Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ABM8G-13.560MHZ-18-D-2-Y-T by Abracon is a 13.56 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85 °C, such as IoT devices and communication systems.
Median Price
$0.609
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Farnell
1+ parts
$0.771
100+ parts
$0.498
1k+ parts
$0.433
10k+ parts
$0.417
DigiKey
$0.950
$0.718
$0.650
-
Mouser Electronics
$0.623
$0.542
Newark
$1.040
$0.810
$0.729
$0.699
Element14
$1.430
$0.955
Master Electronics
$0.501
$0.443
Chip1Stop
$0.556
$0.311
Verical
$0.490
$0.288
Arrow
$0.153
$0.117
Future Electronics
$0.128
$0.125
TTI
$0.182
Rochester
$0.662
$0.549
Dove
$0.520
$0.340
$0.280
Nova Conductors
IBS Electronics
$0.166
$0.163
TME
$0.589
$0.347
Vyrian
NAC Semi
$0.252
Electro Sonic
$0.580
$0.320
VNN
Univa Technologies Pte. Ltd
EMSNET
Semi Source
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Ampacity Inc.
$0.122
Corohmni
$0.353
Aranea Global
$0.539
$0.517
Continental Prestige Electronics
Argo Parts USA
$0.533
Aztec Data Supply Inc.
$1.109
Perfect Parts
Eastek
$0.244
Abacus Technologies
GreenTree Electronics
Univa Technologies Pte. Ltd (Excess)
Having a low frequency tolerance of 20 ppm ensures accurate and stable frequency output, making this crystal oscillator a reliable choice for precision applications.
With a frequency stability of 30%, this crystal oscillator can maintain its frequency output even under varying environmental conditions, ensuring consistent performance.
The low series resistance of 80 ohm allows for efficient power transfer and helps minimize signal loss, making this crystal oscillator suitable for high-frequency applications.
The wide minimum operating temperature range of -40°C ensures reliable operation in harsh environments, making this crystal oscillator suitable for industrial and automotive use.
The gold over nickel terminal finish provides excellent conductivity and corrosion resistance, ensuring long-term reliability and performance of the crystal oscillator.
The parallel fundamental crystal resonator type offers high stability and low phase noise, making this crystal oscillator ideal for applications requiring precise frequency control.
The nominal operating frequency of 13.56 MHz makes this crystal oscillator suitable for various applications such as communication systems, timing circuits, and microcontrollers.
With low aging rate of 3 ppm in the first year, this crystal oscillator maintains its frequency accuracy over time, ensuring consistent performance and reliability.
The load capacitance of 18 pF ensures optimal tuning of the crystal oscillator, enabling precise control of the frequency output for different applications.
The surface mounting feature allows for easy and secure installation of the crystal oscillator on PCBs, saving space and simplifying assembly process.
The low drive level of 10 uW minimizes power consumption while maintaining stable frequency output, making this crystal oscillator energy efficient for battery-operated devices.
The compact physical dimensions make this crystal oscillator suitable for space-constrained applications, allowing for easy integration into various electronic devices.
With a maximum operating temperature of 85°C, this crystal oscillator can withstand high temperature environments, ensuring reliable performance in extreme conditions.
Crystal Oscillators ABM8G-13.560MHZ-18-D-2-Y-T attributes and parameters. Explore more Crystal Oscillators devices from Abracon
Additional Features:
Aging:
Crystal or Resonator Type:
Drive Level:
Frequency Stability:
Frequency Tolerance:
JESD-609 Code:
Load Capacitance:
Manufacturer Series:
Mounting Feature:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Physical Dimension:
Series Resistance:
Terminal Finish:
ABM8G-13.560MHZ-18-D-2-Y-T Crystals & Resonators trade compliance attributes, and parameters.
HTS
8541.60.00.50
SB
8541.60.00.25
Abracon is a trusted supplier of leading-edge and innovative electronic components including Frequency Control, Timing, Power, Magnetics, RF and Antenna solutions. Servicing world-class companies across the data communication, transportation, industrial, medical, consumer, aerospace, and defense industries, Abracon accelerates customers’ time-to-market by providing unmatched product solutions, technical expertise, and service excellence.
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
1N4148WS
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
Db Lectro
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Crimson Semiconductor
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
Transys Electronics
Hy Electronic
ABM81-14.31818MHZ-B4Y-T3
ABM81-14.31818MHZ-B4Y-T3 by Abracon is a 14.31818 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. It operates b/w -20 to 70 °C, suitable for applications requiring precise timing in electronic devices. The surface mount design with gold over nickel finish makes it ideal for compact PCB layouts.
ABM11W-16.0000MHZ-8-K1Z-T3
ABM11W-16.0000MHZ-8-K1Z-T3 by Abracon is a 16 MHz crystal oscillator with 10 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -40°C to 125°C and features a compact surface-mount design.
ABM8-30.000MHZ-10-1U-T
ABM8-30.000MHZ-10-1U-T by Abracon is a 30 MHz crystal oscillator with 10 ppm frequency tolerance and 10% stability. Ideal for applications requiring precise timing in temperature range of -10 to 60 °C, featuring surface mounting and nickel/gold terminal finish.
9C-6.000MAAJ-T
Txc
9C-6.000MAAJ-T by Txc is a crystal oscillator with 6 MHz nominal frequency, 30 ppm tolerance, and 30% stability. Ideal for applications requiring precise timing such as telecommunications equipment or industrial automation systems due to its surface mount feature and low aging rate of 5 PPM/year.
AB-20.000MHZ-B2
AB-20.000MHZ-B2 by Abracon is a 20 MHz crystal oscillator with 50 ppm frequency tolerance and 100% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Measures 11.5mm x 5mm x 13.46mm and operates b/w -20°C to 70°C temperature range.
RH100-12.000-10-2020-EXT-TR
Raltron Electronics
Raltron Electronics' RH100-12.000-10-2020-EXT-TR crystal oscillator offers 20 ppm frequency tolerance, 20% stability, and 100 ohm series resistance. Ideal for applications requiring a 12 MHz operating frequency, such as telecommunications equipment and industrial automation systems.
ABM10-25.000MHZ-E20-T
ABM10-25.000MHZ-E20-T by Abracon is a crystal oscillator with 25MHz frequency, 20ppm tolerance, and 20% stability. Ideal for applications requiring precise timing in electronics, telecommunications, and industrial automation due to its compact size and surface mount feature.
ABM3-8.000MHZ-D2Y-T
ABM3-8.000MHZ-D2Y-T by Abracon is a crystal oscillator with 20 ppm frequency tolerance and 30% frequency stability. It is used in applications requiring an 8 MHz nominal operating frequency, such as communication systems and microcontrollers.
MC-30632.768K-E3:ROHS
Seiko Epson
MC-30632.768K-E3:ROHS by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations at temperatures ranging from -40 to 85 °C.
ABLS7M2-12.000MHZ-D2Y-T
ABLS7M2-12.000MHZ-D2Y-T by Abracon is a 12 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85 °C, such as telecommunications equipment and industrial automation systems.
ABS05W-32.768KHZ-K-2-T
Abracon's ABS05W-32.768KHZ-K-2-T crystal oscillator offers 20 ppm frequency tolerance, 400% stability, and 65000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency with -40 to 125 °C operating range.
ABM8G-13.560MHZ-18-D-2-Y-T
ABM8-32.000MHZ-12-B1U-T
ABM8-32.000MHZ-12-B1U-T by Abracon is a 32 MHz crystal oscillator with 10 ppm frequency tolerance and 10% stability. Ideal for applications requiring precise timing in electronics, telecommunications, and industrial automation due to its compact size and surface mount feature.
FC-13532.7680KA-AG5
Epson Toyocom
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/FIRST YEAR; Series Resistance: 70000 ohm; Drive Level: .5 uW;
Q13FC1350000300
Seiko Epson's Q13FC1350000300 crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 55000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz, such as in telecommunications equipment or industrial automation systems.
403C11A12M00000
Cts
Cts 403C11A12M00000 crystal oscillator offers 10 ppm frequency tolerance and 10% stability. With a nominal frequency of 12 MHz, it's ideal for applications requiring precise timing in electronics. This surface-mount device operates b/w -20°C to 70°C, making it versatile for various temperature conditions.
R1612-27.120-8-F-3030-EXT-TR
Raltron Electronics' R1612-27.120-8-F-3030-EXT-TR crystal oscillator offers 30 ppm frequency tolerance and 30% stability, with a series resistance of 150 ohm. Ideal for applications requiring a parallel-fundamental crystal type at 27.12 MHz, it operates b/w -40 to 85 °C and features a compact surface-mount design.
ABS07AIG-32.768KHZ-D-T
Abracon's ABS07AIG-32.768KHZ-D-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 60000 ohm series resistance. Ideal for applications requiring a 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
ABM11-24.000MHZ-D2X-T3
ABM11-24.000MHZ-D2X-T3 by Abracon is a 24 MHz crystal oscillator with 20 ppm frequency tolerance and 20% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C and features nickel gold terminal finish for surface mounting.
NX3225SA-25.000M-STD-CSR-3
Nihon Dempa Kogyo
NX3225SA-25.000M-STD-CSR-3 by Nihon Dempa Kogyo is a 25 MHz crystal oscillator with 15 ppm frequency tolerance and 15% stability. It operates b/w -10 to 75 °C, suitable for applications requiring precise timing in compact devices due to its small size and surface mount feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ABM8-25.000MHZ-B2-T
ABM8-25.000MHZ-B2-T by Abracon is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Operating temperature range from -20 to 70 °C with nickel gold terminal finish.
ABM8-25.000MHZ-D2Y-T
ABM8-25.000MHZ-D2Y-T by Abracon is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85 °C, such as telecommunications equipment and industrial automation systems.
ABM8G-25.000MHZ-18-D-2-Y-T
ABM8G-25.000MHZ-18-D-2-Y-T by Abracon is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85 °C, such as telecommunications equipment and industrial automation systems.
ABM8AIG-12.000MHZ-12-2Z-T3
ABM8AIG-12.000MHZ-12-2Z-T3 by Abracon is a 12 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in temperature ranges from -40 to 125 °C, such as telecommunications equipment and industrial automation systems.
ABM8-16.000MHZ-B2-T
ABM8-16.000MHZ-B2-T by Abracon is a 16 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, such as IoT devices, wearables, and communication systems.
ABM8G-25.000MHZ-18-D-2-Y-T3
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/FIRST YEAR; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e4;
ABM8G-12.000MHZ-18-D-2-Y-T
ABM8G-12.000MHZ-18-D-2-Y-T by Abracon is a 12 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as telecommunications equipment and industrial automation systems. Operating temperature range from -40 to 85 °C with surface mount feature for easy installation.
ABM8G-12.000MHZ-18-D-2-Y-T3
ABM8G-12.000MHZ-18-D-2-Y-T3 by Abracon is a 12 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature-sensitive environments, it features gold terminal finish and operates b/w -40 to 85 °C.
ABM8G-24.000MHZ-18-D-2-Y-T
ABM8G-24.000MHZ-18-D-2-Y-T by Abracon is a 24 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications equipment and industrial automation systems.
ABM8G-25.000MHZ-B-4-Y-T
ABM8G-25.000MHZ-B-4-Y-T by Abracon is a 25 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, such as telecommunications equipment and industrial automation systems.
ABM8G-106-12.000MHZ-T
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/FIRST YEAR; Physical Dimension: 3.2mm x 2.5mm x 1mm; Nominal Operating Frequency: 12 MHz;
ABM8G-16.000MHZ-18-D-2-Y-T
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/FIRST YEAR; Drive Level: 10 uW; Terminal Finish: GOLD OVER NICKEL;
ABM8G-20.000MHZ-18-D-2-Y-T
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/FIRST YEAR; Minimum Operating Temperature: -40 Cel; Terminal Finish: GOLD OVER NICKEL;
ABM8G-25.000MHZ-B-4-Y-T3
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/FIRST YEAR; Load Capacitance: 10 pF; Series Resistance: 60 ohm;
ABM8G-24.000MHZ-18-D-2-Y-T3
ABM8G-24.000MHZ-18-D-2-Y-T3 by Abracon is a crystal oscillator with a frequency tolerance of 20 ppm and stability of 30%. It has a series resistance of 60 ohm and is suitable for applications requiring precise timing, such as in communication systems or microcontrollers.
ABM8G-12.000MHZ-B-4-Y-T
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/FIRST YEAR; Additional Features: TR, 7 INCH; Physical Dimension: L3.2XB2.5XH1.0 (mm)/L0.126XB0.098XH0.039 (inch);
ABM8-24.000MHZ-B2-T
ABM8-24.000MHZ-B2-T by Abracon is a 24 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, such as telecommunications equipment and industrial automation systems.
ABM8G-12.000MHZ-B-4-Y-T3
ABM8G-12.000MHZ-B-4-Y-T3 by Abracon is a 12 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Features gold over nickel terminal finish and operates b/w -20°C to 70°C temperature range.
ABM8-20.000MHZ-B2-T
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 2 PPM/FIRST YEAR; Load Capacitance: 18 pF; Nominal Operating Frequency: 20 MHz;
ABM8G-16.000MHZ-18-D-2-Y-T3
ABM8G-16.000MHZ-18-D-2-Y-T3 by Abracon is a 16 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85 °C, such as telecommunications equipment or industrial automation systems.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved