Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AFS20A20-1910.00-T3 by Abracon is a SAW filter with 4 terminals, operating at -30 to 85°C. It offers a center frequency of 1910 MHz, max insertion loss of 1.8 dB, and impedance of 50 ohms. Ideal for applications requiring surface mount filters in the 50 ohm system design.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
VNN
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Nova Conductors
Aztec Data Supply Inc.
$0.893
Ampacity Inc.
$1.400
Corohmni
$1.942
AZTECH Wire
$5.784
Continental Prestige Electronics
Argo Parts USA
Perfect Parts
Aranea Global
Having 4 terminals allows for efficient connectivity and signal transmission within the device.
SAW filters are known for their high performance in filtering out unwanted frequencies, ensuring clean and clear signal output.
With a high maximum operating temperature, this SAW filter can withstand heat and function reliably in various environments.
The wide operating temperature range allows this filter to be used in both cold and hot conditions without any performance issues.
The compact width of 1.6mm makes this SAW filter suitable for compact electronic devices where space is limited.
The low maximum insertion loss of 1.8 dB ensures minimal signal loss during filtering, resulting in high-quality output.
The specific center/cutoff frequency of 1910 MHz makes this SAW filter ideal for applications requiring precise frequency filtering.
The 50 OHM input impedance allows for easy integration with other components and systems operating at the same impedance level.
The small length of 2mm contributes to the overall compact size of this SAW filter, making it suitable for portable electronic devices.
Matching the output impedance of 50 OHM with input impedance ensures efficient signal transfer without any impedance mismatches.
The surface mounting type makes it easy to install and secure this SAW filter on circuit boards, saving space and simplifying assembly.
The precise dimensions of 2.0mm length, 1.6mm width, and 0.9mm height provide a compact and standardized form factor for easy integration into various electronic devices.
The low height of 0.9mm contributes to the slim profile of this SAW filter, making it suitable for applications where space constraints are a priority.
SAW Filters AFS20A20-1910.00-T3 attributes and parameters. Explore more SAW Filters devices from Abracon
Additional Features:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
Maximum Insertion Loss:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Dimensions:
Width (mm):
Abracon is a trusted supplier of leading-edge and innovative electronic components including Frequency Control, Timing, Power, Magnetics, RF and Antenna solutions. Servicing world-class companies across the data communication, transportation, industrial, medical, consumer, aerospace, and defense industries, Abracon accelerates customers’ time-to-market by providing unmatched product solutions, technical expertise, and service excellence.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
Taiwan Semiconductor
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Microsemi
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SF1843BA02675S
Renesas Electronics
SAW FILTER; Package Material: PLASTIC; Maximum Operating Temperature: 85 Cel; Mounting Type: SURFACE MOUNT; No. of Functions: 1; Dimensions: L3.0XB3.0XH1.4 (mm)/L0.118XB0.118XH0.055 (inch);
SAFFB2G15AA0F0AR1X
Murata Manufacturing
SAW FILTER; No. of Functions: 1; Height: .5 mm; Width (mm): 0.9; Dimensions: L1.1XB0.9XH0.5 (mm)/L0.043XB0.035XH0.02 (inch); Additional Features: TR, EMBOSSED, 7 INCH;
AFS20A20-1910.00-T3
Abracon
SF1960BA02525SLF
SAW FILTER; Center/Cutoff Frequency (fo/fc): 1960 MHz; Maximum Insertion Loss: 4 dB; Terminal Finish: Matte Tin (Sn); Output Impedance (ohm): 50 OHM; No. of Functions: 1;
ACPF-7003-TR1G
Broadcom
SAW FILTER; Mounting Type: SURFACE MOUNT; No. of Terminals: 4; Maximum Operating Temperature: 85 Cel; Packing Method: TR; Package Material: PLASTIC;
B39162B3520U410
TDK
The TDK B39162B3520U410 SAW Filter has 6 terminals, operates b/w -40°C to 85°C, with a width of 3.0mm. It offers a max insertion loss of 1.8 dB at 1575.42 MHz and impedance of 50 OHM. Ideal for surface mount applications in various electronic devices requiring precise frequency filtering.
SF0060CN02290T
SAW FILTER; Maximum Insertion Loss: 34 dB; Length: 35.1 mm; Minimum Operating Temperature: -25 Cel; JESD-609 Code: e3; Maximum Operating Temperature: 85 Cel;
885062
Qorvo
Qorvo's 885062 SAW Filter has 5 terminals, operates b/w -40 to 95°C. With a width of 1.2mm and length of 1.4mm, it offers a max insertion loss of 2.2 dB at a center frequency of 2412 MHz. Ideal for surface mount applications in ceramic packages, suitable for various electronic devices requiring signal filtering.
SAFFB2G45MA0F0A
SAW FILTER; Height: .5 mm; No. of Functions: 1; Length: 1.1 mm; Dimensions: L1.1XB0.9XH0.5 (mm)/L0.043XB0.035XH0.02 (inch); Width (mm): 0.9;
B39162B3519U410
Rf360 Europe
SAW FILTER; Width (mm): 3.0; Maximum Insertion Loss: 2.4 dB; Length: 3 mm; Impedance (Input): 50 OHM; Dimensions: L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch);
B39921B3588U410
SAW FILTER; JESD-609 Code: e4; Impedance (Input): 50 OHM; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Height: 1.1 mm;
SF0653BA03162S
SAW FILTER; Maximum Insertion Loss: 4.5 dB; Impedance (Input): 50 OHM; Minimum Operating Temperature: -20 Cel; Length: 3.8 mm; Height: 1.5 mm;
SF1843BA02598S
SAW FILTER; No. of Functions: 1; Package Material: PLASTIC; Impedance (Input): 50 OHM; Output Impedance (ohm): 50 OHM; Height: 1.4 mm;
SF0326BA03198S
SAW FILTER; Output Impedance (ohm): 50 OHM; Terminal Finish: Matte Tin (Sn); Impedance (Input): 50 OHM; JESD-609 Code: e3; No. of Terminals: 10;
HWCA602
SAW FILTER; Width (mm): 3.5; Impedance (Input): 50 OHM//50 nH; Height: 1 mm; Output Impedance (ohm): 50 OHM//50 nH; Length: 3.5 mm;
SF0948BA02589S
SAW FILTER; JESD-609 Code: e3; Attenuation At Maximum Frequency: 35 dB; Dimensions: L3.0XB3.0XH1.5 (mm)/L0.118XB0.118XH0.059 (inch); No. of Functions: 1; Height: 1.5 mm;
SF0380BA02443S
SAW FILTER; Mounting Type: SURFACE MOUNT; Height: 2 mm; Dimensions: L7.0XB5.0XH2.0 (mm)/L0.276XB0.197XH0.079 (inch); Maximum Operating Temperature: 85 Cel; Output Impedance (ohm): 50 OHM;
B39162B4310P810
The TDK B39162B4310P810 SAW Filter has a center frequency of 1588.655 MHz and max insertion loss of 1.9 dB. With AEC-Q200 screening, it's ideal for automotive applications requiring a compact design with surface mounting type and gold terminal finish.
SF0043BA02523T
SAW FILTER; Dimensions: L13.7XB2.15XH4.8 (mm)/L0.539XB0.085XH0.189 (inch); Impedance (Input): 1100 OHM//16.4 pF; No. of Functions: 1; Mounting Type: THROUGH HOLE MOUNT; Minimum Operating Temperature: -20 Cel;
TFS170E
SAW FILTER; Minimum Operating Temperature: 10 Cel; Additional Features: TR, EMBOSSED, 13 INCH; Dimensions: L15.32XB6.5XH1.8 (mm)/L0.603XB0.256XH0.071 (inch); Height: 1.8 mm; Impedance (Input): 660 OHM//-11.6 pF;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AFS20A26-915.00-T3
SAW FILTER; Maximum Operating Temperature: 85 Cel; No. of Terminals: 4; No. of Functions: 1; Impedance (Input): 50 OHM; Minimum Operating Temperature: -30 Cel;
AFS20A20-1227.60-T3
SAW FILTER; Length: 2 mm; Height: .9 mm; Output Impedance (ohm): 50 OHM; Minimum Operating Temperature: -30 Cel; Impedance (Input): 50 OHM;
AFS20A42-1575.42-T3
SAW FILTER; No. of Terminals: 4; Dimensions: L2.0XB1.6XH0.75 (mm)/L0.079XB0.063XH0.03 (inch); Mounting Type: SURFACE MOUNT; Height: 1 mm; Minimum Operating Temperature: -40 Cel;
AFS2442.0S4
SAW FILTER; Height: 1.4 mm; Minimum Operating Temperature: -20 Cel; Dimensions: L3.0XB3.0XH1.4 (mm)/L0.118XB0.118XH0.055 (inch); Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 70 Cel;
AFS20A20-1910.00-T2
SAW FILTER; Additional Features: TAPE AND REEL; No. of Terminals: 4; Dimensions: L2.0XB1.6XH0.9 (mm)/L0.079XB0.063XH0.035 (inch); Center/Cutoff Frequency (fo/fc): 1910 MHz; Maximum Insertion Loss: 1.8 dB;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved