Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 256; Package Code: LBGA; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
VNN
Nova Conductors
Ampacity Inc.
$7.000
One Stop Electronics
$11.000
AZTECH Wire
$11.168
Semicontronic
$32.000
$31.200
$31.040
Texas Native Microelectronics
$128.052
$122.930
$119.088
$112.686
Modulus Dynamics
$135.492
MARBEL Systems
Supply Digital
Corphita
Kenton Components
$134.197
Bastille Electronics
Corohmni
Qasali Group International
$331.911
$304.252
Programmable Logic Devices (PLD) 5M2210ZF256C4 attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Altera
Programmable IC Type:
In-System Programmable:
Organization:
Output Function:
No. of Macro Cells:
No. of I/O Lines:
Maximum Clock Frequency:
Propagation Delay:
Technology:
Sub-Category:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
JTAG Boundary Scan Test:
Qualified:
5M2210ZF256C4 Programmable ICs trade compliance attributes, and parameters.
ECCN
3A991.D
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Mult Dev Software Chgs 3/Jun/2021 Quartus SW/Web Chgs 23/Sep/2021
PCN Packaging - Mult Dev Label CHG 24/Jan/2020 Mult Dev Label Chgs 24/Feb/2020
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Synsemi
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
Sangdest Microelectronics (Nanjing)
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Comchip Technology
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
Bkc Semiconductors
ATF22V10CQZ-20SU
Atmel
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
EPF10K100ARI240-3N
Intel
Intel's EPF10K100ARI240-3N is a PLD with 4992 logic cells, 0.8 ns propagation delay, and 189 inputs/outputs. It operates at 3.3V nominal voltage and -40 to 85°C temperature range. Ideal for industrial applications requiring high-speed data processing in compact designs.
5962-8867005LA
Defense Logistics Agency
Defense Logistics Agency's 5962-8867005LA is a MIL-STD-883 compliant PLD with 15ns propagation delay, 5.5V max supply voltage, and CMOS technology. It features 11 dedicated inputs, 10 I/O lines, and operates b/w -55 to 125 °C. Ideal for military applications requiring high-speed processing in harsh environments.
LC4032V-75TN48I
Lattice Semiconductor
LC4032V-75TN48I by Lattice Semiconductor is a 32 macrocell EE PLD with 36 inputs and 32 I/O lines. It has a propagation delay of 7.5 ns, operates at a max clock frequency of 111 MHz, and can be in-system programmable. Ideal for applications requiring fast processing speeds and versatile input/output configurations.
XC2C64A-5CP56C
Xilinx
FLASH PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: BALL; No. of Terminals: 56; Package Code: LFBGA; Package Shape: SQUARE;
ATF16V8BQL-15JU
Microchip Technology
ATF16V8BQL-15JU by Microchip Technology is a 5.5V CMOS PLD with 15ns propagation delay, ideal for industrial applications. Featuring 18 inputs, 8 I/O lines, and 8 outputs, it operates at up to 45MHz clock frequency in temperatures ranging from -40°C to 85°C.
LC4256ZE-7TN100C
LC4256ZE-7TN100C by Lattice Semiconductor is a 256 macrocell EE PLD with 7.5 ns propagation delay and 111 MHz clock frequency. Ideal for applications requiring in-system programmability, it features 64 I/O lines, matte tin terminals, and a low-profile flatpack package shape.
LC4512V-75FTN256C
LC4512V-75FTN256C by Lattice Semiconductor is a 512 macrocell EE PLD with 212 inputs and 208 I/O lines. It has a max clock frequency of 111 MHz and can operate at temperatures up to 90°C. This programmable logic device is suitable for applications requiring high-speed data processing and control.
EPF10K20TI144-4N
Altera
LOADABLE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
EPM240T100I5N
FLASH PLD; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE; Output Function: MACROCELL;
ATF22V10CZ-15PI
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
5M80ZM68C5N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 68; Package Code: TFBGA; Package Shape: SQUARE;
EPM7128SQI100-10N
The Intel EPM7128SQI100-10N is a 128 macrocell EE PLD with 84 I/O lines, operating at up to 125 MHz. It features a propagation delay of 10 ns and can be in-system programmable. Ideal for industrial applications requiring high-speed logic processing within a temperature range of -40 to 85°C.
5M1270ZF324C5N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 324; Package Code: LBGA; Package Shape: SQUARE;
EPM3128ATC144-7N
EPM3128ATC144-7N by Intel is a 128 macrocell EE PLD with 96 I/O lines, operating at up to 129.9 MHz clock frequency. It features a propagation delay of 7.5 ns and can be in-system programmable for various applications requiring fast processing speeds and high I/O capabilities. The device comes in a square-shaped plastic/epoxy package with gull wing terminals, making it suitable for commercial-grade projects needing reliable programmable logic devices.
EPM570GT100C5N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
EPF8452ALI84-4
EPF8452ALI84-4 by Intel is a PLD with 336 logic cells, 68 inputs, and 64 I/O lines. It operates at voltages of 3.3/5,5V and has a temperature range of -40 to 85°C. Ideal for industrial applications requiring high-performance programmable logic solutions in compact form factors.
EPM7192SQI160-10N
EPM7192SQI160-10N by Intel is a 192 macrocell EE PLD with 10 ns propagation delay, suitable for industrial applications. It operates at a max clock frequency of 125 MHz and has 124 I/O lines, making it ideal for high-speed digital designs requiring programmable logic devices. The device features in-system programmability and JTAG boundary scan test capability, ensuring easy integration and efficient testing processes.
EPF10K50RC240-3N
EPF10K50RC240-3N by Intel is a PLD with 2880 logic cells, 0.6 ns propagation delay, and 66.67 MHz max clock frequency. Ideal for applications requiring high-speed data processing and complex logic operations in commercial-grade environments.
XCR3256XL-10TQG144C
Xilinx XCR3256XL-10TQG144C is a 256 macrocell EE PLD with 120 I/O lines, operating at up to 105 MHz. It features a propagation delay of 10 ns and can be in-system programmable. Ideal for applications requiring high-speed processing and versatile I/O capabilities in commercial-grade environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5M2210ZF256C5N
Intel's 5M2210ZF256C5N is a PLD with 1700 macro cells, 203 inputs/outputs, and 201.1 MHz clock frequency. Ideal for applications requiring fast propagation delay of 11.2 ns, such as high-speed digital designs or signal processing systems. Features include in-system programmability and JTAG boundary scan testing for efficient development and debugging processes.
5M2210ZF256I5N
Intel's 5M2210ZF256I5N is a FLASH PLD with 1700 macro cells, 203 I/O lines, and 201.1 MHz clock frequency. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing capabilities.
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: BALL; No. of Terminals: 256; Package Code: LBGA; Package Shape: SQUARE;
5M2210ZF324C5N
The Altera 5M2210ZF324C5N is a programmable logic device (PLD) with a package body material of plastic/epoxy. It has a propagation delay of 11.2 ns and can be surface mounted. The maximum supply voltage is 1.89 V and it uses CMOS technology. With 1700 macro cells, it is suitable for flash PLD applications.
5M2210ZF256C4N
5M2210ZF324I5N
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: BALL; No. of Terminals: 324; Package Code: LBGA; Package Shape: SQUARE;
5M2210ZF256A5N
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: BALL; No. of Terminals: 256; Package Code: BGA; Package Shape: SQUARE;
5M2210ZF256C5
5M2210ZF256I5
5M2210ZF324A5N
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: BALL; No. of Terminals: 324; Package Code: BGA; Package Shape: SQUARE;
5M2210ZF324C4
5M2210ZF324C4N
5M2210ZF324C5
5M2210ZF324I5
Intel's 5M2210ZF256I5 is a FLASH PLD with 1700 macro cells, 203 I/O lines, and max clock frequency of 201.1 MHz. Ideal for industrial applications requiring high-speed data processing and low power consumption. Features JTAG boundary scan test for efficient debugging and in-system programmability for flexibility.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved