Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
UV PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: J BEND; No. of Terminals: 28; Package Code: WQCCJ; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Native Components
$1.820
Northwest PG Solutions
$2.002
Andel Nordic
$4.556
$4.374
One Stop Electronics
$21.000
Semicontronic
$25.000
$24.375
$24.250
Modulus Dynamics
$47.500
MARBEL Systems
$75.401
$72.385
Texas Native Microelectronics
$86.668
$83.201
$80.601
Kenton Components
$104.002
$91.521
Supply Digital
Corohmni
Corphita
Qasali Group International
$224.643
$205.923
Programmable Logic Devices (PLD) EPS448JC-20 attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Altera
Programmable IC Type:
Organization:
Output Function:
No. of Dedicated Inputs:
No. of I/O Lines:
Maximum Clock Frequency:
Technology:
Additional Features:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Peak Reflow Temperature:
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
Qualified:
EPS448JC-20 Programmable ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
MBR0530T1G
Onsemi
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
Eic Semiconductor
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN65HVD230DR
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ATF16V8C-7JU
Microchip Technology
ATF16V8C-7JU by Microchip Technology is a PLD with 7.5ns propagation delay, 18 inputs, and 64 product terms. It is used in applications requiring high-speed processing and features a max clock frequency of 100MHz. The device operates at industrial temperatures ranging from -40 to 85°C.
M4A5-64/32-12VNI48
Lattice Semiconductor
M4A5-64/32-12VNI48 by Lattice Semiconductor is a PLD with 64 macro cells, 34 inputs, and 32 outputs. It operates at a max supply voltage of 5.5V with a propagation delay of 12ns. Ideal for applications requiring programmable ICs in industrial settings due to its PAL-type architecture and JTAG boundary scan test capability.
ATF22V10B-15GM/883
ATF22V10B-15GM/883 by Microchip Technology is a 5.5V PLD with 15ns propagation delay, ideal for MIL-STD-883 applications. Featuring CMOS technology, it offers 22 inputs and 10 I/O lines in a ceramic package suitable for military-grade environments at temperatures ranging from -55 to 125°C.
EPM3128ATC100-5N
Intel
EPM3128ATC100-5N by Intel is a 128 macrocell EE PLD with 80 I/O lines, operating at a max clock frequency of 192.3 MHz. It features a propagation delay of 5 ns and can be used for in-system programmable applications requiring fast processing speeds and high I/O capabilities.
LC4256V-75TN176C
LC4256V-75TN176C by Lattice Semiconductor is a 3.3V EE PLD with 256 macro cells, 132 inputs, and 128 I/O lines. With a propagation delay of 7.5 ns and max clock frequency of 111 MHz, it's ideal for applications requiring fast processing speeds in programmable logic devices. The device is surface mountable and features JTAG boundary scan test capability for efficient testing processes.
EPM7128AETC100-10N
Intel's EPM7128AETC100-10N is a 128 macrocell EE PLD with 10ns propagation delay, operating at max 98MHz clock frequency. Ideal for applications requiring in-system programmability and output function from macrocells. Features include CMOS technology, 3.6V supply voltage, and JTAG boundary scan test capability.
XC2C64A-7VQ44C
Xilinx
XC2C64A-7VQ44C by Xilinx is a 64 macrocell FLASH PLD with 7.5 ns propagation delay, operating at 200 MHz clock frequency. Ideal for applications requiring in-system programmability and featuring 33 I/O lines, it uses CMOS technology and has a max supply voltage of 1.9 V.
EPM7064SLC44-10N
Altera
The EPM7064SLC44-10N by Altera is a programmable logic device with 64 macro cells. It has a propagation delay of 10 ns and a maximum supply voltage of 5.25 V. This CMOS device is surface mountable and in-system programmable. Its application includes output function as macrocell and it can operate at a maximum clock frequency of 125 MHz.
SLG46110V
Silego Technology
OT PLD; Form Of Terminal: NO LEAD; No. of Terminals: 12; Package Code: VQCCN; Package Shape: SQUARE; Maximum Supply Voltage: 1.89 V;
EPF10K20RI208-4N
EPF10K20RI208-4N by Intel is a PLD with 1152 logic cells, 0.6 ns propagation delay, and 147 inputs/outputs. Ideal for industrial applications requiring high clock frequency of 67.11 MHz, operating temperature range from -40 to 85 °C, and low power consumption at supply voltages of 3.3/5 V.
ATF22V10CZ-12PC
Atmel
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
XCR3128XL-10VQ100C
The Xilinx XCR3128XL-10VQ100C is a programmable logic device with 128 macro cells. It operates on a max supply voltage of 3.6V and has a propagation delay of 10ns. This PLD is commonly used for applications requiring in-system programmability and a clock frequency of up to 95MHz.
EPM7128SLC84-15N
Intel's EPM7128SLC84-15N is a 128 macrocell EE PLD with 15ns propagation delay, operating at up to 100MHz. It features in-system programmability and JTAG boundary scan test for versatile applications in commercial environments. With a package style of chip carrier and square shape, it offers 68 I/O lines and operates within a temperature range of 0-70°C.
5M80ZM68C5N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 68; Package Code: TFBGA; Package Shape: SQUARE;
EPM7032SLC44-6N
The Altera EPM7032SLC44-6N is a 32 macrocell EE PLD with 36 I/O lines, operating at up to 200 MHz. It features a propagation delay of 6 ns and can be in-system programmable. This Programmable Logic Device is commonly used in applications requiring high-speed digital processing and control.
EPM7128AETI100-7N
The EPM7128AETI100-7N by Altera is a programmable logic device with 128 macro cells. It has a propagation delay of 7.5 ns and can operate at a maximum supply voltage of 3.6 V. This PLD is surface mountable and uses CMOS technology. Its applications include digital logic designs, data processing, and control systems.
EPM7128STI100-10N
The EPM7128STI100-10N by Altera is a programmable logic device with 128 macro cells. It has a propagation delay of 10 ns and can operate at a maximum clock frequency of 125 MHz. The device supports in-system programming and has 84 I/O lines. It can be powered by 3.3V or 5V supplies and is compatible with CMOS technology. It is commonly used in industrial applications.
XC95288XL-6FGG256C
The Xilinx XC95288XL-6FGG256C is a FLASH PLD with 288 macro cells, 192 inputs/outputs, and a max clock frequency of 208.3 MHz. It is ideal for applications requiring fast propagation delay of 6 ns, such as high-speed digital signal processing and communication systems. The device features in-system programmability and JTAG boundary scan test capabilities for efficient development and testing processes.
XC2C128-7TQG144C
The Xilinx XC2C128-7TQG144C is a 128 macrocell FLASH PLD with 100 I/O lines, 7.5 ns propagation delay, and 119 MHz max clock frequency. Ideal for applications requiring in-system programmability, such as digital signal processing and telecommunications systems.
LC4256ZE-7TN144C
LC4256ZE-7TN144C by Lattice Semiconductor is a 256 macrocell EE PLD with 7.5 ns propagation delay, suitable for applications requiring in-system programmability and 111 MHz clock frequency. With 96 I/O lines, 0.5 mm terminal pitch, and matte tin finish, it offers versatile functionality in compact form factor for various electronic designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EPS448LC28-16
OT PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
EPS448DM28-20
UV PLD; Grading Of Temperature: MILITARY; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 28; Package Code: WDIP; Package Shape: RECTANGULAR;
EPS448DC28-25
UV PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 28; Package Code: WDIP; Package Shape: RECTANGULAR;
EPS448LC-20
EPS448JC-25
EPS448DI28-20
UV PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 28; Package Code: WDIP; Package Shape: RECTANGULAR;
EPS448LC28-20
EPS448DC-25
EPS448DC28-25A
EPS448JM-20
UV PLD; Grading Of Temperature: MILITARY; Form Of Terminal: J BEND; No. of Terminals: 28; Package Code: WQCCJ; Package Shape: SQUARE;
EPS448JC-30
EPS448DI-20
EPS448LC-25
EPS448DC28-20
EPS448DM-20
EPS448DC-20
EPS448DC28-16
EPS448DC-30
EPS448JI-20
UV PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 28; Package Code: WQCCJ; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved