Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
3365/16 by 3M Electronic Products Division is a UL-approved FLAT FLEXIBLE CABLE with 16 conductors of TINNED COPPER. Featuring STRANDED construction, it has a wire gauge of 28 AWG and can operate b/w -20 to 105 °C. Ideal for electrical applications requiring flexibility and durability in confined spaces.
Median Price
$30.605
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Distrelec
1+ parts
$2.881
100+ parts
-
1k+ parts
10k+ parts
Farnell
$4.720
Adafruit Industries
$6.148
$5.841
Element14
$7.370
RS Americas
$53.840
$45.230
TTI Europe
$54.980
$40.434
$38.684
Newark
$69.620
$50.510
DigiKey
$294.310
$169.584
PSC Electronics
Nova Conductors
$37.790
QIE Inc.
Vyrian
VNN
M&R Communications
Prism Electronics
Carlin Systems, Inc.
Electronic Expediters
Extreme Components
Bristol Electronics
Atlantic Semiconductor
Mil-Aero Solutions, Inc.
R&J Components
PC Components Company LLC
J & M Industries LLC
Corohmni
$1.426
Semicontronic
$2.450
$2.389
$2.376
Ampacity Inc.
Advanced Electronics
Aztec Data Supply Inc.
$7.148
Netroflash
$37.034
Continental Prestige Electronics
$58.680
Authorized Procurement Solutions
Glotronic Ltd.
GreenTree Electronics
Argo Parts USA
Having UL approval ensures that the product meets certain safety standards and can be trusted for use in various applications.
With a high rated voltage of 300V, this cable is suitable for a wide range of electrical applications without the risk of voltage overload.
Tin conductor finish helps in reducing oxidation and ensuring better conductivity, resulting in efficient and long-lasting performance.
Polyvinyl chloride insulator provides good insulation properties and protection against electrical hazards, making the cable safe for use.
With a high maximum operating temperature, this cable can withstand heat effectively and ensure continuous operation without damage.
The low minimum operating temperature makes this cable suitable for use in various environments, even in cold conditions without compromising performance.
A smaller wire gauge such as 28 AWG allows for flexibility and easy installation in tight spaces while ensuring sufficient conductivity.
The specified length provides enough cable for various applications, offering flexibility in installation and ensuring adequate coverage.
The stranding of 7X36 provides flexibility and resistance to breaking, making the cable durable and ideal for applications requiring frequent movement.
Tinned copper conductors offer excellent conductivity, corrosion resistance, and longevity, ensuring stable performance over time.
Having 16 conductors allows this cable to transmit multiple signals or power sources simultaneously, making it versatile for various applications.
Being a flat flexible cable, this product is easy to bend, route, and install in tight spaces, providing convenience and versatility in applications.
Electrical Wires & Cables 3365/16 attributes and parameters. Explore more Electrical Wires & Cables devices from 3m Electronic Products Division
Additional Features:
Approvals (V):
Conductor Finish:
Conductor Material:
Connector Accessory Type:
Construction:
Insulator Material:
Length:
No. of Conductors:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Voltage:
Shielding:
Stranding:
Wire Gauge (AWG):
Wire & Cable Name:
With over 60,000 products in our portfolio, 3M brands deliver science-based performance and extraordinary outcomes across almost any industry you can imagine.
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
General Instrument
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SN65HVD234DR
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
Transys Electronics
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
Infineon Technologies
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
87600601000
Belden
Belden 87600601000 is a flexible cord with 2 conductors, rated at 300V and 7.2A. Constructed with twisted copper conductors, PVC jacket, and shielding for CE, NEC, UL approvals. Ideal for electrical wiring applications requiring flexibility and durability in temperatures ranging from -20 to 60°C.
3600B/26SF
3m Electronic Products Division
3m Electronic Products Division's 3600B/26SF wire is a POWER-LIMITED cable with 26 conductors, shielded and approved by CUL & UL for 150V. Featuring STRANDED construction, TIN finish, and PVC jacket, it is ideal for electrical applications requiring flexibility and durability.
M81044/12-26-9
TE Connectivity's M81044/12-26-9 is a MIL-DTL-81044 compliant wire with 600V rating, TIN finish, and copper alloy conductor. It operates b/w -65 to 150°C, has 26 AWG size, 0.15 mm2 area, and 19X38 stranding. Ideal for flexible cord and fixture wire applications.
7000-40581-6310100
Murrelektronik
CABLE ASSEMBLY;
135103-02-03.00
Amphenol
M17/113-RG316
Harbour Industries
WIRE AND CABLE; Rated Voltage: 1200 V; Shielding: YES; MIL Conformity: YES; Diameter: 2.489 mm; Approvals (V): MIL;
45135
Helukabel
Helukabel 45135 is a CE-approved stranded flat cable with PVC jacket and tin finish. With 24 conductors, it's ideal for quick IDC connections at 300V. Operating from -20 to 80°C, this cable has a cross-section area of 0.09mm2 and resistance of 0.23 ohm, making it suitable for various electrical applications.
13253
Helukabel 13253 is a stranded wire with polymer jacket, rated at 600V. With approvals from BS, CUL, DIN, IEC, UL, VDE, it's ideal for fixed installations. Featuring 5 bare copper conductors and a cross-section area of 1mm2, this flexible cord has an operating temperature range of -40 to 80°C.
15022
Helukabel 15022 is a CE, EAC, IPA, VDE approved control cable with PVC jacket and insulation. Featuring stranded construction, it has 5 bare copper conductors with 0.75 mm2 cross-section area. Ideal for flexible use in medium mechanical stresses at temperatures ranging from -40 to 80 °C.
982670277
Molex
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 12;
3081RD001
Alpha Wire
Alpha Wire 3081RD001 is a flexible cord with 10 AWG copper alloy conductor, rated at 600V. Featuring PVC insulation, it operates b/w -40 to 105°C and has approvals from CE, CSA, and UL. Ideal for electrical applications requiring durable stranded wires with a cross-section area of 5.261 mm2.
2118651-6
TE Connectivity's 2118651-6 is a communication cable with FLUORINATED ETHYLENE PROPYLENE jacket, suitable for temperatures ranging from -45 to 85 °C. Featuring UMCC connectors on both sides, this cable has a wire gauge of 32 AWG and a diameter of 1.13 mm, making it ideal for various electrical applications.
M22759/32-22-9
Defense Logistics Agency
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Resistance: .053 ohm; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Wire Gauge (AWG): 22;
M22759/11-22-0
Allied Wire & Cable
WIRE AND CABLE; Shielding: NO; Stranding: 19X34; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Approvals (V): MIL; SAE; Additional Features: STANDARD: MIL-W-22759/11;
2273122-4
TE Connectivity 2273122-4 is a 22 AWG communication cable with rated voltage of 125V, suitable for temperatures ranging from -30 to 80°C. It has a max current rating of 4A and diameter of 5mm, making it ideal for various electrical wiring applications.
830030101000
Belden 830030101000 is a UL-approved flexible cord and fixture wire with stranded silver-coated copper conductor (24 AWG, 1.1176 mm diameter, 19X36 stranding) insulated with TFE material. Ideal for electrical wiring applications requiring flexibility and durability.
44A0111-24-0
TE Connectivity's 44A0111-24-0 cable is a stranded wire with tin finish, rated at 600V. With a conductor material of copper alloy and max operating temperature of 150°C, it is ideal for general purpose and lightweight applications. Featuring a wire gauge of 24 AWG and diameter of 1.02mm, this flexible cord and fixture wire is suitable for various electrical needs.
5853/19BK005
Alpha Wire 5853/19BK005 is a stranded electrical wire with silver finish, TFE insulator, and copper conductor. Rated for 600V, it's MIL-approved and suitable for electronic, medical, and military applications. Operating from -60°C to 200°C, it's a flexible cord & fixture wire in 26 AWG with 19X38 stranding.
UT232R-500
UT232R-500 by FTDI is a 5mm long communication cable with USB A and RS232 connectors. It operates b/w -20°C to 80°C, making it suitable for various electrical applications.
152660404
Molex 152660404 is a FLAT FLEXIBLE CABLE with 38 conductors, rated for 60V and 0.5A. Operating from -40 to 105 °C, it's ideal for applications requiring a compact, low-profile wiring solution in tight spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3365/10SF
The 3m Electronic Products Division 3365/10SF is a UL-approved flat flexible cable with 10 conductors, each made of tinned copper. Featuring a stranded construction with 7X36 stranding and PVC insulation, it operates b/w -20°C to 105°C. Ideal for electrical applications requiring a rated voltage of 300V in various industries.
3365/14-300SF
CABLE ASSEMBLY; Rated Voltage: 300 V; Shielding: NO; Construction: STRANDED; Length: 91.44 mm; Wire & Cable Name: FLAT FLEXIBLE CABLE;
3365/26
The 3m Electronic Products Division's 3365/26 is a UL-approved FLAT FLEXIBLE CABLE with 26 conductors of TINNED COPPER. Featuring STRANDED construction, it has a rated voltage of 300V and operates b/w -20°C to 105°C. Ideal for electrical wiring applications requiring flexibility and durability in various environments.
3365/26300
WIRE AND CABLE;
3365/16-300SF
3m Electronic Products Division's 3365/16-300SF is a FLAT FLEXIBLE CABLE with 7 STRANDED conductors, TIN finish, and UL/CUL approvals. Rated at 300V, it has a wire gauge of 28 AWG and length of 91.44mm. Ideal for electrical applications requiring flexibility and durability in confined spaces.
3365/10300
3365/20300
3365/10
The 3m Electronic Products Division's 3365/10 is a UL-approved FLAT FLEXIBLE CABLE with 10 TINNED COPPER conductors. Featuring STRANDED construction, it has a rated voltage of 300V and operates b/w -20 to 105 °C. Ideal for applications requiring flexibility and durability in electrical wiring setups.
3365/14
3365/14 by 3m Electronic Products Division is a UL approved stranded electrical wire with a rated voltage of 300V. It features tinned copper conductors, polyvinyl chloride insulation, and can operate in temperatures ranging from -20 to 105 °C. This flat flexible cable with 14 conductors is suitable for various wire and cable applications.
3365/40SF
The 3m Electronic Products Division's 3365/40SF is a UL-approved FLAT FLEXIBLE CABLE with TINNED COPPER conductor material. Featuring 40 conductors of 28 AWG, it has a STRANDED construction and operates b/w -20 to 105 °C. Ideal for electrical applications requiring flexibility and durability.
3365/50
The 3m Electronic Products Division's 3365/50 is a UL-approved FLAT FLEXIBLE CABLE with 50 conductors of TINNED COPPER. Featuring STRANDED construction, it has a rated voltage of 300V and operates b/w -20 to 105 °C. Ideal for applications requiring flexibility and multiple connections in limited spaces.
3365/16300
3365/06-300SF
3m Electronic Products Division's 3365/06-300SF is a FLAT FLEXIBLE CABLE with 7 STRANDED conductors, TIN finish, and UL/CUL approvals. Rated at 300V, AWG 28 gauge, it's ideal for electrical applications requiring flexibility in confined spaces.
3365/10-300SF
3m Electronic Products Division's 3365/10-300SF is a FLAT FLEXIBLE CABLE with 7 STRANDED conductors, TIN finish, and UL/CUL approvals. Rated at 300V with AWG 28 gauge, it's ideal for electrical wiring applications requiring flexibility in confined spaces.
3365/40-300SF
CABLE ASSEMBLY; Rated Voltage: 300 V; Shielding: NO; No. of Conductors: 7; Construction: STRANDED; Wire Gauge (AWG): 28;
3365/16-100SF
CABLE ASSEMBLY; Rated Voltage: 300 V; Shielding: NO; Length: 30.48 mm; Wire & Cable Name: FLAT FLEXIBLE CABLE; Approvals (V): CUL, UL;
3365/09-100SF
3m Electronic Products Division's 3365/09-100SF is a FLAT FLEXIBLE CABLE with 7 STRANDED conductors, TIN finish, and rated at 300V. It is UL and CUL approved, suitable for electrical applications requiring flexibility in confined spaces due to its construction and length of 30.48mm.
3365/16SF
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Wire Gauge (AWG): 28; Conductor Material: TINNED COPPER; Minimum Operating Temperature: -20 Cel;
3365/10-100SF
CABLE ASSEMBLY; Rated Voltage: 300 V; Shielding: NO; Wire & Cable Name: FLAT FLEXIBLE CABLE; Approvals (V): CUL, UL; Conductor Finish: TIN;
3365/15SF
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Construction: STRANDED; Stranding: 7X36; Wire & Cable Name: FLAT FLEXIBLE CABLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved