Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
A121K12KZQ
Electro Switch
A121K12KZQ by Electro Switch is a SPDT toggle switch with stainless steel housing and brass terminals. It has an electrical life of 60000 cycles, insulation resistance of 1000000000 ohms, and can handle up to 3A@250VAC. Ideal for applications requiring a durable locking lever actuated switch with ON-OFF-ON contact function.
25 deg
CHROME
.66 inch
BRASS
LOCKING LEVER
6.604 inch
8.89 mm
12.7 mm
.437 inch
1/4-40
COIN SILVER
3A@250VAC
3 A
6 A
6A@28VDC
ON-OFF-ON
10 mohm
250 V
28 V
1400VAC
60000 Cycle(s)
STAINLESS STEEL
1000000000 ohm
DIALLYL PHTHALATE
A
PANEL MOUNT
EPOXY
SPDT
TOGGLE SWITCH
.156 inch
SOLDER LUG
7301K9AV2BE
C & K Components
7301K9AV2BE Toggle Switch by C & K Components features a STAINLESS STEEL housing, COPPER ALLOY terminals, and 3PDT switch function. With MIL-STD solderability and 100000 electrical life cycles, it is ideal for applications requiring a reliable ON-ON contact function in temperatures ranging from -30 to 85 °C.
NATURAL ALUMINUM
.634 inch
COPPER ALLOY
GOLD OVER NICKEL
0.4VA@20VDC
ON-ON
1000VRMS
100000 Cycle(s)
e4
THROUGH HOLE-RIGHT ANGLE
85 Cel
-30 Cel
9
MIL-STD
3PDT
.125 inch
SOLDER
M2032LL1W01
Nkk Switches
M2032LL1W01 by Nkk Switches is a 3PDT toggle switch with STAINLESS STEEL housing. It has a max AC contact current of 3A@250VAC and operates b/w -15 to 85 °C. Ideal for applications requiring a durable, high-performance switch with ON-ON contact function and LOCKING LEVER actuator.
NICKEL
.65 inch
ANTIROTATION DESIGN
17.5006 inch
41.6814 mm
13.0048 mm
.25 inch
.381 inch
SILVER
1500VAC
25000 Cycle(s)
-15 Cel
WAVE
HORIZONTAL
GOLD OVER NICKEL/SILVER
.157 inch
M2033LL1W01
M2033LL1W01 by Nkk Switches is a 3PDT toggle switch with STAINLESS STEEL housing. It has a max AC contact current of 3A@250VAC and an electrical life of 25,000 cycles. Ideal for applications requiring ON-OFF-ON functionality in environments with temperatures ranging from -15 to 85 °C.
M2043LL1W01
M2043LL1W01 by Nkk Switches is a 4PDT toggle switch with STAINLESS STEEL housing and COPPER ALLOY terminals. With an electrical life of 25,000 cycles, it is ideal for applications requiring a durable switch such as industrial machinery control panels. The switch has a max AC contact current of 3A@250VAC and operates within a temperature range of -15 to 85 °C.
22.3012 inch
4PDT
4-6437630-0
TE Connectivity
TE Connectivity 4-6437630-0 is a SPDT toggle switch with 50000 cycles electrical life. With insulation resistance of 1000000000 ohm, it is waterproof and suitable for panel mounting applications. Featuring locking lever actuator, it has max AC/DC contact current of 0.4A@20V and operates b/w -20 to 70 °C temperatures.
8 inch
BLACK
10.5 mm
14.8 mm
GOLD
.02A@20VAC
.4 A
.02A@20VDC
20 V
1500
50000 Cycle(s)
70 Cel
-20 Cel
WATER PROOF
LATCHED
SOLDER AND WIRE
12146-2VX778
Apem Components
12146-2VX778 by Apem Components is a DPDT toggle switch with IP67 sealing, ideal for splash-proof applications. Featuring gold-plated end contacts and silver alloy center contacts, it offers an electrical life of 20,000 cycles. With a max AC contact current of 4A@125VAC and DC contact current of 4A@28VDC, this switch is suitable for panel mount-threaded installations.
26 deg
.681 inch
16 inch
15.1 mm
16 mm
.429 inch
.409 inch
15/32-32
SILVER ALLOY
4A@125VAC
4 A
4A@28VDC
125 V
2000VRMS
20000 Cycle(s)
PANEL MOUNT-THREADED
-40 Cel
BULK
EPOXY TERMINAL SEALED; IP67; SPLASH PROOF
DPDT
.161 inch
12246-2VX778
12246-2VX778 by Apem Components is a DPDT toggle switch with IP67 sealing. It has an electrical life of 20,000 cycles and insulation resistance of 1G ohm. Ideal for applications requiring a splash-proof, locking lever actuated switch with gold-plated contacts.
12246
THROUGH HOLE-STRAIGHT
6
.338 inch
12149A-3V
12149A-3V by Apem Components is a DPDT toggle switch with electrical life of 50,000 cycles. It has a body width of 14 inch and sealing with EPOXY TERMINAL SEAL. Ideal for applications requiring a locking lever actuator, this switch can handle up to 4A@125VAC AC max rating R load.
14 inch
13.7 mm
14 mm
4A@30VDC
30 V
12000
EPOXY TERMINAL SEALED
26ET61-T-F
Honeywell Sensing And Control
Honeywell Sensing And Control's 26ET61-T-F is a DPDT toggle switch with LOCKING LEVER actuator. It has a max DC contact voltage of 28V and can handle up to 4A@28VDC. Ideal for applications requiring ON-ON contact function, such as panel-mounted devices needing latched switch action.
3TL32-1-3D
The Honeywell Sensing And Control 3TL32-1-3D is a 3PDT toggle switch with LOCKING LEVER actuator. It has a max DC contact voltage of 28V and can handle up to 10A@28VDC. Ideal for panel mounting applications requiring a latched switch action with wire termination.
10 A
10A@28VDC
TL
WIRE
MS27720-23-1G
Otto Engineering
Otto Engineering's MS27720-23-1G is a SPDT toggle switch with 30000 cycles electrical life. It features moisture and water-proof sealing, suitable for panel mount-threaded applications. With a max AC contact voltage of 115V and DC contact current of 5A, it operates b/w -65°C to 85°C temperatures.
13.59 inch
18.8 mm
14.61 mm
5A@115VAC
5 A
5A@28VDC
115 V
30000 Cycle(s)
-65 Cel
MOISTURE PROOF; WATER PROOF
112TW1-70E
112TW1-70E by Honeywell Sensing And Control is a DPDT toggle switch with a locking lever actuator. It has a max AC contact current of 5A at 115VAC and DC contact current of 5A at 28VDC. Ideal for panel mounting applications requiring momentary switch action.
TW
MOMENTARY
2TL1-1D
2TL1-1D by Honeywell is a DPDT toggle switch with sealing for dust and water proofing. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. Ideal for applications requiring a locking lever actuator, such as panel-mounted threaded installations in environments up to 71°C.
23.11 inch
34.29 mm
34.04 mm
15A@125VAC
15 A
20 A
20A@28VDC
71 Cel
DUST PROOF; WATER PROOF
SCREW
2TL1-1E
2TL1-1E by Honeywell Sensing And Control is a DPDT toggle switch with locking lever actuator. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. With dust-proof and water-proof sealing, it is ideal for panel mount-threaded applications requiring a latched switch action.
2TL1
2TL1-1L
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LOCKING LEVER; Maximum DC Contact Current: 20 A; AC Maximum Rating R Load (Contact): 15A@125VAC;
2TL1-2F
2TL1-2F by Honeywell Sensing And Control is a toggle switch with a body width of 23.11in and a body height of 34.29mm. It has a max operating temperature of 71°C and can handle a max AC contact current of 15A. This switch is commonly used for panel mounting in applications that require dustproof and waterproof sealing.
DPST
2TL1-2G
2TL1-2G by Honeywell Sensing And Control is a DPST toggle switch with sealing for dust and water proofing. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. Ideal for applications requiring a locking lever actuator, such as panel mount-threaded installations in environments up to 71°C.
2TL1-31K
2TL1-31K by Honeywell Sensing And Control is a DPDT toggle switch with sealing for dust and water proofing. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. Ideal for applications requiring a locking lever actuator, such as panel mount-threaded installations in environments up to 71°C.
2TL1-3F
2TL1-3F by Honeywell Sensing And Control is a DPDT toggle switch with dust and water proof sealing. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. Ideal for applications requiring a latched switch function, such as panel mount-threaded installations in environments with temperature ranges from -65°C to 71°C.
34 deg
.68 inch
.427 inch
.47 inch
1HP@250VAC
2TL1-3G
2TL1-3G by Honeywell Sensing And Control is a DPDT toggle switch with sealing for dust and water proofing. It has a max AC contact current of 15A@125VAC, DC contact current of 20A@28VDC, and can operate in temperatures ranging from -65 to 71 °C. Ideal for applications requiring a latched switch function in harsh environments.
2TL1-5F
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LOCKING LEVER; DC Maximum Rating R Load (Contact): 18A@28VDC; Maximum Operating Temperature: 71 Cel;
11A@125VAC
11 A
18 A
18A@28VDC
LATCHED AND MOMENTARY
2TL1-6F
2TL1-6F by Honeywell Sensing And Control is a DPST toggle switch with sealing for dust and water proofing. It has a max AC contact current of 11A@125VAC and DC contact current of 18A@28VDC. Ideal for applications requiring a locking lever actuator, such as panel mount-threaded installations in environments up to 71°C.
2TL1-7E
2TL1-7E by Honeywell Sensing And Control is a toggle switch with a body width of 23.11in and length (bushing) of 0.47in. It is dustproof and waterproof, making it suitable for various applications such as panel mounting in harsh environments.
(ON)-OFF-(ON)
2TL1-8F
2TL1-8F by Honeywell Sensing And Control is a DPDT toggle switch with sealing for dust and water proofing. It has a max AC contact current of 11A@125VAC and DC contact current of 18A@28VDC. Ideal for applications requiring a locking lever actuator, such as panel mount-threaded installations in environments up to 71°C.
11TW8-3G
11TW8-3G by Honeywell Sensing And Control is a SPDT toggle switch with sealing for dust and water proofing. It has a max AC contact current of 5A@125VAC, suitable for panel mount-threaded applications. The switch features a locking lever actuator and latched switch action, making it ideal for industrial use.
5A@125VAC
11TW8
2NT1-3D
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): LOCKING LEVER; Body Width: 22.61 inch; Termination Type: SCREW;
22.61 inch
33.53 mm
15A@277VAC
277 V
2NT1
102TL2-6F
102TL2-6F by Honeywell is a DPDT toggle switch with sealing for dust and water proofing. It has a max AC contact current of 7.5A@125VAC and DC contact current of 7.5A@28VDC. Ideal for applications requiring a locking lever actuator, such as panel-mounted threaded installations in environments with exposure to dust and water.
37.34 mm
7.5A@125VAC
7.5 A
7.5A@28VDC
102TL2
12TW8-3F
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LOCKING LEVER; Contact Function: ON-ON; Terminal Length: .1 inch;
28 deg
1.16 inch
LOCKED OUT OF CENTER POS
18.79 mm
12TW8
.1 inch
1TL343-5K
1TL343-5K by Honeywell Sensing And Control is a SPDT toggle switch with locking lever actuator. It has a body width of 15.75in and sealing for dust and water proofing. With max AC contact current of 15A@125VAC, it is ideal for panel mount-threaded applications requiring latched and momentary switch action.
15.75 inch
41.91 mm
28.45 mm
15A@28VDC
1TL343
4NT1-1A
4NT1-1A by Honeywell Sensing And Control is a toggle switch with a body width of 33.53in and a body height of 34.29mm. It has a max AC contact current of 15A and is used for panel mount-threaded applications.
33.53 inch
41.66 mm
4NT1-3D
4NT1-3D by Honeywell Sensing And Control is a 4PDT toggle switch with dust and water-proof sealing. It has a max AC contact current of 15A@277VAC, suitable for panel mount-threaded applications. With a locking lever actuator and latched switch action, it operates at temperatures up to 71°C.
4NT1
102TL2-3
The Honeywell Sensing And Control 102TL2-3 Toggle Switch features DPDT switch function, dust and water-proof sealing, and a locking lever actuator. With a max AC contact current of 15A@115VAC and DC contact current of 20A@28VDC, it is ideal for panel mount-threaded applications requiring a latched switch action.
15A@115VAC
1NT1-1A
1NT1-1A by Honeywell Sensing And Control is a SPDT toggle switch with a locking lever actuator. It has a body width of 15.75in, sealing for dust and water proofing, and can handle up to 15A@277VAC. Ideal for panel mounting applications requiring a latched switch action in environments with max operating temperature of 71°C.
23.11 mm
1NT1-1N
1NT1-1N by Honeywell Sensing And Control is a SPDT toggle switch with a body width of 15.75in and sealing for dust and water proofing. It has a max AC contact current of 15A@277VAC, making it ideal for panel mount-threaded applications requiring a latched switch action.
1NT1-2D
1NT1-2D by Honeywell Sensing And Control is a SPST toggle switch with a locking lever actuator. It has a max AC contact current of 15A@277VAC and is dust-proof and water-proof, making it suitable for panel mount-threaded applications requiring latched switch action.
SPST
1NT1-2G
1NT1-2G by Honeywell Sensing And Control is a SPST toggle switch with a locking lever actuator. It has a max AC contact current of 15A@277VAC and operates at temperatures up to 71°C. Ideal for applications requiring dust-proof, water-proof sealing, it features a latched switch action and screw termination type for panel mount-threaded installation.
1NT1-3D
1NT1-3D by Honeywell Sensing And Control is a SPDT toggle switch with sealing for dust and water proofing. It has a max AC contact current of 15A@277VAC, suitable for panel mount-threaded applications. With a locking lever actuator, this switch operates at temperatures up to 71°C.
1NT1-3F
1NT1-3F by Honeywell Sensing And Control is a SPDT toggle switch with a locking lever actuator. It has a max AC contact current of 15A@277VAC and is dust-proof and water-proof, suitable for panel mount-threaded applications. With dimensions of 15.75" x 23.11mm x 28.45mm, it operates at temperatures up to 71°C, making it ideal for various industrial uses.
1NT1-7E
1NT1-7E by Honeywell Sensing And Control is a SPDT toggle switch with dust and water-proof sealing. It has a max AC contact current of 10A@277VAC, suitable for panel mount-threaded applications. With a locking lever actuator, it operates at temperatures up to 71°C.
10A@277VAC
12146AD2GK-2V
The Apem Components 12146AD2GK-2V is a DPDT toggle switch with electrical life of 20000 cycles. It has a body width of 14 inch and sealing for dust and water proofing. Ideal for applications requiring a latched switch function, with max AC contact current of 4A@125VAC.
12146AGK-2V
12146AGK-2V by Apem Components is a DPDT toggle switch with electrical life of 50,000 cycles. It has a body width of 14" and sealing for dust and water proofing. Ideal for applications requiring a latched switch function in environments with temperatures ranging from -40°C to 85°C.
12146AK-1V
12146AK-1V by Apem Components is a DPDT toggle switch with electrical life of 50,000 cycles. It has a body width of 14in and sealing for dust and water proofing. Ideal for applications requiring a latched switch function, such as panel-mounted threaded installations in environments with temperatures ranging from -40°C to 85°C.
11TW1-3
11TW1-3 by Honeywell Sensing And Control is a SPDT toggle switch with a body width of 13.59in and sealing for dust proofing. It has a max AC contact current of 5A, making it suitable for applications requiring reliable switching in harsh environments. The switch features gold plating on end contacts and silver alloy material, with an operating temperature range from -65°C to 71°C.
UL, CSA CERTIFIED
16.76 mm
.24 inch
11TW1
DUST PROOF
1TL1-2D
1TL1-2D by Honeywell is a SPST toggle switch with a locking lever actuator. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. Ideal for applications requiring dust-proof sealing, it features screw termination and panel mount-threaded mounting for secure installation.
29.46 mm
Gold (Au)
1TL1-1A
1TL1-1A by Honeywell is a SPDT toggle switch with dust-proof sealing. It has a body width of 15.75", max AC contact current of 15A, and operates b/w -65 to 71°C. Ideal for applications requiring ON-OFF-ON functionality, it features a locking lever actuator and screw termination type for panel mounting.
1.05 inch
LOCKED IN THREE POSITIONS
SILVER CADMIUM OXIDE
1TL1-1D
1TL1-1D by Honeywell Sensing And Control is a 15A toggle switch with SPDT function. Featuring dust-proof sealing, it has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. Ideal for panel mounting applications, this locking lever switch is latched and screw terminated.
1TL1-1E
1TL1-1E by Honeywell Sensing And Control is a SPDT toggle switch with gold-plated contacts. It has a sealing rating of DUST PROOF and can handle up to 15A@125VAC. Ideal for applications requiring a latched switch function in environments with dust exposure.
31 deg
© 2023 All rights reserved
