Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED ATTENUATOR; Minimum Operating Frequency: 0 MHz; Minimum Operating Temperature: -55 Cel; Maximum Operating Frequency: 18000 MHz; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=1000W; JESD-609 Code: e4;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
RF/Microwave Attenuators 47-10-43-LIM attributes and parameters. Explore more RF/Microwave Attenuators devices from Aeroflex/weinschel
Additional Features:
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
Maximum Voltage Standing Wave Ratio:
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
Itt Semiconductor
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
KSZ9031RNXIA
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
151-70
Api Technologies
VARIABLE ATTENUATOR; Minimum Operating Frequency: 0 MHz; Maximum Operating Temperature: 75 Cel; Nominal Attenuation: 70 dB; Maximum Operating Frequency: 4000 MHz; Maximum Voltage Standing Wave Ratio: 1.35;
HMC346ALP3E
Analog Devices
Analog Devices' HMC346ALP3E is a RF attenuator with 30 dB attenuation, 18 dBm input power, and 1.92 VSWR. Ideal for variable attenuation in RF/microwave applications up to 14 GHz, it features GaAs technology and operates b/w -40°C to 85°C.
Cobham Plc
The Cobham Plc 151-70 is a COAXIAL VARIABLE ATTENUATOR with 70 dB Nominal Attenuation, 30 dBm Max Input Power (CW), and 1.35 Max VSWR. Ideal for RF/Microwave applications with a frequency range of 0-4000 MHz, it offers precise signal control in various systems. Operating temperatures range from -20°C to 75°C.
HMC-C053
Analog Devices' HMC-C053 is a COAXIAL RF attenuator with 33 dB nominal attenuation and 17.99 dBm CW input power. It operates from -55°C to 85°C, ideal for variable attenuation in RF/Microwave applications up to 2 GHz frequency range.
82-40-13
FIXED ATTENUATOR; Maximum Operating Temperature: 125 Cel; Additional Features: 7/16-F; N-F, I/P POWER-MAX(PEAK)=10000W; JESD-609 Code: e4; Characteristic Impedance: 50 ohm; Nominal Attenuation: 40 dB;
SKY12343-364LF
Skyworks Solutions
SKY12343-364LF by Skyworks Solutions is a RF/Microwave Attenuator with 25.05 dBm CW input power, 31.75 dB attenuation, and 3 dB insertion loss. It's a variable attenuator with 50 ohm impedance suitable for applications in the frequency range of 100 MHz to 4000 MHz.
BW-30N100W+
Mini-circuits
The Mini-circuits BW-30N100W+ is a 30 dB fixed attenuator with max input power of 50 dBm and VSWR of 1.45. Ideal for RF/Microwave applications, it operates from -55°C to 100°C, covering frequencies from DC to 6 GHz in a coaxial construction.
YAT-3A+
YAT-3A+ by Mini-circuits is a RF attenuator with 2.9 dB attenuation, 1.9 VSWR, and 33.01 dBm CW power handling. Ideal for fixed attenuation in RF/microwave applications up to 18 GHz with GAAS technology and surface mounting feature.
EXB24AT1AR3X
Panasonic
Panasonic's EXB24AT1AR3X is a 1dB fixed attenuator with max input power of 16.02 dBm and VSWR of 1.3, ideal for RF/Microwave applications. Operating from -55°C to 125°C, it has a frequency range of 0-3000 MHz and impedance of 50 ohms, making it suitable for various communication systems.
HMC1019ALP4E
HMC1019ALP4E by Analog Devices is a RF/Microwave Attenuator with 15.5 dB Nominal Attenuation, 27 dBm Max Input Power (CW), and 6.5 dB Max Insertion Loss. It operates from -40 to 85 °C, has a characteristic impedance of 50 ohm, and is ideal for variable attenuation in RF/microwave applications up to 30 GHz.
47-40-34
FIXED ATTENUATOR; Maximum Operating Frequency: 18000 MHz; Maximum Operating Temperature: 125 Cel; Construction: COAXIAL; JESD-609 Code: e4; Characteristic Impedance: 50 ohm;
1-30
Aeroflex/weinschel
FIXED ATTENUATOR; Maximum Voltage Standing Wave Ratio: 1.25; Maximum Operating Temperature: 125 Cel; Nominal Attenuation: 30 dB; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=1000W; Characteristic Impedance: 50 ohm;
R411.820.124
Radiall S A
Radiall S A's R411.820.124 is a 20 dB fixed attenuator with max input power of 30 dBm and VSWR of 1.3, ideal for RF applications up to 6 GHz. Constructed coaxially, it operates b/w -40°C to 85°C, offering a characteristic impedance of 50 ohms for precise signal attenuation in various setups.
R410103121
Radiall S A's R410103121 is a COAXIAL FIXED ATTENUATOR with 3 dB Nominal Attenuation, 33.01 dBm Max Input Power (CW), and 1.3 Max VSWR. It operates from -55°C to 125°C, covering frequencies from 0 MHz to 8000 MHz, ideal for RF/Microwave applications.
R411803121
Radiall S A's R411803121 is a 3 dB fixed attenuator with max input power of 33.01 dBm and VSWR of 1.35. Ideal for RF/Microwave applications, it operates from -55 to 125°C with gold (Au) finish and nickel (Ni) barrier, covering frequencies from 0-18000 MHz.
54-6
FIXED ATTENUATOR; JESD-609 Code: e4; Maximum Input Power (CW): 33.01 dBm; Minimum Operating Temperature: -55 Cel; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 0 MHz;
47-10-21
FIXED ATTENUATOR; Construction: COAXIAL; Maximum Operating Temperature: 125 Cel; Minimum Operating Frequency: 0 MHz; Maximum Input Power (CW): 46.99 dBm; Minimum Operating Temperature: -55 Cel;
VAT-10A+
The Mini-circuits VAT-10A+ is a 10 dB fixed attenuator with max input power of 32.3 dBm and VSWR of 1.5. Ideal for RF/Microwave applications, it operates from -45°C to 100°C, covering frequencies from 0 to 6000 MHz, featuring a coaxial construction for panel mounting.
82-40-22
82-40-22 by Cobham Plc is a fixed attenuator with 40 dB nominal attenuation, handling up to 60 dBm CW input power. With a VSWR of 1.25, it operates in the RF/Microwave range from 0-3000 MHz. Constructed coaxially with gold terminal finish, it's ideal for applications requiring precise signal attenuation and impedance matching in temperature ranges from -55°C to 125°C.
HMC468LP3E
Analog Devices' HMC468LP3E is a RF/Microwave Attenuator with 30 dBm CW input power, 7 dB nominal attenuation, and 1.8 dB max insertion loss. Ideal for applications requiring variable attenuation in the frequency range of 0-6000 MHz, this component operates b/w -40°C to +85°C with a characteristic impedance of 50 ohms.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved