Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY;
Median Price
$0.179
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Electroshield
1+ parts
$0.010
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$0.180
$0.150
Powell Electronics
Master Electronics
$0.146
Verical
$0.231
$0.219
Galco
$0.130
Electro Sonic
$0.169
$0.121
IBS Electronics
$0.177
$0.171
Bisco
Hawk Electronics
$0.110
$0.105
Argo Parts USA
Netroflash
Assembly Products 2841.0 attributes and parameters. Explore more Assembly Products devices from Altech
Connector Accessory Type:
Altech Corporation is a Supplier and Distributor of Electronic and Control Components. Our product line includes Terminal Blocks, Fuses, Circuit Breakers, Disconnect Switches, Inductive Proximity Sensors, Industrial Enclosures, DIN Enclosures, Interface Modules, Foot Switches, Liquid Tight Strain Reliefs, Safety Relays, European Fuses, PIN & Sleeve Devices, Power Supplies and Wire Ducts.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
Taitron Components
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
LM7805CT
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Good-ark Electronics
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
5916G6-BK
Anderson Power Products
The Anderson Power Products 5916G6-BK housing is made of polycarbonate, rated for 600V AC/DC. It can accommodate wires up to 6 AWG and operates b/w -20°C to 105°C. Approved by CSA, CUL, UL, it's ideal for electrical assembly applications.
43030-0038
Molex
CONNECTOR ACCESSORY; Manufacturer Series: 43030;
1375801-1
TE Connectivity
TE Connectivity 1375801-1 shroud with UL approval, max temp of 105°C, min temp of -55°C. Ideal for assemblies requiring POLYBUTYLENE TEREPHTHALATE material and accommodating up to 0 AWG wire size.
0462-005-20141
TE Connectivity's 0462-005-20141 is a CRIMP terminal with MACHINED contact design. It supports wire gauge up to 16 AWG, rated for 7.5A current. Ideal for applications requiring FEMALE contact gender and ROUND PIN-SOCKET style in straight mounting setup.
181270-2
TE Connectivity's 181270-2 CONTACT features CRIMP terminal type, rated voltage of 40V, and wire gauge of 23 AWG. Ideal for SIGNAL applications with a max operating temperature of 80°C and contact resistance of 7 mΩ.
D38999/33Z17N
CONNECTOR ACCESSORY; Material: METAL; Maximum Operating Temperature: 175 Cel; Maximum Wire Size: 0 AWG; Shell Sizes: 17; Minimum Operating Temperature: -65 Cel;
194200002
Molex 194200002 is a female contact with crimp terminal type, suitable for 19418 series receptacle housing. It has a finish thickness of 75 units and supports wire sizes from 22 AWG to 18 AWG. The contact design is strip made of copper alloy material with a length of 0.295 inch, ideal for straight mounting applications.
1-968849-1
TE Connectivity's 1-968849-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 15A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.051 to 0.083 inch.
3341-1S
3m Electronic Products Division
The 3m Electronic Products Division's 3341-1S JACK SCREW is made of steel, with a straight mounting style and #4-40 screw option. It has a terminal length of 7.9 inches, ideal for assembly applications requiring secure fastening in electronic devices.
9004320000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; Maximum Wire Size: 17 AWG; IEC Conformity: NO; Approvals (V): CSA; GOST; DIN Conformity: NO; Assembly Item Name: FERRULE;
BVH-21T-P1.1
J S T Mfg
BVH-21T-P1.1 by J S T Mfg is a CRIMP terminal CONTACT with 22-18 AWG wire size range, rated for 250V AC/DC. Made of PHOSPHOR BRONZE, it operates b/w -25 to 85 °C, ideal for applications requiring FEMALE contacts and 0.067" cable entry.
5206514-1
TE Connectivity's 5206514-1 LOCKING POST KIT features a Finish Thickness of 400, Max Wire Size of 0 AWG, and Material made of STEEL. Ideal for applications requiring secure assembly with Mounting Options: #4-40 SCREW.
12045773
Delphi Connection Systems
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Terminal Type: CRIMP; DIN Conformity: NO; Maximum Cable Entry: .109 inch; IEC Conformity: NO;
F22891-000
DT06-12SC-C017
TE Connectivity's DT06-12SC-C017 is a power and signal assembly product with a rated voltage of 250V and a max operating temperature of 125°C. With a rated current of 13A, it is designed for applications requiring female contact gender and can handle up to 250V DC voltage.
AT06-2S-CAP
Amphenol
50394-8052
Molex 50394-8052 is a crimp terminal with chain contact design, suitable for assembly products. It supports wire sizes from 30 AWG to 24 AWG and has a max cable entry of 0.055". The bellowed contact is made of phosphor bronze, ideal for applications requiring female contacts in straight mounting style.
48099-4000
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 80 Cel; DIN Conformity: NO; IEC Conformity: NO; Usage: 67910-0002;
08-70-0043
Molex 08-70-0043 is a CRIMP male CONTACT with STRAIGHT mounting style. Features RND PIN-SKT contact style made of BRASS. Ideal for assembly products requiring reliable electrical connections in various applications.
13711542
CONNECTOR ACCESSORY; Cable Types: FLRY-B; Material: COPPER ALLOY; Maximum Cable Entry: .063 inch; Assembly Item Name: CONTACT; Minimum Cable Entry: .0472 inch;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
284107-1
CONNECTOR ACCESSORY; Rated Current: 14 A; Minimum Cable Entry: .075 inch; Maximum Wire Size: 15 AWG; Wire Gauge (AWG): 15; Contact Design: STAMPED;
284108-1
CONNECTOR ACCESSORY; Rated Current: 14 A; Contact Gender: MALE; Contact Design: STAMPED; Maximum Operating Temperature: 105 Cel; Minimum Cable Entry: .106 inch;
284109-1
CONNECTOR ACCESSORY; Rated Current: 14 A; Terminal Type: CRIMP; Minimum Wire Size: 18 AWG; Minimum Operating Temperature: -30 Cel; Contact Design: STAMPED;
284166-2
CONNECTOR ACCESSORY; Rated Current: 14 A; Minimum Cable Entry: .098 inch; Terminal Type: CRIMP; Maximum Operating Temperature: 105 Cel; Contact Gender: FEMALE;
2841-7-9016
CONNECTOR ACCESSORY; Rated Current: 5 A; Contact Gender: MALE; Maximum Operating Temperature: 200 Cel; Minimum Wire Size: 18 AWG; Cross Section Area: 1.5 mm2;
284136-1
CONNECTOR ACCESSORY; Maximum Operating Temperature: 120 Cel; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -40 Cel; Wire Gauge (AWG): 0;
284136-2
CONNECTOR ACCESSORY; Manufacturer Series: 284136;
284137-1
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Operating Temperature: 120 Cel; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 0 AWG;
284138-1
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
284142-1
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 125 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
2841-5-9000
CONNECTOR ACCESSORY; Rated Current: 5 A; Wire Gauge (AWG): 22; Minimum Cable Entry: .039 inch; Cross Section Area: .34 mm2; Maximum Wire Size: 22 AWG;
2841-5-14300
CONNECTOR ACCESSORY; Rated Current: 5 A; Maximum Cable Entry: .054 inch; Minimum Wire Size: 26 AWG; Mounting Option-1: LOCKING; Additional Features: CONTACT FINISH: GOLD OVER NICKEL;
Altech
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved