Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ECS-110.5-20-5G3XDS-TR by Ecs International is a 11.0592 MHz crystal oscillator with 30 ppm frequency tolerance and 100% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 125 °C, features a load capacitance of 20 pF, and has a drive level of 500 uW.
Median Price
$0.890
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.672
1k+ parts
$0.609
10k+ parts
-
Mouser Electronics
$0.583
$0.452
Verical
$0.515
Nova Conductors
$0.507
Vyrian
Ampacity Inc.
$0.438
Aranea Global
$0.497
$0.477
Continental Prestige Electronics
Argo Parts USA
$0.492
Netroflash
$0.482
$0.472
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
The low frequency tolerance ensures accurate and stable frequency output, making it suitable for precision applications.
High frequency stability ensures consistent performance over time, ideal for applications requiring reliable and uninterrupted operation.
The low series resistance helps in efficient signal transmission and reduces energy loss, making the oscillator energy-efficient.
The wide operating temperature range makes this oscillator suitable for use in extreme environmental conditions.
The terminal finish ensures good solderability and corrosion resistance, enhancing the reliability and longevity of the product.
This type offers excellent frequency stability and accuracy, making it suitable for applications requiring precise timing.
The specific nominal operating frequency makes this oscillator suitable for applications requiring this particular frequency.
Low aging rate ensures long-term frequency accuracy and stability, making it a reliable choice for long-duration applications.
The specified load capacitance ensures optimal performance and compatibility with the target circuit, improving overall efficiency.
The surface mount design allows for easy and compact installation on PCBs, saving space and simplifying production processes.
The low drive level requirement indicates energy-efficient operation and compatibility with a wide range of devices.
The compact size of the oscillator enables easy integration into space-constrained applications without compromising performance.
The high maximum operating temperature allows for reliable performance even in harsh environments with elevated temperatures.
Crystal Oscillators ECS-110.5-20-5G3XDS-TR attributes and parameters. Explore more Crystal Oscillators devices from Ecs International
Aging:
Crystal or Resonator Type:
Drive Level:
Frequency Stability:
Frequency Tolerance:
JESD-609 Code:
Load Capacitance:
Mounting Feature:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Physical Dimension:
Series Resistance:
Terminal Finish:
A Global Leader in Designing and Manufacturing Crystal and Quartz Oscillators, Power Inductors and Other Timing Solutions At ECS Inc. our mission is to create relationships to enrich your life through technology. We aspire to lead industry professionals and passionate people to spark technological solutions that create a more advanced world. Founded in 1980, ECS Inc. is headquartered in Lenexa, Kansas, USA. We have been conducting international business for more than 40 years and are a globally recognized developer and manufacturer of innovative frequency control, synchronization, connectivity and magnetic power solutions. ECS Inc. has been recognized by several world class research firms and electronic device designers as one of the top ten global companies in the passive component industry. As of today, ECS Inc. has delivered more than 3.4 billion passive timing and magnetic solutions to customers in more than 150 countries. Beyond the products that drive technology, ECS Inc. has a global engineering and sales support system of more than 18 locations in South Korea, Japan, China, Singapore and the United States. For more than forty years, ECS Inc. has committed to reliable and innovative timing solutions. ECS Inc. has met growing global demand with highly reliable and innovative passive components such as crystal oscillators, SMD crystals, power inductors, real time clocks and other timing solutions. The global supply chain network along with locations in key design and support centers in major markets allows ECS Inc. to remain as one of the primary providers of frequency control solutions.
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABM8-25.000MHZ-D2-T
Abracon
ABM8-25.000MHZ-D2-T by Abracon is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C, features parallel-fundamental type, and has load capacitance of 18 pF.
ABMM-12.000MHZ-B-2-T
ABMM-12.000MHZ-B-2-T by Abracon is a 12 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 70 °C, featuring a parallel-fundamental crystal type and surface mounting feature.
E8WSDC12-32.768K
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Drive Level: .5 uW; Frequency Stability: 144 %;
12.88668
Geyer Electronic
12.88668 crystal oscillator by Geyer Electronic offers a frequency tolerance of 30 ppm and stability of 50%. With a nominal operating frequency of 27 MHz, it is ideal for applications requiring precise timing such as telecommunications equipment or industrial automation systems. The compact surface mount design with nickel/gold terminal finish makes it suitable for space-constrained PCB layouts.
AB26T-32.768KHZ-6
AB26T-32.768KHZ-6 by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 42% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency such as timekeeping devices due to its high precision and low aging rate of 3 PPM/first year.
ECS-.327-12.5-16-TR
Ecs International
ECS-0.327-12.5-16-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 90000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as IoT devices and wearables due to its compact size of 1.6mm x 1.0mm x 0.5mm and surface mount feature.
MA-50612.0000M-C0:ROHS
Seiko Epson
MA-50612.0000M-C0:ROHS by Seiko Epson is a 12 MHz crystal oscillator with 50 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -20°C to 70°C, featuring a surface mount design and low drive level of 10 uW.
FA-23816.0000MB-W
FA-23816.0000MB-W by Seiko Epson is a 16 MHz crystal oscillator with 50 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -20°C to 70°C, features gold terminal finish, and has a compact size of 3.2mm x 2.5mm x 0.7mm for surface mount installation.
ABM8-25.000MHZ-B2-T
ABM8-25.000MHZ-B2-T by Abracon is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Operating temperature range from -20 to 70 °C with nickel gold terminal finish.
ECX-.327-CDX-1293
ECX-0.327-CDX-1293 by Ecs International is a crystal oscillator with 5 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as telecommunications and industrial automation due to its compact surface mount design and gold terminal finish.
MP04A
Cts
The Cts MP04A crystal oscillator operates at 4 MHz with a frequency tolerance of 45 ppm and stability of 50%. It features a series resistance of 150 ohm, suitable for applications requiring precise timing in temperature range from -20 to 70 °C. Ideal for through hole mounting, it has drive level of 100 uW and compact dimensions L10.85XB4.5XH13.46 (mm).
ECS.327-12.5-34R-C-TR
ECS.327-12.5-34R-C-TR by Ecs International is a crystal oscillator with 10 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at frequencies of 0.032768 MHz, such as in telecommunications and industrial automation systems. Operating range from -40°C to 85°C makes it versatile for various environments.
ABM10AIG-12.000MHZ-D2Z-T3
ABM10AIG-12.000MHZ-D2Z-T3 by Abracon is a crystal oscillator with a frequency tolerance of 20 ppm and frequency stability of 50%. It is commonly used in applications requiring a nominal operating frequency of 12 MHz, such as communication systems and microcontrollers.
FA-23825.0000MB-C3
FA-23825.0000MB-C3 by Seiko Epson is a crystal oscillator with 25 MHz nominal frequency, 50 ppm tolerance, and 30% stability. Ideal for applications requiring precise timing in electronics due to its compact size and surface mount feature. Operating temperature range from -20°C to 70°C makes it versatile for various environments.
ABM3-14.31818MHZ-D2Y-T
ABM3-14.31818MHZ-D2Y-T by Abracon is a 14.31818 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as telecommunications equipment and industrial automation systems.
ABM7-25.000MHZ-D-2-Y-T
ABM7-25.000MHZ-D-2-Y-T by Abracon is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems.
ABM8-32.000MHZ-10-D1G-T
ABM8-32.000MHZ-10-D1G-T by Abracon is a 32 MHz crystal oscillator with 10 ppm frequency tolerance and 15% stability. Ideal for applications requiring precise timing in temperature-sensitive environments, it features parallel fundamental type and surface mounting feature.
MA-40612.8000M-B0:ROHS
Seiko Epson's MA-40612.8000M-B0:ROHS crystal oscillator offers 50 ppm frequency tolerance, 300000% stability, and 5 PPM/first year aging. Ideal for applications requiring a 12.8 MHz nominal operating frequency, such as telecommunications and consumer electronics due to its compact size and surface mounting feature.
MS1V-T1K32.768KHZ6PF+/-20PPMTAQC
Micro Crystal Ag
MS1V-T1K32.768KHZ6PF+/-20PPMTAQC by Micro Crystal Ag is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 126% frequency stability. Ideal for applications requiring precise timing, such as IoT devices, wearables, and real-time clocks.
ABS09-32.768KHZ-1-T
Abracon's ABS09-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz, such as in telecommunications equipment or industrial automation systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ECS-120-20-5PX-TR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/FIRST YEAR; Nominal Operating Frequency: 12 MHz; Additional Features: TR;
ECS-120-20-3X-TR
ECS-120-20-3X-TR by Ecs International is a crystal oscillator with a frequency tolerance of 30 ppm and frequency stability of 50%. It is commonly used in applications requiring a nominal operating frequency of 12 MHz, such as communication systems and electronic devices.
ECS-120-20-30B-TR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/FIRST YEAR; Load Capacitance: 20 pF; Nominal Operating Frequency: 12 MHz;
ECS-100-20-7SX-TR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/FIRST YEAR; JESD-609 Code: e3; Drive Level: 100 uW;
ECS-120-20-3X-EN-TR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/FIRST YEAR; Physical Dimension: L7.0XB4.1XH2.3 (mm)/L0.276XB0.161XH0.091 (inch); Minimum Operating Temperature: -40 Cel;
ECS-143-18-23A-EN-TR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/YEAR; Frequency Stability: 50 %; Terminal Finish: Gold (Au);
ECS-110.5-20-5G3X-DS-TR
ECS-110.5-20-5G3X-DS-TR by Ecs International is a crystal oscillator with 30 ppm frequency tolerance, 100% stability, and 50 ohm series resistance. Ideal for applications requiring precise timing at 11 MHz, it operates b/w -40°C to 125°C and features tin-nickel terminal finish for durability in surface mount setups.
ECS-120-10-36Q-ES-TR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/FIRST YEAR; Drive Level: 10 uW; JESD-609 Code: e4;
ECS-120-18-9X
PARALLEL - FUNDAMENTAL; Mounting Feature: THROUGH HOLE MOUNT; Frequency Tolerance: 50 ppm; Aging: 5 PPM/FIRST YEAR; Minimum Operating Temperature: -10 Cel; Drive Level: 50 uW;
ECS-120-20-4XDN
ECS-120-20-4XDN by Ecs International is a 12 MHz crystal oscillator with 30 ppm frequency tolerance and 100% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C and features a parallel-fundamental crystal type. With through-hole mounting and compact dimensions of L10.5XB4.65XH3.5 (mm), it offers reliable performance in various electronic devices.
ECS-160-20-4X
PARALLEL - FUNDAMENTAL; Mounting Feature: THROUGH HOLE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/FIRST YEAR; Physical Dimension: 11.35mm X 4.65mm X 3.5mm; Series Resistance: 40 ohm;
ECS-120-18-5G3X-DS-TR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/YEAR; Physical Dimension: 11.4mm x 4.7mm x 4.2mm; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier;
ECS-120-18-5G3XDS-TR
ECS-120-18-5G3XDS-TR by Ecs International is a crystal oscillator with 30 ppm frequency tolerance, 100% stability, and 50 ohm series resistance. Ideal for applications requiring precise timing such as telecommunications equipment or industrial automation systems. Operating from -40 to 125 °C, it offers reliable performance in various environments.
ECS-120-20-46X
PARALLEL - FUNDAMENTAL; Mounting Feature: THROUGH HOLE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/FIRST YEAR; Maximum Operating Temperature: 70 Cel; Drive Level: 100 uW;
ECS-120-32-5PXDU-TR
ECS-120-32-5PXDU-TR by Ecs International is a crystal oscillator with 12 MHz frequency, 30 ppm tolerance, and 10% stability. Ideal for applications requiring precise timing in electronics due to its compact size and surface mount feature. Operating range from -55°C to 125°C makes it versatile for various environments.
ECS-160-18-4XEN
PARALLEL - FUNDAMENTAL; Mounting Feature: THROUGH HOLE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/FIRST YEAR; Load Capacitance: 18 pF; Nominal Operating Frequency: 16 MHz;
ECS-160-18-4X-EN
ECS-160-18-4X-EN by Ecs International is a crystal oscillator with 16 MHz nominal frequency, 30 ppm tolerance, and 50% stability. Ideal for applications requiring precise timing in temperature ranges from -40 to 85°C. Features through-hole mounting, matte tin finish, and low aging rate of 5 PPM/first year.
ECS-160-20-5PX-TR
ECS-160-20-5PX-TR by Ecs International is a crystal oscillator with 16 MHz nominal frequency, 30 ppm tolerance, and 50% stability. Ideal for applications requiring precise timing in electronics due to its compact size and surface mount feature. Operating temperature ranges from -10°C to 70°C making it versatile for various environments.
ECS-120-20-30B-DU-TR
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/FIRST YEAR; JESD-609 Code: e4; Minimum Operating Temperature: -55 Cel;
ECS-110.5-20-4VX-DS
PARALLEL - FUNDAMENTAL; Mounting Feature: THROUGH HOLE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/FIRST YEAR; Series Resistance: 60 ohm; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved