Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Alpha Wire's 6719WH001 is a stranded electrical wire with CE, CSA, and UL approvals. Featuring a tin finish copper alloy conductor, it has a rated voltage of 600V and operates b/w -40 to 105°C. Ideal for flexible cord and fixture wire applications due to its construction and temperature range suitability.
Median Price
$2,561.630
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Master Electronics
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Nova Conductors
$2,269.410
Electro Sonic
$2,415.920
IBS Electronics
$3,607.062
Vyrian
VNN
Aztec Data Supply Inc.
$2.690
AZTECH Wire
$10.398
Ampacity Inc.
$1,963.570
Semicontronic
$1,914.481
$1,904.663
Continental Prestige Electronics
$2,224.022
Argo Parts USA
$2,246.716
$2,201.328
Netroflash
The multiple approvals ensure that this electrical wire is safe and reliable for use in various applications.
Stranded construction allows for flexibility and durability, making this wire easy to work with and resistant to breakage.
With a high rated voltage, this wire is suitable for use in a wide range of electrical systems and devices.
The tin finish on the conductor helps improve conductivity and corrosion resistance, ensuring a long lifespan for the wire.
The insulator material provides excellent heat resistance and insulation properties, making this wire suitable for high-temperature environments.
With a high maximum operating temperature, this wire can withstand elevated temperatures without degradation, ensuring reliable performance.
The low minimum operating temperature allows this wire to remain flexible and functional in cold environments.
The 10 AWG wire gauge provides a good balance between current-carrying capacity and flexibility, making this wire suitable for a variety of applications.
The compact diameter of this wire makes it easy to route and install in tight spaces, saving time and effort during installation.
With a standard length of 304.8 mm, this wire is suitable for a wide range of electrical projects and installations.
The stranding configuration of 105X30 provides excellent flexibility and durability, ensuring that this wire can withstand repeated bending and twisting.
The large cross-section area allows for efficient current flow and reduced voltage drop, making this wire suitable for high-current applications.
The copper alloy conductor offers excellent conductivity and corrosion resistance, ensuring reliable performance over time.
The low resistance of 0.004 ohm minimizes power loss and heat generation, making this wire energy-efficient and cost-effective.
This wire type is versatile and can be used in a variety of applications, providing flexibility and ease of installation.
Electrical Wires & Cables 6719WH001 attributes and parameters. Explore more Electrical Wires & Cables devices from Alpha Wire
Approvals (V):
Conductor Finish:
Conductor Material:
Connector Accessory Type:
Construction:
Cross Section Area:
DIN Conformity:
Diameter:
IEC Conformity:
Insulator Material:
Length:
MIL Conformity:
No. of Conductors:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Voltage:
Resistance:
Shielding:
Stranding:
Wire Gauge (AWG):
Wire & Cable Name:
Founded in New York City in 1922 as a supplier of wire strengtheners to the millinery industry (women’s hats), Alpha Wire grew to become a valued supplier to the expanding radio industry throughout the 1930s by producing wire and insulators for antennas. In the decades that followed, the business was propelled by the defense industry’s needs for electronics during World War II, and by the advent of television. Enhancements to Alpha’s broad portfolio continued to the end of the 20th century and the beginning of the 21st century. Innovations included the introduction of superior flex capabilities and the development of EcoWire®, the industry’s first smaller, lighter, and zero-halogen hook-up wire. That development was followed by the acquisition of COAST in 2014, which expanded Alpha’s capabilities to include custom cables. From its manufacturing facilities throughout the U.S., and offices and distribution centers in the U.S., UK, China, and Hong Kong, Alpha Wire provides an extensive selection of cable, wire, heat-shrink tubing, accessories, and wire management services to customers worldwide in the Industrial Automation, Medical, Semiconductor, Aerospace & Defense, Consumer Electronics, and Energy markets.
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
Central Semiconductor
Unitrode
2N2222A
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3203C
Idec
ROTARY SWITCH;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
Promax-johnton
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
44A0111-22-911
TE Connectivity's 44A0111-22-911 wire is MIL-W-81044 approved with a 600V rating. Featuring stranded construction, radiation-crosslinked PVF jacket, and tin finish copper alloy conductor, it operates b/w -65 to 135 °C. Ideal for applications requiring flexible cord and fixture wire up to 0 AWG size.
9746060500
Belden
WIRE AND CABLE;
P046-06N-T
Tripp Lite
CABLE ASSEMBLY;
5875WH005
Alpha Wire
Alpha Wire's 5875WH005 is a stranded electrical wire with silver finish, rated at 1000V. Featuring PTFE insulation, it operates b/w -60 to 200°C. Ideal for flexible cords and fixtures due to its copper alloy conductor, 0.326mm² cross-section area, and 0.046 ohm resistance.
1415898
Phoenix Contact
55A0111-28-3
TE Connectivity's 55A0111-28-3 wire is a stranded copper alloy cable with 28 AWG and rated for 600V. With a temperature range of -65 to 150 °C, it is ideal for general purpose and lightweight applications like flexible cords and fixtures.
3365/40300
3m Electronic Products Division
3077GR005
Alpha Wire 3077GR005 is a CE, CSA, and UL approved stranded wire with 600V rating. Featuring tin finish copper alloy conductor, PVC insulation, it operates b/w -40 to 105°C. Ideal for flexible cord and fixture wiring applications due to its 16 AWG gauge and 1.309 mm² cross-sectional area.
M81044/12-20-91
1700/14100
1700/14100 by 3M Electronic Products Division is a UL and CUL approved stranded flat cable with 14 copper alloy conductors. Featuring a tin finish, PVC insulation, and rated for up to 300V, it's ideal for electrical wiring applications requiring flexibility and durability in temperatures ranging from -20°C to 105°C.
898410021000
6713GR013
Alpha Wire 6713GR013 is a stranded wire with tin finish, rated at 600V. Constructed with modified polyphenylene ether insulator, it operates b/w -40 to 105°C. Ideal for flexible cord and fixture wire applications due to its copper alloy conductor and CE/CSA/UL approvals.
34160
Helukabel
WIRE AND CABLE; Rated Voltage: 225 V; Shielding: YES; Diameter: 13 mm; Maximum Operating Temperature: 70 Cel; Cross Section Area: .8 mm2;
M22759/32-22-0
Allied Wire & Cable
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; IEC Conformity: NO; Construction: STRANDED; Insulator Material: CROSS-LINKED ETFE;
A-MCSP-80010/B
Assmann Wsw Components
A-MCSP-80010/B by Assmann Wsw Components is a 26 AWG stranded cable with PVC jacket, 5.2mm diameter, and 10mm length. It features RJ45 plugs on both ends, 0.13 mm2 cross-section area, and 8 conductors. Ideal for communication, control, and power-limited applications.
CW5505-000
PMHDMF-2
L-com
135101-02-M1.00
Amphenol
1165940002
Weidmueller & Kg
31894
Wentronic
CABLE ASSEMBLY; Connector Side-1: HDMI 19P MALE; Connector Side-2: HDMI 19P MALE; Rated Voltage: 300 V; Shielding: NO; Wire & Cable Name: COMMUNICATION CABLE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
6719GY005
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; IEC Conformity: NO; Diameter: 3.66 mm; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE;
6719SL005
Alpha Wire 6719SL005 is a CE, CSA, and UL approved stranded wire with 600V rating. Featuring tin finish copper alloy conductor, it has a cross section area of 5.261 mm2 and operates b/w -40 to 105 °C. Ideal for flexible cord and fixture wire applications.
6719VI005
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Conductor Material: COPPER ALLOY; Conductor Finish: TIN; Cross Section Area: 5.261 mm2;
6719BR005
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Minimum Operating Temperature: -40 Cel; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Maximum Operating Temperature: 105 Cel;
6719WH005
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; IEC Conformity: NO; Diameter: 3.66 mm; DIN Conformity: NO;
6719BK005
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; No. of Conductors: 1; Maximum Operating Temperature: 105 Cel; IEC Conformity: NO;
6719BR001
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Approvals (V): CE; CSA; UL; Wire Gauge (AWG): 10; IEC Conformity: NO;
6719BL001
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Conductor Finish: TIN; Insulator Material: POLYPHENYLENE ETHER; Minimum Operating Temperature: -40 Cel;
6719GR005
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Insulator Material: POLYPHENYLENE ETHER; IEC Conformity: NO; Diameter: 3.66 mm;
6719GY001
Alpha Wire's 6719GY001 is a CE, CSA, and UL approved stranded wire with tin finish. Featuring polyphenylene ether insulation, it operates b/w -40 to 105°C with a 600V rating. Ideal for flexible cord and fixture wire applications due to its copper alloy conductor and 10 AWG size.
6719YL001
Alpha Wire 6719YL001 is a CE, CSA, and UL approved stranded wire with a rated voltage of 600V. Featuring tin-coated copper alloy conductor, it has an operating temperature range from -40 to 105°C. Ideal for flexible cord and fixture wire applications due to its construction and cross-sectional area of 5.261mm².
6719YL005
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; DIN Conformity: NO; Length: 30.48 mm; Insulator Material: POLYPHENYLENE ETHER;
6719
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Cross Section Area: 5.37 mm2; Minimum Operating Temperature: -40 Cel; IEC Conformity: NO;
6719OR001
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Stranding: 105X30; Maximum Operating Temperature: 105 Cel; Length: 304.8 mm;
6719SL001
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; IEC Conformity: NO; Cross Section Area: 5.261 mm2; Stranding: 105X30;
6719GR010
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Construction: STRANDED; Maximum Operating Temperature: 105 Cel; Length: 762 mm;
6719OR010
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Maximum Operating Temperature: 105 Cel; Resistance: .004 ohm; Minimum Operating Temperature: -40 Cel;
6719VI010
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Minimum Operating Temperature: -40 Cel; Length: 762 mm; Conductor Material: COPPER ALLOY;
6719WH010
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Resistance: .004 ohm; Minimum Operating Temperature: -40 Cel;
6719OR005
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Maximum Operating Temperature: 105 Cel; DIN Conformity: NO; No. of Conductors: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved