Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
2TL1-2G by Honeywell Sensing And Control is a DPST toggle switch with sealing for dust and water proofing. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. Ideal for applications requiring a locking lever actuator, such as panel mount-threaded installations in environments up to 71°C.
Median Price
$95.600
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
TTI
1+ parts
$74.560
100+ parts
$64.550
1k+ parts
$63.280
10k+ parts
-
Chip1Stop
$84.300
Newark
$93.950
$77.180
Farnell
$94.880
Mouser Electronics
$96.320
$73.750
DigiKey
$96.330
Verical
$98.165
$78.612
Element14
$115.150
Nova Conductors
$64.392
Electro Sonic
$76.600
$57.160
$56.880
FDH Electronics
$116.022
$82.873
$75.667
$74.586
IBS Electronics
$117.025
$92.355
Electro Enterprises
$149.171
$102.373
$90.017
$98.509
Vyrian
VNN
Kallista Electronics Ltd
AZTECH Wire
$15.038
Ampacity Inc.
$63.210
Netroflash
Continental Prestige Electronics
$83.190
Argo Parts USA
Assy Fe
Perfect Parts
The larger body width provides a sturdy and durable construction that can withstand heavy usage.
The dust-proof and water-proof sealing ensures reliable performance in various environments, making this toggle switch suitable for outdoor or industrial applications.
DPST switch function allows controlling two separate circuits simultaneously, providing versatility in usage.
With a high maximum operating temperature, this toggle switch can perform efficiently in elevated temperature conditions.
The high AC contact current rating of 15A makes this toggle switch suitable for handling moderate to high power loads.
The locking lever actuator ensures the switch position remains secure, preventing accidental toggling and ensuring reliable operation.
The high DC contact voltage rating of 28V allows for safe and efficient control of DC circuits within this voltage range.
The toggle switch design offers easy manual operation with a simple on/off mechanism, making it user-friendly for various applications.
The threaded panel mounting feature enables easy and secure installation on panels, ensuring stability and ease of use.
Toggle Switches 2TL1-2G attributes and parameters. Explore more Toggle Switches devices from Honeywell Sensing And Control
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Manufacturer Series:
Mounting Feature:
Maximum Operating Temperature:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
2TL1-2G Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.65
SB
Honeywell traces its roots to 1885 with Albert Butz's firm, Butz-Thermo Electric Regulator, which produced a predecessor to the modern thermostat. Today, Honeywell is a global multi-industry behemoth with one of the largest installed bases of equipment. The firm operates through four business segments, including aerospace, building technologies, performance materials and technologies, and safety and productivity solutions. In recent years, the firm has made several portfolio changes, including the addition of Intelligrated in 2016, as well as the spins of Garrett Technologies and Resideo in 2018. In 2019, the firm launched Honeywell Forge, its enterprise performance management software solution that leverages the firm's domain expertise in buildings, airlines, and critical infrastructure.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
SN6505BDBVR
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
1552200253
Molex
WIRE AND CABLE;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Sprague
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1520228-4
Tyco Electronics Amp
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): BATON TYPE; Body Width: 26.21 inch; Maximum AC Contact Voltage: 125 V;
MS90310-271
Otto Engineering
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): LEVER; Termination Type: SOLDER; Minimum Operating Temperature: -55 Cel;
61NT1-3
Honeywell Sensing And Control
61NT1-3 by Honeywell Sensing And Control is a SPDT toggle switch with IP67/IP68 sealing. It has a max AC contact current of 15A@115VAC and DC contact current of 20A@28VDC. Ideal for panel mounting applications, this switch features a standard lever actuator and latched switch action.
5-6437630-3
TE Connectivity
TE Connectivity 5-6437630-3 Toggle Switch offers waterproof sealing, SPDT switch function, and 6A max AC contact current. Ideal for panel mounting applications requiring high insulation resistance of 1Gohm, copper alloy end contact material, and silver plating on center contacts.
MS90310-221
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): LEVER; JESD-609 Code: e4; Maximum Operating Temperature: 71 Cel;
7103MD9ABE
Itt Cannon
7103MD9ABE by ITT Cannon is a SPDT toggle switch with gold over nickel plating, suitable for ON-OFF-ON applications. Featuring a stainless steel housing and copper alloy terminals, it has an electrical life of 40k cycles. With a max DC power rating of 0.4VA at 20VDC, this switch operates in temperatures ranging from -30 to 85°C.
8530K11
Eaton Corporation
The Eaton Corporation 8530K11 Toggle Switch has an electrical life of 50k cycles, IP68 sealing, and SPST switch function. With a max AC contact current of 11A@115VAC, it is ideal for panel mount applications requiring a durable and environmentally sealed switch with a lever actuator.
TT11DGPC104
TOGGLE SWITCH; Manufacturer Series: TT;
LT-1561-143-012
Carling Technologies
TOGGLE SWITCH;
7301SYAW4SE
C & K Components
7301SYAW4SE by C & K Components is a 3PDT toggle switch with CHROME actuator and STAINLESS STEEL housing. It has an electrical life of 100,000 cycles, insulation resistance of 1G ohm, and can handle up to 2A AC current. Ideal for applications requiring reliable switching in harsh environments.
8531K32
The Eaton Corporation 8531K32 is a rugged DPDT toggle switch with IP68 sealing, suitable for harsh environments. It offers a long electrical life of 50,000 cycles and can handle up to 11A AC or 18A DC current. Ideal for panel mounting applications requiring reliable momentary switch action in temperatures ranging from -46°C to 66°C.
1TL176-3
1TL176-3 by Honeywell Sensing And Control is a SPDT toggle switch with a lever actuator. It has a body width of 15.75" and sealing for dust and water proofing. With max AC contact current of 15A@125VAC, it is ideal for panel mount-threaded applications requiring latched switch action.
3636NF
Apem Components
GT13MAVBE
TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): TOGGLE; Contact Function: ON-ON; Solderability: MIL-STD;
7215SYZQE
7215SYZQE by ITT Cannon is a DPDT toggle switch with a stainless steel housing and copper alloy terminals. It has an electrical life of 40,000 cycles and insulation resistance of 1G ohm. Ideal for applications requiring a momentary switch action, with max AC contact voltage of 120V and DC contact current of 5A.
5-1437562-1
TE Connectivity 5-1437562-1 is a DPDT toggle switch with 60000 cycles electrical life. It features EPOXY sealing, gold end contact material, and SILVER plating. Ideal for applications requiring a latched ON-ON switch function with 3A max AC/DC contact current at 125V/28V and -30 to 85°C operating temperature range.
MS35059-23
The Eaton Corporation MS35059-23 is a DPDT toggle switch with 19.05" body width and 26.92mm height, suitable for panel mount-threaded applications. It has a max AC contact current of 20A@115VAC and DC contact current of 20A@28VDC, making it ideal for ON-ON contact functions in various electronic systems.
8530K33
The Eaton Corporation 8530K33 Toggle Switch has a long electrical life of 50000 cycles and is environmentally sealed with an IP68 rating. It features SPDT switch function, operates at temperatures ranging from -46 to 66 °C, and can handle up to 15A@115VAC AC max rating R load. Ideal for panel mounting applications requiring a durable and reliable toggle switch.
2TL1-6
2TL1-6 by Honeywell Sensing And Control is a DPST toggle switch with a max AC contact current of 10A and DC contact voltage of 28V. It features a standard lever actuator and screw termination, making it ideal for ON-OFF applications in systems requiring up to 277V AC or 18A DC.
8373K107
Eaton Corporation's 8373K107 is a DPDT toggle switch with 7A@125VAC/DC contact ratings. Featuring a lever actuator, it is panel mount-threaded for solder termination. Ideal for applications requiring latched switch action and max voltage/current of 125V/7A in AC or DC circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2TL1-3D
2TL1-3D by Honeywell Sensing And Control is a DPDT toggle switch with dust and water-proof sealing. It has a max AC contact current of 15A@115VAC and DC contact current of 20A@28VDC. Ideal for applications requiring a latched switch function, such as panel-mounted threaded installations in environments with temperature ranges from -65°C to 71°C.
2TL1-3
2TL1-3 by Honeywell Sensing And Control is a DPDT toggle switch with dust-proof sealing. It has a body width of 22.6in, max AC contact current of 15A, and operates b/w -65 to 71°C. Ideal for panel mounting applications requiring a latched switch function with screw termination type.
2TL1-2D
2TL1-2D toggle switch by Honeywell Sensing And Control features DPST switch function, with a body width of 22.6in and sealing for dust and water proofing. It has a max AC contact current of 15A@115VAC, DC contact current of 20A@28VDC, and operates at temperatures up to 71°C. Ideal for applications requiring a latched toggle switch with screw termination, suitable for panel mount-threaded installations.
2TL1-2
The Honeywell 2TL1-2 toggle switch features DPST switch function, 15A@115VAC AC rating, and 20A@28VDC DC rating. With a dust-proof seal and lever actuator, it is ideal for panel mount applications requiring latched switch action.
2TL1-3G
2TL1-3G by Honeywell Sensing And Control is a DPDT toggle switch with sealing for dust and water proofing. It has a max AC contact current of 15A@125VAC, DC contact current of 20A@28VDC, and can operate in temperatures ranging from -65 to 71 °C. Ideal for applications requiring a latched switch function in harsh environments.
2TL1-3F
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LOCKING LEVER; Contact Function: ON-ON; Body Height: 34.29 mm;
2TL1-31
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; Termination Type: SCREW; Maximum DC Contact Current: 20 A;
2TL1-7
2TL1-7 toggle switch by Honeywell Sensing And Control is a dust-proof SPDT switch with a lever actuator. It has a max AC contact current of 11A@125VAC and a max DC contact current of 18A@28VDC. This toggle switch is suitable for panel mount-threaded applications.
2TL1-1
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; Maximum AC Contact Current: 15 A; Termination Type: SCREW;
2TL1-21
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPST; Type (Actuator): LEVER; Maximum DC Contact Current: 20 A; Switch Action: LATCHED;
2TL1-1E
2TL1-1E by Honeywell Sensing And Control is a DPDT toggle switch with locking lever actuator. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. With dust-proof and water-proof sealing, it is ideal for panel mount-threaded applications requiring a latched switch action.
2TL1-12A
2TL1-12A by Honeywell is a SPDT toggle switch with a lever actuator. It has a body width of 23.11in and sealing for dust and water proofing. With max AC contact current of 15A@277VAC, it's ideal for panel mount-threaded applications requiring latched switch action.
2TL1-7E
2TL1-7E by Honeywell Sensing And Control is a toggle switch with a body width of 23.11in and length (bushing) of 0.47in. It is dustproof and waterproof, making it suitable for various applications such as panel mounting in harsh environments.
2TL1-8
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; Maximum DC Contact Current: 18 A; Body Length/Diameter: 34.04 mm;
2TL1-70
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; AC Maximum Rating R Load (Contact): 11A@125VAC; Body Length/Diameter: 34.04 mm;
2TL1-50N
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; Body Length/Diameter: 34.04 mm; Body Width: 23.11 inch;
TOGGLE SWITCH; Switch Function: DPST; Type (Actuator): STANDARD LEVER; Contact Function: ON-OFF; Maximum AC Contact Current: 10 A; Maximum AC Contact Voltage: 277 V;
2TL1-70E
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; DC Maximum Rating R Load (Contact): 18A@28VDC; Maximum DC Contact Voltage: 28 V;
2TL1-10A
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): LEVER; Maximum AC Contact Voltage: 125 V; Maximum AC Contact Current: 15 A;
2TL1-31K
2TL1-31K by Honeywell Sensing And Control is a DPDT toggle switch with sealing for dust and water proofing. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. Ideal for applications requiring a locking lever actuator, such as panel mount-threaded installations in environments up to 71°C.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved