformity: NO; Termination Type: SURFACE MOUNT;
87583-0010BHLF
Amphenol Icc
Amphenol Icc's 87583-0010BHLF is a POLYETHYLENE insulator TELECOM AND DATACOM CONNECTOR with 4 contacts, COPPER ALLOY shell, and UL 94V-0 flammability rating. Ideal for board mounting in telecom and datacom applications requiring surface mount FEMALE connectors with RIGHT ANGLE mounting style.
87583-3010RPALF
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYETHYLENE; Mounting Type: BOARD; Mixed Contacts: NO;
87583-0010RHLF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; MIL Conformity: NO; Mounting Type: BOARD;
87583-2010LF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Insulator Material: POLYETHYLENE; Mounting Type: BOARD;
87583-2010
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 4; Mounting Style: RIGHT ANGLE; Empty Shell: NO;
87583-1010BPH
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Total No. of Contacts: 4; Termination Type: SURFACE MOUNT;
87583-2010BPALF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYETHYLENE; Mixed Contacts: NO; IEC Conformity: NO;
87583-2010BPA
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; UL Flammability Code: 94V-0; DIN Conformance: NO; Shell Material: COPPER ALLOY;
87583-2010BPHLF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD AND PANEL; Mounting Style: RIGHT ANGLE; Termination Type: SURFACE MOUNT;
87583-2010BPH
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Shell Finish: NICKEL; Mounting Style: RIGHT ANGLE;
87583-2010RPALF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD AND PANEL; Mounting Style: RIGHT ANGLE; DIN Conformance: NO;
87583-2010RPA
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Mounting Style: RIGHT ANGLE; Total No. of Contacts: 4;
87583-2010RPHLF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: TIN (100); MIL Conformity: NO; IEC Conformity: NO;
87583-2010RPH
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Shell Material: COPPER ALLOY; Insulator Material: POLYETHYLENE;
87583-3010RPHLF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; IEC Conformity: NO; Total No. of Contacts: 4;
87583-3010RPH
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; DIN Conformance: NO; Empty Shell: NO;
87583-2010BPLF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYETHYLENE; Mounting Type: BOARD; IEC Conformity: NO;
87583-2010RPLF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Material: COPPER ALLOY; UL Flammability Code: 94V-0; IEC Conformity: NO;
87583-3010RPLF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Termination Type: SURFACE MOUNT; Insulator Material: POLYETHYLENE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved