Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED ATTENUATOR; Terminal Finish: Gold (Au); Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 53.98 dBm; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=10000W; Minimum Operating Temperature: -55 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
RF/Microwave Attenuators 45-20-34 attributes and parameters. Explore more RF/Microwave Attenuators devices from Aeroflex/weinschel
Additional Features:
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
Maximum Voltage Standing Wave Ratio:
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
Alpha & Omega Semiconductor
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
2N7002
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
4209
Smiths Group Plc
FIXED ATTENUATOR; Maximum Operating Frequency: 8000 MHz; JESD-609 Code: e4; Minimum Operating Frequency: 0 MHz; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -55 Cel;
HMC8802
HMC8802 by Analog Devices is a RF/Microwave Attenuator with 33.7 dB Nominal Attenuation, 4.6 dB Max Insertion Loss, and 25 dBm Max Input Power (CW). It is a VARIABLE ATTENUATOR suitable for applications requiring precise signal control in the frequency range of 0-13000 MHz.
R411820121
Radiall S A
R411820121 by Radiall S A is a fixed attenuator with a max input power of 33.01 dBm and a max VSWR of 1.35. It operates in a frequency range of 0-18000 MHz and is commonly used in RF/Microwave applications for signal attenuation purposes.
56-10
Aeroflex/weinschel
FIXED ATTENUATOR; Maximum Voltage Standing Wave Ratio: 1.25; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel; Nominal Attenuation: 10 dB; Additional Features: 3.5 MM, I/P POWER-MAX(PEAK)=500W;
45-3-44
Cobham Plc
45-3-44 by Cobham Plc is a fixed attenuator with 3 dB nominal attenuation, handling up to 56.99 dBm CW power and supporting VSWR of 1.1. Ideal for RF applications, it operates b/w -55°C to 125°C, covering frequencies from 0 MHz to 1500 MHz with a characteristic impedance of 50 ohms.
PAT0510SC0DBT10
Tundra Semiconductor
FIXED ATTENUATOR; Minimum Operating Temperature: -55 Cel; Nominal Attenuation: 0 dB; Maximum Voltage Standing Wave Ratio: 1.3; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 0 MHz;
86-10-67
86-10-67 by Cobham Plc is a COAXIAL FIXED ATTENUATOR with 10 dB Nominal Attenuation, handling up to 46.99 dBm CW power. It operates from -55°C to 90°C, has a VSWR of 1.3, and covers frequencies from 0 MHz to 22 GHz, making it ideal for RF/Microwave applications.
2-4
Api Technologies
FIXED ATTENUATOR; Construction: COAXIAL; Maximum Operating Frequency: 18000 MHz; Minimum Operating Frequency: 0 MHz; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel;
40-40-33
Cobham Plc's 40-40-33 is a RF/Microwave Attenuator with max input power of 51.76 dBm, VSWR of 1.2, and nominal attenuation of 40 dB. Ideal for applications requiring fixed attenuators in coaxial construction, it operates b/w -55 to 125°C with characteristic impedance of 50 ohm across frequencies from 0 to 1500 MHz.
87-5
FIXED ATTENUATOR; Maximum Operating Temperature: 100 Cel; Terminal Finish: Gold (Au); Minimum Operating Temperature: -55 Cel; Maximum Input Power (CW): 33.01 dBm; Additional Features: 2.92 MM-F; 2.92 MM-M, I/P POWER-MAX(PEAK)=500W;
57-3-13
Cobham Plc's 57-3-13 is a RF/Microwave Attenuator with 3dB attenuation, 51.76 dBm CW power handling, and VSWR of 1.2. Ideal for fixed attenuator applications in the frequency range of 0-6000 MHz, featuring coaxial construction and gold terminal finish for durability in temperatures from -55 to 125°C.
ADRF5720
Analog Devices' ADRF5720 is a CMOS RF attenuator with 31.5 dB attenuation and 28 dBm CW input power. Operating from 0.009 MHz to 40 GHz, it's ideal for RF/Microwave applications requiring precise signal control in a compact surface-mount package.
284-6-21
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Package Body Material: METAL; Construction: COAXIAL; Maximum Voltage Standing Wave Ratio: 1.3; Additional Features: SMK 2.92 MM-F; SMK 2.92 MM-M, I/P POWER-MAX(PEAK)=5000W;
82-40-14
FIXED ATTENUATOR; Construction: COAXIAL; Additional Features: 7/16-F; N-M, I/P POWER-MAX(PEAK)=10000W; Maximum Voltage Standing Wave Ratio: 1.25; Minimum Operating Frequency: 0 MHz; Maximum Operating Temperature: 125 Cel;
32-4
32-4 by Cobham Plc is a COAXIAL FIXED ATTENUATOR with 4 dB Nominal Attenuation, handling up to 33.01 dBm CW power. It operates from -55°C to 125°C, supports frequencies from 0-18000 MHz, and has a VSWR of 1.35, making it ideal for RF/Microwave applications requiring precise signal attenuation.
HMC306MS10E
Analog Devices' HMC306MS10E is a RF attenuator with 15.5 dB attenuation, 2.7 dB insertion loss, and 28.06 dBm max input power. Ideal for variable attenuation in RF/microwave applications from 700 MHz to 3800 MHz, featuring GAAS technology and surface mounting feature.
741
Lockheed Martin Microwave
Lockheed Martin Microwave's 741 is a variable attenuator module with max input power of 33.01 dBm and VSWR of 1.5. Operating from 0-18000 MHz, it suits RF applications needing precise signal attenuation in a 50 ohm system.
YAT-30A+
Mini-circuits
YAT-30A+ by Mini-circuits is a RF fixed attenuator with 29.97 dB nominal attenuation, 2.1 VSWR, and 30 dBm CW input power. Ideal for applications requiring precise signal control in the frequency range of 0-18000 MHz.
RFSA2013TR7
Qorvo
The Qorvo RFSA2013TR7 is a CMOS variable attenuator with 30 dB nominal attenuation and 3.5 dB max insertion loss. It operates from 50 MHz to 6 GHz, suitable for RF/microwave applications requiring precise signal control in a compact surface-mount package. With a max input power of 30 dBm, it offers high performance across temperatures ranging from -40°C to 105°C.
ADRF5740BCCZN-R7
Analog Devices' ADRF5740BCCZN-R7 is a RF/Microwave Attenuator with 22 dB Nominal Attenuation, 1.49 Max VSWR, and -40 to 105 °C Operating Temperature range. It is a VARIABLE ATTENUATOR suitable for applications requiring precise signal attenuation in the frequency range of 10 MHz to 60 GHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved