Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Allegro MicroSystems' A1104LUA-T is a Hall effect magnetic field sensor with 3 terminals, offering voltage output. It operates b/w -40 to 150°C and can detect magnetic fields ranging from 2.5 to 45 mT. With AEC-Q100 screening, it's ideal for automotive applications requiring precise magnetic field measurements.
Median Price
$1.510
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$1.110
1k+ parts
$1.010
10k+ parts
$0.955
DigiKey
$1.740
$1.265
$1.155
Rochester
-
$0.878
$0.729
$0.649
Vyrian
Matronic GmbH & Co. Electronic-Vertriebs
VNN
Chip Stock
Jameco Electronics
Kallista Electronics Ltd
Nova Conductors
Ampacity Inc.
$0.610
Semicontronic
$0.595
$0.592
Aztec Data Supply Inc.
$1.600
Corohmni
$1.786
Advanced Electronics
$2.115
$2.009
Kepictronics
Argo Parts USA
Perfect Parts
Continental Prestige Electronics
Bastille Electronics
Allows for a wide range of applications and compatibility with different power sources.
Ensures high reliability and quality for automotive applications.
Provides accurate and reliable magnet detection with a low error margin.
Compact size for easy integration into various systems and devices.
Utilizes Hall Effect technology for precise magnetic field measurements.
Simple and efficient wiring setup for easy installation and use.
Low profile design for space-constrained applications.
Standard shape for easy mounting and integration into existing designs.
Works effectively with lower power sources for energy efficiency.
Can withstand high temperature environments for versatile use cases.
Provides a voltage signal for easy interfacing with other electronic components.
Suitable for operation in extreme cold conditions without loss of performance.
Corrosion-resistant finish for long-lasting durability.
Low power consumption for energy efficiency and extended battery life.
Detects a wide range of magnetic fields for versatile applications.
Utilizes BiCMOS technology for efficient signal processing and power management.
Detects a wide range of magnetic fields for diverse applications.
Secure and reliable connection for stable performance.
Easy installation on PCBs for convenient integration into electronic systems.
Magnetic Field Sensors A1104LUA-T attributes and parameters. Explore more Magnetic Field Sensors devices from Allegro MicroSystems
Additional Features:
Body Width:
Body Height:
Body Length/Diameter:
Hysteresis:
Maximum Magnetic Field Range:
Minimum Range Of Magnetic Field:
Mounting Feature:
No. of Terminals:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Type:
Package Equivalence Code:
Package Shape or Style:
Screening Level:
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Technology:
Terminal Finish:
Termination Type:
A1104LUA-T Sensors & Transducers trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - A11/A12 24/Aug/2016
PCN Packaging - Tape Change 27/Jan/2023
With more than 30 years of experience developing advanced semiconductor technology and application-specific algorithms, Allegro is a global leader in power and sensing solutions for motion control and energy-efficient systems. Through our innovations in e-Mobility, Clean Energy, and Automation, we are helping move the world toward a safer, more sustainable future. Each year we ship over one billion units into these applications to support our 10,000+ customers around the globe, including over 50 automotive OEMs. Our global engineering, manufacturing and support, combined with our agility, make Allegro a trusted partner to both large enterprises and regional market leaders worldwide.
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
Multicomp Pro
Weitron Technology
Rectron
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
SI7217-B-01-IVR
Silicon Labs
MAGNETIC FIELD SENSOR,HALL EFFECT; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);
PTMAG5170A1EDGKQ1
PTMAG5170A1EDGKQ1 by Texas Instruments is a 3-axis magnetic field sensor with a digital current output range of -2-2mA. It operates b/w -40 to 150°C, suitable for automotive applications due to AEC-Q100 screening and SPI interface. The sensor has a compact square package body made of plastic/epoxy, ideal for surface mounting in tight spaces.
DRV5032FBDBZR
DRV5032FBDBZR by Texas Instruments is a magnetic field sensor with a max supply voltage of 5.5V and hysteresis of 1.5mT. It is commonly used in applications such as hall effect sensors, where it provides a digital current output range of -5.0-5.0mA for detecting magnetic fields ranging from 0.5mT to 4.8mT.
TLE4998C8DXUMA2
Infineon Technologies
MAGNETIC FIELD SENSOR,HALL EFFECT;
A1220ELHLT-T
Allegro MicroSystems
Allegro MicroSystems' A1220ELHLT-T is a magnetic field sensor with 3-24V supply, -40 to 85°C operating temp, and 4.5mT hysteresis. Ideal for current output applications like automotive systems, industrial controls, and consumer electronics due to its compact rectangular design and high sensitivity.
DRV5023BIQDBZT
DRV5023BIQDBZT by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.5V to 38V and hysteresis of 8.5mT. It operates in temperatures from -40°C to 125°C, offering an output range of 0-38V via open-drain interface. Ideal for applications requiring precise digital voltage output based on magnetic field detection.
DRV5055A3QLPGM
Texas Instruments' DRV5055A3QLPGM is a magnetic field sensor with 3-3.63V supply voltage range, -40 to 125°C operating temperature, and -1-1mA analog current output. Ideal for applications requiring precise Hall effect sensing in a compact 4x1.52x5.05mm rectangular package with through-hole mounting.
DRV5032FBLPGM
DRV5032FBLPGM by Texas Instruments is a magnetic field sensor with 1.5 mT hysteresis, -40 to 85°C operating temperature range, and 5.5V max supply voltage. Ideal for applications requiring digital current output, such as proximity sensing in industrial automation systems.
A1101ELHLT-T
Allegro MicroSystems' A1101ELHLT-T is a magnetic field sensor with 24V max supply voltage, -40 to 85°C operating temp range, and 5.5mT hysteresis. Ideal for automotive applications due to AEC-Q100 screening level, BICMOS technology, and 17.5mT max magnetic field range.
TLE4998S8DXUMA1
TLE4998S8DXUMA1 by Infineon is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 125°C operating temperature, and 0-5mA digital current output. Ideal for applications requiring precise magnetic field detection in a compact rectangular package design for surface mount assembly.
S-5716ACDL1-I4T1U
Ablic
Ablic's S-5716ACDL1-I4T1U is a magnetic field sensor with 5.5V max supply voltage, 0.8 mT hysteresis, and 0.40-4.60V output range. Ideal for applications requiring precise detection of magnetic fields in a compact rectangular package for surface mount installations.
OHS3030U
Tt Electronics Plc
OHS3030U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
AD22150Y
Analog Devices
AD22150Y by Analog Devices is a Hall effect magnetic field sensor with -1.2 mT to 1.2 mT range, providing digital voltage output. It comes in a rectangular package for through-hole mounting applications, terminated with solder connections. Ideal for precise magnetic field measurements in various industrial and consumer electronics devices.
DRV5053PAQLPG
DRV5053PAQLPG by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.5V to 38V and operating temperature from -40°C to 125°C. It offers a voltage output range of 0-2V, max output current of 2.3A, and features Hall effect technology. Ideal for applications requiring precise magnetic field sensing in various industries.
SS461A
Honeywell Sensing And Control
SS461A by Honeywell is a magnetic field sensor with 3mT hysteresis, 30V max supply voltage, and 1.57" body width. It's used for detecting magnetic fields in applications requiring a -55 to 160°C operating temperature range, such as automotive sensors or industrial controls. The sensor outputs an analog voltage signal through a latched bipolar input mode with through-hole mounting feature.
APS11060LLHALT-0PL
Magnetic Field Sensors; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
A1325LLHLT-T
Allegro MicroSystems' A1325LLHLT-T is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 150°C operating temperature, and 9mA max current. Ideal for applications requiring Hall effect sensors like automotive systems, industrial controls, and consumer electronics due to its compact rectangular design and analog voltage output.
DRV5053PAQDBZR
DRV5053PAQDBZR by Texas Instruments is a magnetic field sensor with voltage output. It operates b/w -40 to 125°C, with supply voltage range of 2.5-38V and max output current of 2.3A. Ideal for applications requiring precise Hall effect sensing in compact designs.
DRV5055A1QLPGM
DRV5055A1QLPGM by Texas Instruments is a magnetic field sensor with a supply voltage range of 3V to 3.63V and operating temperatures from -40°C to 125°C. It features an output range of -1-1mA, making it suitable for applications requiring precise analog current measurements in various industries such as automotive, industrial automation, and consumer electronics. With a compact rectangular design measuring 4mm x 5.05mm x 1.52 inches, this sensor offers high sensitivity and accuracy for detecting magnetic fields in challenging environments.
DRV5023BIQLPGQ1
Texas Instruments' DRV5023BIQLPGQ1 is a magnetic field sensor with hysteresis of 8.5 mT, operating temperature range from -40 to 125 °C, and output current up to 30 A. Ideal for automotive applications due to AEC-Q100 screening level and unipolar input mode.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Body Height: .95 mm;
A1102EUA-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
A1101LLHLT-T
Allegro MicroSystems' A1101LLHLT-T is a Hall effect magnetic field sensor with 3.8V to 24V supply voltage range, -40°C to 150°C operating temperature, and 5.5mT hysteresis. Ideal for automotive applications due to AEC-Q100 screening level and BICMOS technology for precise voltage output in a compact rectangular package.
A1102ELHLT-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Hysteresis: 5.5 mT;
A1104EUA-T
A1101EUA-T
A1101EUA-T by Allegro MicroSystems is a magnetic field sensor with 24V max supply voltage, -40 to 85°C operating temp range, and 5.5mT hysteresis. Ideal for automotive applications due to AEC-Q100 screening level, BICMOS technology, and 17.5mT max magnetic field range.
A1102LLHLT-T
A1102LLHLT-T by Allegro MicroSystems is a magnetic field sensor with hysteresis of 5.5 mT, operating temperature range from -40 to 150 °C, and voltage output. It is ideal for automotive applications due to its AEC-Q100 screening level, BICMOS technology, and surface mounting feature.
A1101LUA-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Terminal Finish: MATTE TIN;
A1103LUA-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Body Width: 1.52 inch;
A1106LLHLT-T
Allegro MicroSystems' A1106LLHLT-T is a Hall effect magnetic field sensor with 3 terminals, voltage output, and hysteresis of 10.5 mT. It operates b/w -40 to 150°C, suitable for automotive applications requiring precise magnetic field detection in the range of 16-43 mT.
A1104LLHLT-T
Allegro MicroSystems' A1104LLHLT-T is a Hall effect magnetic field sensor with 24V max supply voltage, -40 to 150°C operating temp range, and 5.5mT hysteresis. Ideal for automotive applications due to AEC-Q100 screening level and BICMOS technology.
A1106LUA-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Hysteresis: 10.5 mT;
A1106EUA-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Screening Level: AEC-Q100;
A1102LUA-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Hysteresis: 5.5 mT;
A1103ELHLT-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER;
A1102LLHLX-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Screening Level: AEC-Q100;
A1103LLHLT-T
A1103LLHLX-T
A1101LLHLX-T
Allegro MicroSystems' A1101LLHLX-T is a Hall effect magnetic field sensor with 3 terminals, voltage output, and 5.5 mT hysteresis. It operates b/w -40 to 150°C, with a supply voltage range of 3.8V to 24V. Ideal for automotive applications due to AEC-Q100 screening and BICMOS technology.
A1104LLHLX-T
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved