Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
WIRE AND CABLE;
Median Price
$111.441
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
< 1k
DigiKey
1+ parts
$2.030
100+ parts
$1.061
1k+ parts
-
10k+ parts
Mouser Electronics
$91.650
$83.350
Verical
$131.232
TTI Europe
$138.058
$71.544
Nova Conductors
$70.714
IBS Electronics
$119.227
$91.906
$88.666
Vyrian
VNN
Ampacity Inc.
$1.630
Corohmni
$2.268
Aztec Data Supply Inc.
$7.110
AZTECH Wire
$16.809
Continental Prestige Electronics
$64.150
$62.867
Netroflash
Authorized Procurement Solutions
Argo Parts USA
Perfect Parts
Electrical Wires & Cables 3756/20100 attributes and parameters. Explore more Electrical Wires & Cables devices from 3m Electronic Products Division
Connector Accessory Type:
With over 60,000 products in our portfolio, 3M brands deliver science-based performance and extraordinary outcomes across almost any industry you can imagine.
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Telefunken Microelectronics
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
Secos
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
Meritek Electronics
Space Power Electronics
2-1437356-9
TE Connectivity
TE Connectivity 2-1437356-9 is a UL approved stranded cable with PVC jacket, rated for 300V. Featuring 28 AWG copper alloy conductor, it's ideal for ribbon and flat cable applications. With a max current of 2A and temperature range from -20 to 105°C, it offers versatility in various electrical setups.
5855/7BK001
Alpha Wire
Alpha Wire 5855/7BK001 is a MIL-approved stranded wire with silver finish. Featuring PTFE insulation, it's rated for 600V and operates b/w -60 to 105°C. Ideal for electronic, medical, and military applications due to its flexibility and copper conductor.
430450600
Habia Cable Ab
Habia Cable Ab's 430450600 is a MIL-approved electrical wire with stranded construction, rated for 600V. Featuring copper conductor, HFI140 insulator, and tin finish, it has applications in Seaguard products, defense, Habiatron, and Railguard. With a cross-section area of 6mm2 and max operating temperature of 120°C, it is ideal for various industrial uses.
M16878/6BDE-9
Carlisle Interconnect Technologies
M16878/6BDE-9 by Carlisle Interconnect Technologies is a MIL-approved stranded wire with silver finish, PTFE insulation, and copper conductor. It operates b/w -55 to 200 °C and has a resistance of 0.126 ohm. Ideal for flexible cord and fixture wire applications due to its construction and rated voltage of 250 V.
1555RD005
Alpha Wire's 1555RD005 is a stranded electrical wire with TIN finish, rated for 1000V. Featuring PVC insulation, it operates b/w -40 to 80°C. Ideal for flexible cords and fixtures due to its copper alloy conductor, AWG 18 gauge, and 0.823mm² cross-sectional area.
1898/5CSL005
Alpha Wire 1898/5CSL005 is a 300V stranded cable with PVC jacket, ideal for communication and control applications. Featuring 5 conductors of 18 AWG copper alloy with tin finish, it offers a temperature range of -20 to 80°C. With a resistance of 0.023 ohm and cross-section area of 0.823 mm2, this cable is reliable for various electrical setups.
92390101000
Belden
887689810
Molex
Molex 887689810 cable features UL approval, shielding, and 28 AWG wire gauge. With HDMI male connectors on both sides, it is ideal for high-definition audio/video applications requiring reliable signal transmission over a length of 1.93 mm.
M22759/11-22-5
Defense Logistics Agency
M22759/11-22-5 by Defense Logistics Agency is a MIL-W-22759 approved electrical wire with stranded construction, silver finish, and extruded TFE insulator. Rated for 600V, it has a max temp of 200°C. Ideal for flexible cord and fixture wire applications due to its copper conductor, 22 AWG size, and 0.326 mm2 cross-section area.
3049BK001
3049BK001 by Alpha Wire is a stranded electrical wire with a rated voltage of 300V. It has a conductor made of copper alloy and an insulator made of PVC. This flexible cord and fixture wire is suitable for applications requiring a temperature range of -40 to 105°C.
34440010250
Wires and Cables;
M22759/32-18-9
Allied Wire & Cable
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; No. of Conductors: 1; Construction: STRANDED; Approvals (V): MIL;
282030-013
TE Connectivity's 282030-013 wire is a flexible cord with 22 AWG copper alloy conductor, rated for 600V. With a temperature range of -65 to 150°C, it is ideal for electrical applications requiring durability and flexibility like fixtures and cables.
175101-22-24.00
Amphenol
CABLE ASSEMBLY;
1552400245
629722000214
Wuerth Elektronik & Kg
3365/26SF
3m Electronic Products Division
3m Electronic Products Division's 3365/26SF is a UL-approved FLAT FLEXIBLE CABLE with 26 conductors of STRANDED TINNED COPPER. Featuring POLYVINYL CHLORIDE insulation, it operates b/w -20 to 105 °C, ideal for electrical wiring applications.
CO-174RASMAX2-000.6
RF179-72SP2-72RP2-0400
Samtec
Samtec RF179-72SP2-72RP2-0400 is a communication cable with FLUORINATED ETHYLENE PROPYLENE jacket, SILVER finish, and POLYTETRAFLUOROETHYLENE insulator. It operates b/w -50 to 165 °C, has AWG 28 wire gauge, and supports 3A current. Ideal for MCX PLUG connections in various applications.
5479CSL001
Alpha Wire 5479CSL001 is a 300V stranded cable with PVC jacket, shielding, and tin finish. Suitable for communication/control applications, it has 18 conductors of copper alloy with a cross-section area of 0.205 mm2. Operating temperature ranges from -20 to 80°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3756/40
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; DIN Conformity: NO; IEC Conformity: NO; Construction: FLAT;
3756/40100
3756/100
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Approvals (V): CUL; UL; Minimum Operating Temperature: -40 Cel; Cross Section Area: .05 mm2;
3756/20
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Approvals (V): CUL; UL; Cross Section Area: .05 mm2; Insulator Material: THERMOPLASTIC ELASTOMER;
3756/10
3756/10 by 3m Electronic Products Division is a flat cable with 10 conductors, each made of tin-finished copper. It has approvals from CUL and UL for a rated voltage of 150V. With a max operating temperature of 105°C, it's ideal for electrical wiring applications.
3756/10100
3m Electronic Products Division's 3756/10100 is a UL/CUL approved stranded flat cable with 10 copper alloy conductors, tin finish, and thermoplastic elastomer insulation. It has a rated voltage of 150V, operating temperature range from -40 to 105°C, and wire gauge of AWG 30. Ideal for electrical applications requiring flexibility and durability in confined spaces.
3756/68
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; MIL Conformity: NO; DIN Conformity: NO; Cross Section Area: .05 mm2;
3756/20SF
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; No. of Conductors: 20; Length: 30.48 mm; MIL Conformity: NO;
3756/16SF
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Approvals (V): CUL; UL; No. of Conductors: 16; DIN Conformity: NO;
3756/26SF
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Insulator Material: THERMOPLASTIC ELASTOMER; IEC Conformity: NO; DIN Conformity: NO;
3756/26
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Conductor Material: COPPER; Cross Section Area: .05 mm2; Maximum Operating Temperature: 105 Cel;
3756/30
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Conductor Material: COPPER; Length: 30.48 mm; DIN Conformity: NO;
3756/40SF
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Wire Gauge (AWG): 30; Length: 30.48 mm; No. of Conductors: 40;
3756/50
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Insulator Material: THERMOPLASTIC ELASTOMER; Approvals (V): CUL; UL; Minimum Operating Temperature: -40 Cel;
3756/80SF
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Conductor Material: COPPER; No. of Conductors: 80; Minimum Operating Temperature: -40 Cel;
3756/20300
3756/26100
3756/26300
3756/50100
3756/80100
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved