Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
SHL-W55-01
Omron
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): SHORT HINGE LEVER; Minimum Operating Temperature: -10 Cel; Switch Action: MOMENTARY;
11
SHORT HINGE LEVER
17.5 inch
32.9 mm
73.5 mm
.1A@125VAC
.1 A
.1A@30VDC
125 V
30 V
500000 Cycle(s)
SHL
PANEL MOUNT
3.14 N
80 Cel
-10 Cel
8 mm
IP67
MOMENTARY
SPST
SNAP ACTING/LIMIT SWITCH
SCREW
SHL-W55
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): SHORT HINGE LEVER; Termination Type: SCREW; Body Length/Diameter: 73.5 mm;
35.9 mm
10A@250VAC
10 A
10A@14VDC
250 V
14 V
TZ-1GV22
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE ROLLER LEVER; Maximum Pre Travel: 1.5 mm; AC Maximum Rating R Load (Contact): 1A@250VAC;
3.4
SHORT HINGE ROLLER LEVER
17.4 inch
21.8 mm
49.2 mm
1A@250VAC
1 A
1A@30VDC
50000 Cycle(s)
TZ
2.35 N
400 Cel
-65 Cel
1.5 mm
IP00
SPDT
Nickel (Ni)
TZ-1GV2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; Maximum AC Contact Current: 1 A; Maximum Operating Force: 1.27 N;
6.1
HINGE ROLLER LEVER
1.27 N
2.6 mm
TZ-1GV
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Body Height: 21.8 mm; Manufacturer Series: TZ;
8.1
HINGE LEVER
.98 N
3.5 mm
TZ-1G
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Electrical Life: 50000 Cycle(s); Body Width: 17.4 inch;
.53
PIN PLUNGER
4.9 N
.4 mm
V-10G-1E4-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum Operating Force: .98 N; Maximum Pre Travel: 1.2 mm;
2.5
10.3 inch
15.9 mm
27.8 mm
.1A@125VDC
300000 Cycle(s)
V
-25 Cel
1.2 mm
SOLDER
V-15G1-1E5-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Manufacturer Series: V; Maximum Operating Force: 1.96 N;
15A@250VAC
15 A
100000 Cycle(s)
1.96 N
V-15G2-1E5-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Body Height: 15.9 mm; Maximum DC Contact Current: .1 A;
5.6
1.23 N
3.3 mm
D2F-FL3-D3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Switch Action: MOMENTARY; DC Maximum Rating R Load (Contact): .5A@30VDC;
.5
SIMULATED ROLLER LEVER
5.8 inch
6.5 mm
12.8 mm
1A@125VAC
.5 A
.5A@30VDC
30000 Cycle(s)
.74 N
65 Cel
IP40
D4B-1111N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Termination Type: SCREW; Body Height: 74 mm;
ROLLER LEVER
P.T.= 21 DEG, T.T.= 71 DEG
40 inch
74 mm
43 mm
10A@400VAC
400 V
9.41 N
-40 Cel
DPST
D4B-1115N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): STEEL ROLLER LEVER; Maximum AC Contact Current: 10 A; Body Length/Diameter: 43 mm;
STEEL ROLLER LEVER
D4B-1116N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROLLER LEVER; Switch Action: MOMENTARY; Sealing: IP67;
ADJUSTABLE ROLLER LEVER
D4B-1117N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROD LEVER; Minimum Operating Temperature: -40 Cel; DC Maximum Rating R Load (Contact): 10A@14VDC;
ADJUSTABLE ROD LEVER
2.12 N
D4B-1170N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP PLUNGER; Maximum Operating Force: 18.63 N; Body Width: 40 inch;
7
TOP PLUNGER
18.63 N
2 mm
D4B-1171N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP ROLLER PLUNGER; Body Height: 74 mm; Maximum AC Contact Current: 10 A;
TOP ROLLER PLUNGER
D4B-1187N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): PLASTIC ROD; Body Length/Diameter: 43 mm; Switch Action: MOMENTARY;
PLASTIC ROD
P.T.= 15 DEG, T.T.=15 DEG
1.47 N
D4B-1511N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Sealing: IP67; Switch Action: MOMENTARY;
D4B-1570N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP PLUNGER; Termination Type: SCREW; DC Maximum Rating R Load (Contact): 10A@14VDC;
D4B-1571N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP ROLLER PLUNGER; Minimum Operating Temperature: -40 Cel; Maximum Operating Force: 18.63 N;
D4B-1A11N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Body Height: 74 mm; Maximum Operating Temperature: 80 Cel;
D4B-1A16N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROLLER LEVER; DC Maximum Rating R Load (Contact): 10A@14VDC; Body Height: 74 mm;
D4B-1A71N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP ROLLER PLUNGER; Actuator Travel (mm): 7; Sealing: IP67;
D4B-2111N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Body Height: 74 mm; Maximum AC Contact Current: 10 A;
D4B-2115N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): STEEL ROLLER LEVER; Body Length/Diameter: 43 mm; Maximum DC Contact Voltage: 14 V;
D4B
D4B-2116N
Omron D4B-2116N is a robust snap action/limit switch with DPST function. Featuring IP67 sealing, it offers 500000 cycles electrical life and can handle up to 10A@400VAC AC max rating R load. Ideal for panel mounting applications, it has an adjustable roller lever actuator and operates within -40°C to 80°C temperature range.
D4B-2170N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP PLUNGER; Electrical Life: 500000 Cycle(s); Maximum Operating Temperature: 80 Cel;
D4B-2171N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP ROLLER PLUNGER; Maximum DC Contact Current: 10 A; DC Maximum Rating R Load (Contact): 10A@14VDC;
D4B-2181N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): COIL SPRING TYPE; Minimum Operating Temperature: -40 Cel; Maximum AC Contact Current: 10 A;
COIL SPRING TYPE
D4B-2187N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): PLASTIC ROD; Sealing: IP67; Maximum Operating Temperature: 80 Cel;
D4B-2511N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Switch Action: MOMENTARY; Additional Features: P.T.= 21 DEG, T.T.= 71 DEG;
D4B-2515N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): STEEL ROLLER LEVER; Maximum Operating Force: 9.41 N; Manufacturer Series: D4B;
D4B-2516N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROLLER LEVER; Minimum Operating Temperature: -40 Cel; Body Width: 40 inch;
D4B-2571N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP ROLLER PLUNGER; Body Height: 74 mm; Maximum Operating Force: 18.63 N;
D4B-2A11N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Body Height: 74 mm; AC Maximum Rating R Load (Contact): 10A@400VAC;
D4B-2A15N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): STEEL ROLLER LEVER; Body Length/Diameter: 43 mm; Sealing: IP67;
D4B-2A16N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROLLER LEVER; Body Length/Diameter: 43 mm; Electrical Life: 500000 Cycle(s);
D4B-2A17N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROD LEVER; Maximum Operating Force: 2.12 N; Maximum DC Contact Current: 10 A;
D4B-2A70N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP PLUNGER; Maximum DC Contact Voltage: 14 V; Maximum AC Contact Voltage: 400 V;
D4B-2A71N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP ROLLER PLUNGER; Switch Action: MOMENTARY; Body Width: 40 inch;
D4B-3111N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Termination Type: SCREW; Maximum DC Contact Voltage: 14 V;
D4B-3115N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): STEEL ROLLER LEVER; Maximum DC Contact Voltage: 14 V; Body Height: 74 mm;
D4B-3116N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROLLER LEVER; Minimum Operating Temperature: -40 Cel; Additional Features: P.T.= 21 DEG, T.T.= 71 DEG;
D4B-3117N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROD LEVER; Maximum AC Contact Current: 10 A; Maximum Operating Temperature: 80 Cel;
D4B-3170N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP PLUNGER; Body Height: 74 mm; AC Maximum Rating R Load (Contact): 10A@400VAC;
D4B-3171N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP ROLLER PLUNGER; Switch Action: MOMENTARY; Maximum DC Contact Current: 10 A;
D4B-3181N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): COIL SPRING TYPE; Maximum Operating Temperature: 80 Cel; Maximum DC Contact Voltage: 14 V;
D4B-3511N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Maximum DC Contact Current: 10 A; Additional Features: P.T.= 21 DEG, T.T.= 71 DEG;
© 2023 All rights reserved
